Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Rate My Rig! pls
New Posts  All Forums:Forum Nav:

Rate My Rig! pls - Page 2

post #11 of 44
Thread Starter 
Quote:
Originally Posted by MjrTom
Well for looks I would give it 5/10
You need to hide those cables a bit. Nice PSU same as mine:

http://www.overclock.net/gallery/sho...0/ppuser/21241

Some nice modding though with the front intake fan
thanks
post #12 of 44
Ok i shall.

Specs.

8/10. My reasons would be having 2gb of RAM will benefit the whole system. And my other Reason would be the Motherboard. However if it serves you well for what you do then thats ok.

For looks i woulkd say 8/10. Its not a bad job however wires could look a little better...

The reason for high scores for specs is it depends what he uses it for. If its for general use then its a good system. However for gaming there are a few improvements.
post #13 of 44
Thread Starter 
Quote:
Originally Posted by ENTERPRISE1701
Ok i shall.

Specs.

8/10. My reasons would be having 2gb of RAM will benefit the whole system. And my other Reason would be the Motherboard. However if it serves you well for what you do then thats ok.

For looks i woulkd say 8/10. Its not a bad job however wires could look a little better...
the only real problem i am having is with those wires on the bottom i dont really se them disrputing airflow but they just look gross.. i guess i dont need them there and if i wanted to i could take them out because i rarely use my UV stick on the side and my Lighted feet on the bottomg XD

also i have been looking into an asus p4p800 deluxe? or something like that and its hard as hell to find them :S but i guess thats what i get for still having a S478
post #14 of 44
I think if you stuff as much of that cabling into the HDD cage and maybe braid the cables that cannot be hidden this will make the case look miles better IMO

Nice to see other projects
Desktop
(13 items)
 
  
CPUMotherboardGraphicsRAM
Opteron 165 CCBBE 0615DPMW 2.6GHz (9x290) DFI NF4 SLI-D (HR-05-SLI Passive Chipset Cooler) BFG 8800GTS OC 640MB 620/1860 Mushkin Redline 4x1GB DDR475 (3-3-2-7 2T) 
Hard DriveOptical DriveOSMonitor
3x 74GB WD Raptor (RAID 0) + 2.2TB of SATA HDDs NEC DVD/RW SATA XP Home Edition SP3 IIyama H481S 19' TFT 1280x1024 
KeyboardPowerCaseMouse
Eluminix (Backlight) OCZ Modstream520w 28A,12v Single Rail Antec P182 Razer, Copperhead Blue 
Mouse Pad
Razer Exactamat 
  hide details  
Reply
Desktop
(13 items)
 
  
CPUMotherboardGraphicsRAM
Opteron 165 CCBBE 0615DPMW 2.6GHz (9x290) DFI NF4 SLI-D (HR-05-SLI Passive Chipset Cooler) BFG 8800GTS OC 640MB 620/1860 Mushkin Redline 4x1GB DDR475 (3-3-2-7 2T) 
Hard DriveOptical DriveOSMonitor
3x 74GB WD Raptor (RAID 0) + 2.2TB of SATA HDDs NEC DVD/RW SATA XP Home Edition SP3 IIyama H481S 19' TFT 1280x1024 
KeyboardPowerCaseMouse
Eluminix (Backlight) OCZ Modstream520w 28A,12v Single Rail Antec P182 Razer, Copperhead Blue 
Mouse Pad
Razer Exactamat 
  hide details  
Reply
post #15 of 44
Quote:
p4p800 deluxe
That is a good motherboard..Another one is the SE version of that motherboard.
post #16 of 44
Quote:
Originally Posted by rabies229
the only real problem i am having is with those wires on the bottom i dont really se them disrputing airflow but they just look gross.. i guess i dont need them there and if i wanted to i could take them out because i rarely use my UV stick on the side and my Lighted feet on the bottomg XD

also i have been looking into an asus p4p800 deluxe? or something like that and its hard as hell to find them :S but i guess thats what i get for still having a S478
Ah thats what all that cabling is for.

What I have done in the past is trim the cabling down to required length. Ive done this with molex and fans and it really helps with all that un needed cable.

Obviously only try this if you are completly confident. Dont want to get wires mixed up

For a full rundown of some of the best S478 boards take a look here:

http://www.overclock.net/intel-mothe...herboards.html
Desktop
(13 items)
 
  
CPUMotherboardGraphicsRAM
Opteron 165 CCBBE 0615DPMW 2.6GHz (9x290) DFI NF4 SLI-D (HR-05-SLI Passive Chipset Cooler) BFG 8800GTS OC 640MB 620/1860 Mushkin Redline 4x1GB DDR475 (3-3-2-7 2T) 
Hard DriveOptical DriveOSMonitor
3x 74GB WD Raptor (RAID 0) + 2.2TB of SATA HDDs NEC DVD/RW SATA XP Home Edition SP3 IIyama H481S 19' TFT 1280x1024 
KeyboardPowerCaseMouse
Eluminix (Backlight) OCZ Modstream520w 28A,12v Single Rail Antec P182 Razer, Copperhead Blue 
Mouse Pad
Razer Exactamat 
  hide details  
Reply
Desktop
(13 items)
 
  
CPUMotherboardGraphicsRAM
Opteron 165 CCBBE 0615DPMW 2.6GHz (9x290) DFI NF4 SLI-D (HR-05-SLI Passive Chipset Cooler) BFG 8800GTS OC 640MB 620/1860 Mushkin Redline 4x1GB DDR475 (3-3-2-7 2T) 
Hard DriveOptical DriveOSMonitor
3x 74GB WD Raptor (RAID 0) + 2.2TB of SATA HDDs NEC DVD/RW SATA XP Home Edition SP3 IIyama H481S 19' TFT 1280x1024 
KeyboardPowerCaseMouse
Eluminix (Backlight) OCZ Modstream520w 28A,12v Single Rail Antec P182 Razer, Copperhead Blue 
Mouse Pad
Razer Exactamat 
  hide details  
Reply
post #17 of 44
Thread Starter 
i just cleaned out the bottom removing me UV stick and my lighted feet not nearly as much wires now
post #18 of 44
Thread Starter 
Quote:
Originally Posted by MjrTom
Ah thats what all that cabling is for.

What I have done in the past is trim the cabling down to required length. Ive done this with molex and fans and it really helps with all that un needed cable.

Obviously only try this if you are completly confident. Dont want to get wires mixed up

For a full rundown of some of the best S478 boards take a look here:

http://www.overclock.net/intel-mothe...herboards.html
im subscribed to that
post #19 of 44
Thread Starter 
ill come back and check this in a bit
post #20 of 44
Have you seen my "sticky back plastic mod" Takes away the brushed metal look:

http://www.overclock.net/gallery/sho...0/ppuser/21241
Desktop
(13 items)
 
  
CPUMotherboardGraphicsRAM
Opteron 165 CCBBE 0615DPMW 2.6GHz (9x290) DFI NF4 SLI-D (HR-05-SLI Passive Chipset Cooler) BFG 8800GTS OC 640MB 620/1860 Mushkin Redline 4x1GB DDR475 (3-3-2-7 2T) 
Hard DriveOptical DriveOSMonitor
3x 74GB WD Raptor (RAID 0) + 2.2TB of SATA HDDs NEC DVD/RW SATA XP Home Edition SP3 IIyama H481S 19' TFT 1280x1024 
KeyboardPowerCaseMouse
Eluminix (Backlight) OCZ Modstream520w 28A,12v Single Rail Antec P182 Razer, Copperhead Blue 
Mouse Pad
Razer Exactamat 
  hide details  
Reply
Desktop
(13 items)
 
  
CPUMotherboardGraphicsRAM
Opteron 165 CCBBE 0615DPMW 2.6GHz (9x290) DFI NF4 SLI-D (HR-05-SLI Passive Chipset Cooler) BFG 8800GTS OC 640MB 620/1860 Mushkin Redline 4x1GB DDR475 (3-3-2-7 2T) 
Hard DriveOptical DriveOSMonitor
3x 74GB WD Raptor (RAID 0) + 2.2TB of SATA HDDs NEC DVD/RW SATA XP Home Edition SP3 IIyama H481S 19' TFT 1280x1024 
KeyboardPowerCaseMouse
Eluminix (Backlight) OCZ Modstream520w 28A,12v Single Rail Antec P182 Razer, Copperhead Blue 
Mouse Pad
Razer Exactamat 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Mods
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Rate My Rig! pls