So to start with, my cpu was prime stable. 24 hours prime small and large fft as well as blend at 263x14 (PhII 925) @ 1.45v. I have had this for a few years and play with the OC here and there. I have ran it as high as 1.6v before without problems and temps are fan with my corsair h50 and antec 300. I have been currently working on bringing down my memory timings. I ran prime blend for just over 4 hours last night with mem at (DDR2 1200 GSkill Trident) 438 @ 4-4-4-5-13-2T @ 1.8v before it encountered an error. So today I left it at those timings but turned the voltage up to 2.1v and it ran for over 7 hours before it encountered an error. (CPU temps averaged 52C, occasionally reaching 55C and all other temps were lower). Well after than erred I restarted it and set it to 4-4-4-5-14-2T @ 2.1v and ran prime blend. When I checked on it about 10 minutes later it had erred within minutes and the whole thing had froze up. I restarted it and now it won't turn back on. The psu comes on and the lights and my thermometer work but the fans just idle up and down constantly and it doesn't post. My tv registers that the pc turned on for about a sec then says no signal. Did I kill my mobo or something else? There are pics of my rig in my signature.
Current Rig
(13 items) |
|
Current Rig
(13 items) |
