Overclock.net › Forums › AMD › AMD CPUs › BCCode x101? up vcore or cpu-nb volts?
New Posts  All Forums:Forum Nav:

BCCode x101? up vcore or cpu-nb volts?

post #1 of 11
Thread Starter 
hey guys i got my final min OC on stock fan is 3.4Ghz@1.362v and my cpu-nb@2600mhz@1.275v and my ram is at 1600mhz@1.60v

my question is, i ran prime with the 3.4ghz@1.362v for 9hours, but since i changed my cpu-nb to 2600mhz@1.275 and put in my ram settings 9-9-9-24@1600mhz@1.60v i got a BSOD playin BF3 of x101 meaning to up vcore i do believe it was 20 min in my game, but would overclocking my cpu-nb and putting my ram settings in require more vcore or more volts on my cpu-nb?

upon reboot of BSOD BCCode x101 instead of upping my vcore i upped my cpu-nb volt to 1.287v and hasnt poped up yet.. or it might nott post back if it does, then ill put the cpu-nb volts back to 1.275 and up the vcore to 1.375v.
Edited by quarter_breed - 1/28/12 at 4:57am
post #2 of 11
Usually, and in every case I had, x101 is vcore being insufficient. Raise that core voltage a click or two. thumb.gif
post #3 of 11
Thread Starter 
Quote:
Originally Posted by Smykster View Post

Usually, and in every case I had, x101 is vcore being insufficient. Raise that core voltage a click or two. thumb.gif

Ok I upped it from 1.362 to 1.375 now I'm running hyper pi 32m to see if it passes, I'll prolly do a prime run over night for 8-9 hours
post #4 of 11
Yeah I got a code x101 two nights ago, raised voltage 1 notch and ran prime95 for 12 hrs. No problems since.
post #5 of 11
Thread Starter 
i wonder if it needed more vcore due to me overclocking my cpu-nb? and if so, couldnt i just up the cpu-nb volt from 1.275 to the next one up
post #6 of 11
Isn't stock voltage for the 955 1.4v? You most likely need to bring up your vcore.
My System
(18 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 955 GA-890FXA-UD5 NVIDIA GeForce GTX 560 Ti G.Skill 
RAMHard DriveHard DriveHard Drive
G.Skill Western Digital Samsung F3 Western Digital 
Optical DriveCoolingOSMonitor
Asus DVD Burner Hyper 212+ Windows 7 Pro 64 Asus 27" 1080p 
KeyboardPowerCaseMouse
Logitech Wave Corsair 750TX HAF 922 Logitech MK550 
  hide details  
Reply
My System
(18 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 955 GA-890FXA-UD5 NVIDIA GeForce GTX 560 Ti G.Skill 
RAMHard DriveHard DriveHard Drive
G.Skill Western Digital Samsung F3 Western Digital 
Optical DriveCoolingOSMonitor
Asus DVD Burner Hyper 212+ Windows 7 Pro 64 Asus 27" 1080p 
KeyboardPowerCaseMouse
Logitech Wave Corsair 750TX HAF 922 Logitech MK550 
  hide details  
Reply
post #7 of 11
Thread Starter 
Quote:
Originally Posted by harmor View Post

Isn't stock voltage for the 955 1.4v? You most likely need to bring up your vcore.

Im not too sure lol, I kno my 1090t BE is 1.325 at stock
post #8 of 11
Thread Starter 
Damn.. Just was playin bf3 it froze then my Pc restarted? I changed my ram back to auto Im not sure if that will help
post #9 of 11
0x101 = increase vcore
0x124 = increase/decrease vcore or QPI/VTT...have to test to see which one it is
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1E = increase vcore
0x3B = increase vcore
0xD1 = QPI/VTT, increase/decrease as necessary
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0x1a = Memory Management

Hope this helps.
Jay
(13 items)
 
  
CPUMotherboardGraphicsRAM
FX 8350 4.4Ghz at 1.36v GA 78LMT USB3 Rev 5.0 Sapphire R9 285 OC 16GB Kingston Savage Ram 
Hard DriveHard DriveCoolingOS
1TB Western Digital 500GB Seagate Barracuda Noctua NH-D15S Windows 8.1 
MonitorPowerMouseMouse Pad
Asus MG279Q Fressync OCZ ZS 650 Watt PSU Dragonwar ELE-G9 Dragonwar 
  hide details  
Reply
Jay
(13 items)
 
  
CPUMotherboardGraphicsRAM
FX 8350 4.4Ghz at 1.36v GA 78LMT USB3 Rev 5.0 Sapphire R9 285 OC 16GB Kingston Savage Ram 
Hard DriveHard DriveCoolingOS
1TB Western Digital 500GB Seagate Barracuda Noctua NH-D15S Windows 8.1 
MonitorPowerMouseMouse Pad
Asus MG279Q Fressync OCZ ZS 650 Watt PSU Dragonwar ELE-G9 Dragonwar 
  hide details  
Reply
post #10 of 11
Thread Starter 
i dont even think my OC wants to bet at 1.375v for 3.4Ghz.. this is starting to piss me off lol, i ran prime lastnight to see if 3.4@1.375v cpu-nb@2600mhz@1.275v and my ram 9-9-9-24@1600mhz@1.66v and it failed with another BCCode x101 code.. so i upped the vcore to 1.387v this morning to see how it goes, is there anything else i can do or is it just my retarted cpu not wanting me to OC..

so i upeed it again and is current runniny prime, im gonna let it go for 2-3 hours while it does im reading this webpage abput my mobo,
should i have anti surgy support enable in bios?
and what is CPU VDDA? it goes from 2.50 - 2.80, what does this do? im not sure but i think it might be my boards LLC
Edited by quarter_breed - 1/28/12 at 5:29am
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › BCCode x101? up vcore or cpu-nb volts?