Overclock.net › Forums › Case Mods & Cases › Computer Cases › Official NZXT Switch 810 thread
New Posts  All Forums:Forum Nav:

Official NZXT Switch 810 thread - Page 1048

Poll Results: Which Color Version are you buying

Poll expired: Feb 28, 2012  
  • 58% (44)
    White/Black
  • 41% (31)
    Black/black
75 Total Votes  
post #10471 of 13812
Quote:
Originally Posted by crazymofo View Post

Hey guys I got few questions regarding this case with watercooling...

1) I really want to fit a XSPC RX360 rad on top but with fans inside of the case too, ie fan attached to the radiator not on top of the case for aesthetics only. But from my research it seems impossible because 60mm + 25mm is to thick & might disturb the motherboard heatsink right? Am I right about this? Any way to overcome this? (note: I only can get xspc radiator brand due to its availability in my country, ordering online will be expensive for shipping fees)

I got my RX360 in "push/pull" up there.







Of course I had to take the top off the case and whip out the power grinder. biggrin.gif










post #10472 of 13812
Quote:
Originally Posted by crazymofo View Post

Hey guys I got few questions regarding this case with watercooling...

1) I really want to fit a XSPC RX360 rad on top but with fans inside of the case too, ie fan attached to the radiator not on top of the case for aesthetics only. But from my research it seems impossible because 60mm + 25mm is to thick & might disturb the motherboard heatsink right? Am I right about this? Any way to overcome this? (note: I only can get xspc radiator brand due to its availability in my country, ordering online will be expensive for shipping fees)

2) Any problems with fitting an AX360 radiator on top? AX series is basically EX series but we are able to remove the casing right?

3) How much gap is there between the fan & motherboard after installing EX360 + corsair sp120 fans?

Do anybody have any pictures of AX radiators & sp120 in their switch 810?

first off, what motherboard? some have bigger heatsinks than others.

Next up, if the AX is the same width as the EX, there will be absolutely no issues with it

Third, once again depends on the motherboard
post #10473 of 13812
I'll post my rig biggrin.gif













Discord
(16 items)
 
  
CPUMotherboardGraphicsRAM
3570k @ 4.7 Maximus V Forumula GTX 670 FTW Corsair Vengeance 16GB (4 x 4GB) DDR3-1866 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 830 Series 256GB Solid State Drive (Boot) Seagate Barracuda ST1000DM003 1TB 7200 RPM 64MB... Seagate 500gb 5400rpm 3Gb/s (Back-Up) Lite-On iHAS424-98 
CoolingOSKeyboardPower
Corsair H100i Windows 7 Home Premium 64-bit Logitech G710+ Mechanical Backlight Gaming Keyb... Corsair AX750 
CaseMouseMouse PadAudio
NZXT Switch 810 Gunmetal Full-Tower Case Corsair M60 Steelseries Qck+ Turtle Beach Earforce x11 
  hide details  
Reply
Discord
(16 items)
 
  
CPUMotherboardGraphicsRAM
3570k @ 4.7 Maximus V Forumula GTX 670 FTW Corsair Vengeance 16GB (4 x 4GB) DDR3-1866 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 830 Series 256GB Solid State Drive (Boot) Seagate Barracuda ST1000DM003 1TB 7200 RPM 64MB... Seagate 500gb 5400rpm 3Gb/s (Back-Up) Lite-On iHAS424-98 
CoolingOSKeyboardPower
Corsair H100i Windows 7 Home Premium 64-bit Logitech G710+ Mechanical Backlight Gaming Keyb... Corsair AX750 
CaseMouseMouse PadAudio
NZXT Switch 810 Gunmetal Full-Tower Case Corsair M60 Steelseries Qck+ Turtle Beach Earforce x11 
  hide details  
Reply
post #10474 of 13812
Quote:
Originally Posted by theknappkin View Post

I'll post my rig biggrin.gif














Looks good!

Did you pain the mesh, screws and PCI slot covers? I want to do that to mine too, but don't really know what type of paint/primer to get - if I should sand them or not etc.
    
CPUMotherboardGraphicsGraphics
I7 3770K ASUS MAXIMUS V FORMULA GALAXY GTX 670 4Gb GALAXY GTX 670 4Gb 
RAMHard DriveHard DriveCooling
G.SKILL RIPJAWS X  SAMSUNG 840 250GB SSD SAMSUNG 840 500GB SSD Kuhler 620 
CoolingCoolingOSMonitor
Kuhler 620 Corsair H80 WIN 8 64 BIT Asus VG278H 120Hz 
KeyboardCaseMouseMouse Pad
Corsair Quickfire Rapid NZXT Switch 810 Logitech G400 Ratpadz 
AudioAudioAudio
Creative Soundblaster Z FiiO E12 Mont Blanc Portable Headphone Amplifier   Beyerdynamic DT 990 Pro 250 Ohm 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
I7 3770K ASUS MAXIMUS V FORMULA GALAXY GTX 670 4Gb GALAXY GTX 670 4Gb 
RAMHard DriveHard DriveCooling
G.SKILL RIPJAWS X  SAMSUNG 840 250GB SSD SAMSUNG 840 500GB SSD Kuhler 620 
CoolingCoolingOSMonitor
Kuhler 620 Corsair H80 WIN 8 64 BIT Asus VG278H 120Hz 
KeyboardCaseMouseMouse Pad
Corsair Quickfire Rapid NZXT Switch 810 Logitech G400 Ratpadz 
AudioAudioAudio
Creative Soundblaster Z FiiO E12 Mont Blanc Portable Headphone Amplifier   Beyerdynamic DT 990 Pro 250 Ohm 
  hide details  
Reply
post #10475 of 13812
Quote:
Originally Posted by crazymofo View Post

Hey guys I got few questions regarding this case with watercooling...

1) I really want to fit a XSPC RX360 rad on top but with fans inside of the case too, ie fan attached to the radiator not on top of the case for aesthetics only. But from my research it seems impossible because 60mm + 25mm is to thick & might disturb the motherboard heatsink right? Am I right about this? Any way to overcome this? (note: I only can get xspc radiator brand due to its availability in my country, ordering online will be expensive for shipping fees)

2) Any problems with fitting an AX360 radiator on top? AX series is basically EX series but we are able to remove the casing right?

3) How much gap is there between the fan & motherboard after installing EX360 + corsair sp120 fans?

Do anybody have any pictures of AX radiators & sp120 in their switch 810?

Don't have pictures of AX, but here's some of the EX420 (3x140) with Push-Pull fans:




   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
post #10476 of 13812
Quote:
Originally Posted by DirtyTrickster View Post

Looks good!

Did you pain the mesh, screws and PCI slot covers? I want to do that to mine too, but don't really know what type of paint/primer to get - if I should sand them or not etc.

I didn't sand mine, used a single coat of primer, and bought the most generic red paint i could see rolleyes.gif. I didn't exactly do it by the books and didn't put much effort into it, but got a very nice result thumb.gif

The top meshes were annoying for me to remove, because they are blocked by so many layers. Just bend the small tabs outwards and pull. Also I stuck the screws into cardboard and painted that way such that I wouldn't ruin them. Good luck painting! biggrin.gif
Discord
(16 items)
 
  
CPUMotherboardGraphicsRAM
3570k @ 4.7 Maximus V Forumula GTX 670 FTW Corsair Vengeance 16GB (4 x 4GB) DDR3-1866 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 830 Series 256GB Solid State Drive (Boot) Seagate Barracuda ST1000DM003 1TB 7200 RPM 64MB... Seagate 500gb 5400rpm 3Gb/s (Back-Up) Lite-On iHAS424-98 
CoolingOSKeyboardPower
Corsair H100i Windows 7 Home Premium 64-bit Logitech G710+ Mechanical Backlight Gaming Keyb... Corsair AX750 
CaseMouseMouse PadAudio
NZXT Switch 810 Gunmetal Full-Tower Case Corsair M60 Steelseries Qck+ Turtle Beach Earforce x11 
  hide details  
Reply
Discord
(16 items)
 
  
CPUMotherboardGraphicsRAM
3570k @ 4.7 Maximus V Forumula GTX 670 FTW Corsair Vengeance 16GB (4 x 4GB) DDR3-1866 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 830 Series 256GB Solid State Drive (Boot) Seagate Barracuda ST1000DM003 1TB 7200 RPM 64MB... Seagate 500gb 5400rpm 3Gb/s (Back-Up) Lite-On iHAS424-98 
CoolingOSKeyboardPower
Corsair H100i Windows 7 Home Premium 64-bit Logitech G710+ Mechanical Backlight Gaming Keyb... Corsair AX750 
CaseMouseMouse PadAudio
NZXT Switch 810 Gunmetal Full-Tower Case Corsair M60 Steelseries Qck+ Turtle Beach Earforce x11 
  hide details  
Reply
post #10477 of 13812
Quote:
Originally Posted by theknappkin View Post

I didn't sand mine, used a single coat of primer, and bought the most generic red paint i could see rolleyes.gif. I didn't exactly do it by the books and didn't put much effort into it, but got a very nice result thumb.gif

The top meshes were annoying for me to remove, because they are blocked by so many layers. Just bend the small tabs outwards and pull. Also I stuck the screws into cardboard and painted that way such that I wouldn't ruin them. Good luck painting! biggrin.gif

I've had a lot of success using Krylon Fusion spray paint on just about every surface, it's super simple to use.'
post #10478 of 13812
Quote:
Originally Posted by theknappkin View Post

I didn't sand mine, used a single coat of primer, and bought the most generic red paint i could see rolleyes.gif. I didn't exactly do it by the books and didn't put much effort into it, but got a very nice result thumb.gif

The top meshes were annoying for me to remove, because they are blocked by so many layers. Just bend the small tabs outwards and pull. Also I stuck the screws into cardboard and painted that way such that I wouldn't ruin them. Good luck painting! biggrin.gif
Thanks for the info.

So sanding is unnecessary. Thats wonderful news! I'd like to do the bottom mesh too.

Anyway, great looking setup man. I'm going for the same look but with the white switch. Same mobo and everything thumb.gif
    
CPUMotherboardGraphicsGraphics
I7 3770K ASUS MAXIMUS V FORMULA GALAXY GTX 670 4Gb GALAXY GTX 670 4Gb 
RAMHard DriveHard DriveCooling
G.SKILL RIPJAWS X  SAMSUNG 840 250GB SSD SAMSUNG 840 500GB SSD Kuhler 620 
CoolingCoolingOSMonitor
Kuhler 620 Corsair H80 WIN 8 64 BIT Asus VG278H 120Hz 
KeyboardCaseMouseMouse Pad
Corsair Quickfire Rapid NZXT Switch 810 Logitech G400 Ratpadz 
AudioAudioAudio
Creative Soundblaster Z FiiO E12 Mont Blanc Portable Headphone Amplifier   Beyerdynamic DT 990 Pro 250 Ohm 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
I7 3770K ASUS MAXIMUS V FORMULA GALAXY GTX 670 4Gb GALAXY GTX 670 4Gb 
RAMHard DriveHard DriveCooling
G.SKILL RIPJAWS X  SAMSUNG 840 250GB SSD SAMSUNG 840 500GB SSD Kuhler 620 
CoolingCoolingOSMonitor
Kuhler 620 Corsair H80 WIN 8 64 BIT Asus VG278H 120Hz 
KeyboardCaseMouseMouse Pad
Corsair Quickfire Rapid NZXT Switch 810 Logitech G400 Ratpadz 
AudioAudioAudio
Creative Soundblaster Z FiiO E12 Mont Blanc Portable Headphone Amplifier   Beyerdynamic DT 990 Pro 250 Ohm 
  hide details  
Reply
post #10479 of 13812
Quote:
Originally Posted by WhoKnew22 View Post

I've had a lot of success using Krylon Fusion spray paint on just about every surface, it's super simple to use.'

I can "2nd" this! Krylon Fusion is about the most versatile paint there is, period! You can get any color you want, in matte or gloss, with metallic flakes or not, etc etc. And they have clear coat, if you want some extra shine/protection, as well as a "matte coat" that provides the protection without the shine. They have high-temp paint that is strong enough to withstand engine bay (automotive) uses! They have self-etching primer, and they have primer+paint "all in one".

It is teh win!
   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
post #10480 of 13812
Quote:
Originally Posted by theknappkin View Post

I'll post my rig biggrin.gif


Is that the Lamptron FC5V2 fan controller?
How is it?
Dark Knight
(11 items)
 
  
CPUMotherboardGraphicsRAM
i5-3570K MSI MPower z77 Will be waiting for the AMD 99XX series Corsair Vengeance (4x4gb) 
Hard DriveCoolingKeyboardPower
Intel 520 180GB Venturing into Watercooling Max Keyboard Night Hawk X8 Seasonic X750 
CaseAudioAudio
Bitfenix Shinobi XL Window sound blaster z sound blaster z 
  hide details  
Reply
Dark Knight
(11 items)
 
  
CPUMotherboardGraphicsRAM
i5-3570K MSI MPower z77 Will be waiting for the AMD 99XX series Corsair Vengeance (4x4gb) 
Hard DriveCoolingKeyboardPower
Intel 520 180GB Venturing into Watercooling Max Keyboard Night Hawk X8 Seasonic X750 
CaseAudioAudio
Bitfenix Shinobi XL Window sound blaster z sound blaster z 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › Official NZXT Switch 810 thread