Overclock.net › Forums › Graphics Cards › NVIDIA › Display driver nvlddmkm stopped responding?
New Posts  All Forums:Forum Nav:

Display driver nvlddmkm stopped responding?

post #1 of 4
Thread Starter 
I need some help with this stuff. Just recently I have been getting these black screens for about 2 seconds then proceeds to tell me that display driver has stopped working and has recovered. Seems to happen when I browse the internet a lot of the times. Today I got a blue screen because of it and the computer recovered from a "bug check"

The computer has rebooted from a bugcheck. The bugcheck was: 0x00000116 (0xfffffa800b64d010, 0xfffff880110ebae4, 0xffffffffc000009a, 0x0000000000000004). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 012412-19296-01.

This stuff just started happening over the past month. No overclocks on the video cards and I am running them in SLI. I have since then wiped the system clean and installed the latest drivers from Nvidia but with no luck. Anyone else have ever had this issue?
post #2 of 4
Can you try each card individually?

Also you may want to try a slight bump in GPU voltage to see if that cures it.
jfreeZr
(11 items)
 
hadronGTX
(6 items)
 
 
CPUMotherboardGraphicsRAM
4770K @ 5.2GHz EVGA Z87 Classified EVGA GTX 980 ACX2 2666MHz CL12 DDR3 
Hard DriveCoolingOSMonitor
2x Samsung EVO RAID0 Phase Change Win8.1 64 Catleap 27" 2560x1440 110Hz 
PowerCaseAudio
EVGA SuperNOVA 1000 P2 Primochill Wet Bench Core3D + Sennheiser HD595 + iBasso Amp 
CPUMotherboardRAMHard Drive
Intel 3770K EVGA Z77 Stinger EVGA GeForce GTX 780 Ti ACX 2x Vertex3 SSD 480GB RAID0 
CoolingCase
Corsair H60 EVGA Hadron Hydro 
  hide details  
Reply
jfreeZr
(11 items)
 
hadronGTX
(6 items)
 
 
CPUMotherboardGraphicsRAM
4770K @ 5.2GHz EVGA Z87 Classified EVGA GTX 980 ACX2 2666MHz CL12 DDR3 
Hard DriveCoolingOSMonitor
2x Samsung EVO RAID0 Phase Change Win8.1 64 Catleap 27" 2560x1440 110Hz 
PowerCaseAudio
EVGA SuperNOVA 1000 P2 Primochill Wet Bench Core3D + Sennheiser HD595 + iBasso Amp 
CPUMotherboardRAMHard Drive
Intel 3770K EVGA Z77 Stinger EVGA GeForce GTX 780 Ti ACX 2x Vertex3 SSD 480GB RAID0 
CoolingCase
Corsair H60 EVGA Hadron Hydro 
  hide details  
Reply
post #3 of 4
Thread Starter 
Actually I just tried editing the registry by adding in DWORD "TdrLevel" with a value of 0 in the display drivers section. People say that sometimes does the trick. I will bump the voltage and see if that works. Thanks for the reply.

Edit: Bumped the voltage to 1000mV. Lets hope for the best.
Edited by bgtrance - 1/24/12 at 5:55pm
post #4 of 4
Thread Starter 
You know I think this bump in voltage fixed it, muchos gracias to you sir!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › Display driver nvlddmkm stopped responding?