Overclock.net › Forums › AMD › AMD CPUs › Hyper Pi 32m x2 or Prime95 for Stability?
New Posts  All Forums:Forum Nav:

Hyper Pi 32m x2 or Prime95 for Stability?

post #1 of 3
Thread Starter 
hey guys im currently running prime95 for over 20min now and wanted to kno if i should use that or Hyper Pi 32m two times for stability? i had it at x18 and it BSOD with BCCode x124, and my vcore on auto seems to stay at 1.4v as seen in coretemp!

everything in my BIOS is on auto/Defaults except a few things heres a pic botem pic is of idel tempsm

http://imgur.com/a/sFldN

also.. should i have Advance Clock Calibration on? its current disabled in the pic above, i just want to get Optium settings while OC on my stockfan thx..

and here is a pic of load temp
http://i.imgur.com/W3iZW.png
Edited by quarter_breed - 1/24/12 at 3:30pm
post #2 of 3
I use Prime95 to test stability, because you can run at 100% load for longer than HyperPi. - allowing you do a longer stability test.
It doesn't do much, apparently, so Advanced Clock Calibration can remain off.
post #3 of 3
Quote:
Originally Posted by quarter_breed View Post

hey guys im currently running prime95 for over 20min now and wanted to kno if i should use that or Hyper Pi 32m two times for stability? i had it at x18 and it BSOD with BCCode x124, and my vcore on auto seems to stay at 1.4v as seen in coretemp!
everything in my BIOS is on auto/Defaults except a few things heres a pic botem pic is of idel tempsm
http://imgur.com/a/sFldN
also.. should i have Advance Clock Calibration on? its current disabled in the pic above, i just want to get Optium settings while OC on my stockfan thx..
and here is a pic of load temp
http://i.imgur.com/W3iZW.png

Use prime blend to test stability and large fft's if you want to generate maximum heat. A 32mb hyperpi is good for testing initial stability, but not long term.

ACC, aside from unlocking cores, which on an X6 is moot, would only be useful for the original phenom processors; leave it disabled.
Primary
(11 items)
 
  
Reply
Primary
(11 items)
 
  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › Hyper Pi 32m x2 or Prime95 for Stability?