Overclock.net › Forums › Cooling › Water Cooling › H100 Fan Controller ( NOT batch #11359403 )
New Posts  All Forums:Forum Nav:

H100 Fan Controller ( NOT batch #11359403 )

post #1 of 12
Thread Starter 

Hey guys,

 

I've just tested my H100 with 2 fans connected to the H100 fan controller without a motherboard and CPU but via the PSU with paperclipped.

 

Now I realized the fan speed does not chance whatsoever on 3 fan profile. I've connected the 4 pin molex to the PSU and the 3 pin which goes to motherboard obviously not connected due I don't have a board yet.

 

Isn't the 3 pin header just a RPM reading? I doubt it control the fan speed because the CPU unit fan controller suppose to control the fan voltage no?

 

H100 pumps work and the fan spins at max speed, there is no way I can slow it down.

 

My H100 isn't the under the recall list at all ( batch #11359403 ).

 

 

My H100 batch number is: #11479403

 
≡ Snowbaru ≡
(17 items)
 
 
CPUMotherboardGraphicsGraphics
Core i7 3930K 4.9Ghz Asus Sabertooth X79 EVGA GTX TITAN 1250Mhz KPE/Hybrid BIOS (SOLD) NVIDIA Geforce GTX 1080 Ti Founder Edition 
RAMHard DriveHard DriveHard Drive
32GB Samsung 30nm 2400Mhz OCZ Vertex 4 Samsung 850 EVO 13000GB HDDs 
CoolingOSMonitorKeyboard
EKWB Custom Watercooling, XSPC, Bitpower, Primo... Windows 10 Pro x64 (1607) ASUS PG278Q G-SYNC (2560x1440) Logitech G910 Onion Spark 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 850G2 Gold Fractal Design Define S Logitech G502 Logitech G440 
AudioOtherOtherOther
Logitech G933 Xbox One Controller Asus RT-AC68U Hitron CDA3 
CPUCPUMotherboardGraphics
5HP 5HP 5HP 5HP 
RAMHard DriveOptical DriveCooling
5HP 5HP 5HP 5HP 
OSMonitorKeyboardPower
5HP 5HP 5HP 5HP 
CaseMouseMouse PadAudio
5HP 5HP 5HP 5HP 
Other
5HP 
  hide details  
Reply
 
≡ Snowbaru ≡
(17 items)
 
 
CPUMotherboardGraphicsGraphics
Core i7 3930K 4.9Ghz Asus Sabertooth X79 EVGA GTX TITAN 1250Mhz KPE/Hybrid BIOS (SOLD) NVIDIA Geforce GTX 1080 Ti Founder Edition 
RAMHard DriveHard DriveHard Drive
32GB Samsung 30nm 2400Mhz OCZ Vertex 4 Samsung 850 EVO 13000GB HDDs 
CoolingOSMonitorKeyboard
EKWB Custom Watercooling, XSPC, Bitpower, Primo... Windows 10 Pro x64 (1607) ASUS PG278Q G-SYNC (2560x1440) Logitech G910 Onion Spark 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 850G2 Gold Fractal Design Define S Logitech G502 Logitech G440 
AudioOtherOtherOther
Logitech G933 Xbox One Controller Asus RT-AC68U Hitron CDA3 
CPUCPUMotherboardGraphics
5HP 5HP 5HP 5HP 
RAMHard DriveOptical DriveCooling
5HP 5HP 5HP 5HP 
OSMonitorKeyboardPower
5HP 5HP 5HP 5HP 
CaseMouseMouse PadAudio
5HP 5HP 5HP 5HP 
Other
5HP 
  hide details  
Reply
post #2 of 12
If I'm not mistaken, the fan controller on the H100/H80 is not an immediate change but the maximum speed the fans can reach under load. I'd try to stress the CPU and see if the fan speed changes.
My Gaming Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 2500K @ 4,5GHz - 1.296 volts MSI P67A-GD55 Asus Strix Geforce GTX 970 4GB Mushkin Enhanced Silverline Stiletto 2x4GB 1333... 
Hard DriveHard DriveHard DriveHard Drive
Seagate Barracuda 7200.12 1TB Seagate Barracuda 7200.12 500GB Toshiba HDKPC08 3TB Samsung 840 Evo 120GB 
CoolingOSMonitorKeyboard
Corsair Hydro Series H60 Windows 8.1 Professional x64 BenQ G2420HD 24" 1920x1080 IBM Model M2 French Canadian Layout '93 
PowerCaseMouseMouse Pad
Mushkin Enhanced Joule 1000W Modular Antec DF-35 (Modded) Razer Deathadder 3500 DPI Mionix Sargas 900 
  hide details  
Reply
My Gaming Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 2500K @ 4,5GHz - 1.296 volts MSI P67A-GD55 Asus Strix Geforce GTX 970 4GB Mushkin Enhanced Silverline Stiletto 2x4GB 1333... 
Hard DriveHard DriveHard DriveHard Drive
Seagate Barracuda 7200.12 1TB Seagate Barracuda 7200.12 500GB Toshiba HDKPC08 3TB Samsung 840 Evo 120GB 
CoolingOSMonitorKeyboard
Corsair Hydro Series H60 Windows 8.1 Professional x64 BenQ G2420HD 24" 1920x1080 IBM Model M2 French Canadian Layout '93 
PowerCaseMouseMouse Pad
Mushkin Enhanced Joule 1000W Modular Antec DF-35 (Modded) Razer Deathadder 3500 DPI Mionix Sargas 900 
  hide details  
Reply
post #3 of 12
Thread Starter 

I've connected 4 fans. The last connector fan won't spin. 4/4 fans runs at powerup and after a while the last fan stop spinning and 3 other continue to spin.

 
≡ Snowbaru ≡
(17 items)
 
 
CPUMotherboardGraphicsGraphics
Core i7 3930K 4.9Ghz Asus Sabertooth X79 EVGA GTX TITAN 1250Mhz KPE/Hybrid BIOS (SOLD) NVIDIA Geforce GTX 1080 Ti Founder Edition 
RAMHard DriveHard DriveHard Drive
32GB Samsung 30nm 2400Mhz OCZ Vertex 4 Samsung 850 EVO 13000GB HDDs 
CoolingOSMonitorKeyboard
EKWB Custom Watercooling, XSPC, Bitpower, Primo... Windows 10 Pro x64 (1607) ASUS PG278Q G-SYNC (2560x1440) Logitech G910 Onion Spark 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 850G2 Gold Fractal Design Define S Logitech G502 Logitech G440 
AudioOtherOtherOther
Logitech G933 Xbox One Controller Asus RT-AC68U Hitron CDA3 
CPUCPUMotherboardGraphics
5HP 5HP 5HP 5HP 
RAMHard DriveOptical DriveCooling
5HP 5HP 5HP 5HP 
OSMonitorKeyboardPower
5HP 5HP 5HP 5HP 
CaseMouseMouse PadAudio
5HP 5HP 5HP 5HP 
Other
5HP 
  hide details  
Reply
 
≡ Snowbaru ≡
(17 items)
 
 
CPUMotherboardGraphicsGraphics
Core i7 3930K 4.9Ghz Asus Sabertooth X79 EVGA GTX TITAN 1250Mhz KPE/Hybrid BIOS (SOLD) NVIDIA Geforce GTX 1080 Ti Founder Edition 
RAMHard DriveHard DriveHard Drive
32GB Samsung 30nm 2400Mhz OCZ Vertex 4 Samsung 850 EVO 13000GB HDDs 
CoolingOSMonitorKeyboard
EKWB Custom Watercooling, XSPC, Bitpower, Primo... Windows 10 Pro x64 (1607) ASUS PG278Q G-SYNC (2560x1440) Logitech G910 Onion Spark 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 850G2 Gold Fractal Design Define S Logitech G502 Logitech G440 
AudioOtherOtherOther
Logitech G933 Xbox One Controller Asus RT-AC68U Hitron CDA3 
CPUCPUMotherboardGraphics
5HP 5HP 5HP 5HP 
RAMHard DriveOptical DriveCooling
5HP 5HP 5HP 5HP 
OSMonitorKeyboardPower
5HP 5HP 5HP 5HP 
CaseMouseMouse PadAudio
5HP 5HP 5HP 5HP 
Other
5HP 
  hide details  
Reply
post #4 of 12
Thread Starter 

Bummer... I've just reset the firmware fan controller. All works now. It looks like the GT AP15 ignores the fan controller due to 1850 RPM. 900-1300 is pretty much the min the controller can push so I probably never notices the 500RPM differences.

 

Either way, should I stick with the stock corsair fans or just put on GT AP15 which is kinda running near 1300-1850RPM most of the time regardless of the controller.

 
≡ Snowbaru ≡
(17 items)
 
 
CPUMotherboardGraphicsGraphics
Core i7 3930K 4.9Ghz Asus Sabertooth X79 EVGA GTX TITAN 1250Mhz KPE/Hybrid BIOS (SOLD) NVIDIA Geforce GTX 1080 Ti Founder Edition 
RAMHard DriveHard DriveHard Drive
32GB Samsung 30nm 2400Mhz OCZ Vertex 4 Samsung 850 EVO 13000GB HDDs 
CoolingOSMonitorKeyboard
EKWB Custom Watercooling, XSPC, Bitpower, Primo... Windows 10 Pro x64 (1607) ASUS PG278Q G-SYNC (2560x1440) Logitech G910 Onion Spark 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 850G2 Gold Fractal Design Define S Logitech G502 Logitech G440 
AudioOtherOtherOther
Logitech G933 Xbox One Controller Asus RT-AC68U Hitron CDA3 
CPUCPUMotherboardGraphics
5HP 5HP 5HP 5HP 
RAMHard DriveOptical DriveCooling
5HP 5HP 5HP 5HP 
OSMonitorKeyboardPower
5HP 5HP 5HP 5HP 
CaseMouseMouse PadAudio
5HP 5HP 5HP 5HP 
Other
5HP 
  hide details  
Reply
 
≡ Snowbaru ≡
(17 items)
 
 
CPUMotherboardGraphicsGraphics
Core i7 3930K 4.9Ghz Asus Sabertooth X79 EVGA GTX TITAN 1250Mhz KPE/Hybrid BIOS (SOLD) NVIDIA Geforce GTX 1080 Ti Founder Edition 
RAMHard DriveHard DriveHard Drive
32GB Samsung 30nm 2400Mhz OCZ Vertex 4 Samsung 850 EVO 13000GB HDDs 
CoolingOSMonitorKeyboard
EKWB Custom Watercooling, XSPC, Bitpower, Primo... Windows 10 Pro x64 (1607) ASUS PG278Q G-SYNC (2560x1440) Logitech G910 Onion Spark 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 850G2 Gold Fractal Design Define S Logitech G502 Logitech G440 
AudioOtherOtherOther
Logitech G933 Xbox One Controller Asus RT-AC68U Hitron CDA3 
CPUCPUMotherboardGraphics
5HP 5HP 5HP 5HP 
RAMHard DriveOptical DriveCooling
5HP 5HP 5HP 5HP 
OSMonitorKeyboardPower
5HP 5HP 5HP 5HP 
CaseMouseMouse PadAudio
5HP 5HP 5HP 5HP 
Other
5HP 
  hide details  
Reply
post #5 of 12
The fan control on the H80/100 is weird... i ended up not using it but instead using my fan controller.
When you set the speed on the H80 it doesn't immediately do anything.... I think it actually uses a temp sensor in the block to change speeds, but i'm not totally sure. As i stressed my CPU the fans sped up, so i assume there is some sensor in the block.
    
CPUMotherboardGraphicsRAM
Core i7 5930k MSI X99S SLI GTX 1080 32GB Crucial DDR4 
Hard DriveHard DriveCoolingCooling
(3x) Crucial 256GB (768gb RAID0) WD 3TB EK Supremacy EVO + D5 Vario GT-AP15 
CoolingMonitorMonitorKeyboard
2X HWLABS GTX360 (2x) 1440p QHD PLS MicroBoard 40" 4k MVA Corsair K70 RGB 
PowerCaseMouseAudio
Corsair RM1000 Custom Build Logitech G900 Yamaha RX-V465 + 5.1 Surround 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 5930k MSI X99S SLI GTX 1080 32GB Crucial DDR4 
Hard DriveHard DriveCoolingCooling
(3x) Crucial 256GB (768gb RAID0) WD 3TB EK Supremacy EVO + D5 Vario GT-AP15 
CoolingMonitorMonitorKeyboard
2X HWLABS GTX360 (2x) 1440p QHD PLS MicroBoard 40" 4k MVA Corsair K70 RGB 
PowerCaseMouseAudio
Corsair RM1000 Custom Build Logitech G900 Yamaha RX-V465 + 5.1 Surround 
  hide details  
Reply
post #6 of 12
Thread Starter 
Quote:
Originally Posted by iCrap View Post

The fan control on the H80/100 is weird... i ended up not using it but instead using my fan controller.
When you set the speed on the H80 it doesn't immediately do anything.... I think it actually uses a temp sensor in the block to change speeds, but i'm not totally sure. As i stressed my CPU the fans sped up, so i assume there is some sensor in the block.


From what I understand is the profile has a range from Quiet, Perf and Turbo.

 

http://www.corsair.com/blog/understanding-the-hydro-series-h80-and-h100-cooling-performance-profiles/

 

Fan_profiles.png

 

 
≡ Snowbaru ≡
(17 items)
 
 
CPUMotherboardGraphicsGraphics
Core i7 3930K 4.9Ghz Asus Sabertooth X79 EVGA GTX TITAN 1250Mhz KPE/Hybrid BIOS (SOLD) NVIDIA Geforce GTX 1080 Ti Founder Edition 
RAMHard DriveHard DriveHard Drive
32GB Samsung 30nm 2400Mhz OCZ Vertex 4 Samsung 850 EVO 13000GB HDDs 
CoolingOSMonitorKeyboard
EKWB Custom Watercooling, XSPC, Bitpower, Primo... Windows 10 Pro x64 (1607) ASUS PG278Q G-SYNC (2560x1440) Logitech G910 Onion Spark 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 850G2 Gold Fractal Design Define S Logitech G502 Logitech G440 
AudioOtherOtherOther
Logitech G933 Xbox One Controller Asus RT-AC68U Hitron CDA3 
CPUCPUMotherboardGraphics
5HP 5HP 5HP 5HP 
RAMHard DriveOptical DriveCooling
5HP 5HP 5HP 5HP 
OSMonitorKeyboardPower
5HP 5HP 5HP 5HP 
CaseMouseMouse PadAudio
5HP 5HP 5HP 5HP 
Other
5HP 
  hide details  
Reply
 
≡ Snowbaru ≡
(17 items)
 
 
CPUMotherboardGraphicsGraphics
Core i7 3930K 4.9Ghz Asus Sabertooth X79 EVGA GTX TITAN 1250Mhz KPE/Hybrid BIOS (SOLD) NVIDIA Geforce GTX 1080 Ti Founder Edition 
RAMHard DriveHard DriveHard Drive
32GB Samsung 30nm 2400Mhz OCZ Vertex 4 Samsung 850 EVO 13000GB HDDs 
CoolingOSMonitorKeyboard
EKWB Custom Watercooling, XSPC, Bitpower, Primo... Windows 10 Pro x64 (1607) ASUS PG278Q G-SYNC (2560x1440) Logitech G910 Onion Spark 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 850G2 Gold Fractal Design Define S Logitech G502 Logitech G440 
AudioOtherOtherOther
Logitech G933 Xbox One Controller Asus RT-AC68U Hitron CDA3 
CPUCPUMotherboardGraphics
5HP 5HP 5HP 5HP 
RAMHard DriveOptical DriveCooling
5HP 5HP 5HP 5HP 
OSMonitorKeyboardPower
5HP 5HP 5HP 5HP 
CaseMouseMouse PadAudio
5HP 5HP 5HP 5HP 
Other
5HP 
  hide details  
Reply
post #7 of 12
Do the 3 settings on the H100 do anything other than change fan speed?
I've removed the fans on the block (had some issues) from the controller and stuck'em with the 600T fan controller.

I was wondering if the liquid flow in/out of the block is dependent on the three controller setting?
post #8 of 12
Thread Starter 
Quote:
Originally Posted by damooli View Post

Do the 3 settings on the H100 do anything other than change fan speed?
I've removed the fans on the block (had some issues) from the controller and stuck'em with the 600T fan controller.

I was wondering if the liquid flow in/out of the block is dependent on the three controller setting?

 


No, the CPU block always run at max.

 
≡ Snowbaru ≡
(17 items)
 
 
CPUMotherboardGraphicsGraphics
Core i7 3930K 4.9Ghz Asus Sabertooth X79 EVGA GTX TITAN 1250Mhz KPE/Hybrid BIOS (SOLD) NVIDIA Geforce GTX 1080 Ti Founder Edition 
RAMHard DriveHard DriveHard Drive
32GB Samsung 30nm 2400Mhz OCZ Vertex 4 Samsung 850 EVO 13000GB HDDs 
CoolingOSMonitorKeyboard
EKWB Custom Watercooling, XSPC, Bitpower, Primo... Windows 10 Pro x64 (1607) ASUS PG278Q G-SYNC (2560x1440) Logitech G910 Onion Spark 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 850G2 Gold Fractal Design Define S Logitech G502 Logitech G440 
AudioOtherOtherOther
Logitech G933 Xbox One Controller Asus RT-AC68U Hitron CDA3 
CPUCPUMotherboardGraphics
5HP 5HP 5HP 5HP 
RAMHard DriveOptical DriveCooling
5HP 5HP 5HP 5HP 
OSMonitorKeyboardPower
5HP 5HP 5HP 5HP 
CaseMouseMouse PadAudio
5HP 5HP 5HP 5HP 
Other
5HP 
  hide details  
Reply
 
≡ Snowbaru ≡
(17 items)
 
 
CPUMotherboardGraphicsGraphics
Core i7 3930K 4.9Ghz Asus Sabertooth X79 EVGA GTX TITAN 1250Mhz KPE/Hybrid BIOS (SOLD) NVIDIA Geforce GTX 1080 Ti Founder Edition 
RAMHard DriveHard DriveHard Drive
32GB Samsung 30nm 2400Mhz OCZ Vertex 4 Samsung 850 EVO 13000GB HDDs 
CoolingOSMonitorKeyboard
EKWB Custom Watercooling, XSPC, Bitpower, Primo... Windows 10 Pro x64 (1607) ASUS PG278Q G-SYNC (2560x1440) Logitech G910 Onion Spark 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 850G2 Gold Fractal Design Define S Logitech G502 Logitech G440 
AudioOtherOtherOther
Logitech G933 Xbox One Controller Asus RT-AC68U Hitron CDA3 
CPUCPUMotherboardGraphics
5HP 5HP 5HP 5HP 
RAMHard DriveOptical DriveCooling
5HP 5HP 5HP 5HP 
OSMonitorKeyboardPower
5HP 5HP 5HP 5HP 
CaseMouseMouse PadAudio
5HP 5HP 5HP 5HP 
Other
5HP 
  hide details  
Reply
post #9 of 12
awesome ... thanks
post #10 of 12
On this same note, I have a slight problem as well.

Just got the H100, installed it with the 2 fans that came with it plugged into the fan controller.

Case: Antec 1200
Mobo: Asus P6Tdeluxe

What I understand from the above posts, clicking the profile button isn't supposed to change the fan speeds at all but only change max RPMs during load?

i7 920 @ stock
My idle temps seem a bit high at 38/39/40/35C. Using a push/pull configuration with the case fans on the antec 1200.

I feel as though nothing happens when I click the profile button =/
 
Lester the Tester
(12 items)
 
 
CPUMotherboardGraphicsRAM
i7 3770k @4.4ghz - 1.18v Maximus V Formula EVGA GTX 1080 FTW Crucial Ballistix 2x8gb 
Hard DriveOptical DriveCoolingOS
Crucial 256gb SSD + RAID 5 3x2TB plextor DVD/CD+/-RW Corsair H100 W10 Pro - 64Bit 
MonitorKeyboardPowerCase
LG 34UM69-G G15 AX850 Thermaltake P5 
MouseAudioOther
Logitech G5 Max V Formula Gentle Typhoon AP-45 x7 
CPUMotherboardGraphicsRAM
e7400 @3.8ghz (Air) asus p5q se EVGA GTX 280 G.Skill HyperX 
Hard DriveCoolingOSMonitor
Seagate  hyper212 evo W7 Ultimate-64Bit Samsung PX2370 
KeyboardPowerCaseMouse
k800 CM 550W Random thermaltake G5 
  hide details  
Reply
 
Lester the Tester
(12 items)
 
 
CPUMotherboardGraphicsRAM
i7 3770k @4.4ghz - 1.18v Maximus V Formula EVGA GTX 1080 FTW Crucial Ballistix 2x8gb 
Hard DriveOptical DriveCoolingOS
Crucial 256gb SSD + RAID 5 3x2TB plextor DVD/CD+/-RW Corsair H100 W10 Pro - 64Bit 
MonitorKeyboardPowerCase
LG 34UM69-G G15 AX850 Thermaltake P5 
MouseAudioOther
Logitech G5 Max V Formula Gentle Typhoon AP-45 x7 
CPUMotherboardGraphicsRAM
e7400 @3.8ghz (Air) asus p5q se EVGA GTX 280 G.Skill HyperX 
Hard DriveCoolingOSMonitor
Seagate  hyper212 evo W7 Ultimate-64Bit Samsung PX2370 
KeyboardPowerCaseMouse
k800 CM 550W Random thermaltake G5 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › H100 Fan Controller ( NOT batch #11359403 )