Overclock.net › Forums › AMD › AMD CPUs › [OFFICIAL] AMD Phenom II x4 Deneb CPU Owner's Club
New Posts  All Forums:Forum Nav:

[OFFICIAL] AMD Phenom II x4 Deneb CPU Owner's Club - Page 49

post #481 of 1264
Here's stock cpu-nb and cpu:


Here's my 24/7 oc. 4ghz and 2.6ghz cpu-nb:


So yes there is a difference.

And a suicide run obviously not stable:
DeskoSaurus X
(22 items)
 
It Does Stuff
(24 items)
 
 
CPUMotherboardGraphicsRAM
4790K 4.7 GHz Z97 MPOWER MAX AC 290X Lightning G. Skill TridentX 2x8GB 10-12-12 
Hard DriveHard DriveCoolingCooling
2x Crucial MX100 + 960GB M500 2x WD Blue RAID EK Supremacy EK-FC R9-290X Lightning 
CoolingCoolingCoolingOS
EK XE 480 + EK CoolStream PE 480 10x Phanteks + 2x Cougar Vortex MCP50X + MCP50X Windows 10 Pro 
MonitorKeyboardPowerCase
ViewSonic VX2250 22" LED Generic HP Corsair AX860i Lian-Li DK-Q2X 
MouseMouse PadAudioOther
Logitech G700 XTRAC Ripper TC Electronic Impact Twin Corsair Commander Mini 
OtherOther
Schiit Vali Kanto Yumi (Bamboo) 
CPUMotherboardGraphicsRAM
FX-8350 4.95GHz 24/7 GA-990FXA-UD3 Sapphire 7870 XT  Mushkin Redline 997051 @1866 8-8-8-24 1T 
RAMHard DriveHard DriveCooling
Crucial Ballistix Tactical Tracer @1866 8-8-8-2... Black WD6401AALS 2x WD10EZEX Raid-0 EK Supremacy 
CoolingCoolingCoolingCooling
10x Cougar Vortex PWM 3x Helix EK VGA Supremacy Acetal Alphacool NexXxos ST30 240mm, 2x XT45 240mm XSPC X2O 750 
CoolingOSMonitorKeyboard
Jingway DP-600 pump Windows 8.1 Pro x64 ViewSonic VX2250 22" LED Generic HP 
PowerCaseMouseAudio
Rosewill HIVE-650 CM 690 II Advanced B&W  Logitech G700 Xonar DG 
AudioOtherOther
Tc Electronic Impact Twin Fan Controller: Aerocool X-Vision 2x Swiftech PWM Splitter 
  hide details  
Reply
DeskoSaurus X
(22 items)
 
It Does Stuff
(24 items)
 
 
CPUMotherboardGraphicsRAM
4790K 4.7 GHz Z97 MPOWER MAX AC 290X Lightning G. Skill TridentX 2x8GB 10-12-12 
Hard DriveHard DriveCoolingCooling
2x Crucial MX100 + 960GB M500 2x WD Blue RAID EK Supremacy EK-FC R9-290X Lightning 
CoolingCoolingCoolingOS
EK XE 480 + EK CoolStream PE 480 10x Phanteks + 2x Cougar Vortex MCP50X + MCP50X Windows 10 Pro 
MonitorKeyboardPowerCase
ViewSonic VX2250 22" LED Generic HP Corsair AX860i Lian-Li DK-Q2X 
MouseMouse PadAudioOther
Logitech G700 XTRAC Ripper TC Electronic Impact Twin Corsair Commander Mini 
OtherOther
Schiit Vali Kanto Yumi (Bamboo) 
CPUMotherboardGraphicsRAM
FX-8350 4.95GHz 24/7 GA-990FXA-UD3 Sapphire 7870 XT  Mushkin Redline 997051 @1866 8-8-8-24 1T 
RAMHard DriveHard DriveCooling
Crucial Ballistix Tactical Tracer @1866 8-8-8-2... Black WD6401AALS 2x WD10EZEX Raid-0 EK Supremacy 
CoolingCoolingCoolingCooling
10x Cougar Vortex PWM 3x Helix EK VGA Supremacy Acetal Alphacool NexXxos ST30 240mm, 2x XT45 240mm XSPC X2O 750 
CoolingOSMonitorKeyboard
Jingway DP-600 pump Windows 8.1 Pro x64 ViewSonic VX2250 22" LED Generic HP 
PowerCaseMouseAudio
Rosewill HIVE-650 CM 690 II Advanced B&W  Logitech G700 Xonar DG 
AudioOtherOther
Tc Electronic Impact Twin Fan Controller: Aerocool X-Vision 2x Swiftech PWM Splitter 
  hide details  
Reply
post #482 of 1264
Hello everyone. I would like to OC my Phenom II X4 945 BE, but I have no experience in OCing so I need clear instructions how to do it correctly.

Here is my specs:
CPU: Phenom II X4 945
Cooler: True spirit 120
RAM: 2x4GB 1333Hz
Mobo: Asus M5A97


Basically I have no idea what I should do first, I only know that I need to go to BIOS and change some settings there, test stability and temps etc. If someone could do me a step by step guide I would be very grateful.

Also, here is my CPU-Z: 2561021.png
Edited by takeforlife - 10/29/12 at 10:10am
post #483 of 1264
Quote:
Originally Posted by M3TAl View Post

Here's stock cpu-nb and cpu:

Here's my 24/7 oc. 4ghz and 2.6ghz cpu-nb:

So yes there is a difference.
And a suicide run obviously not stable:

I'm actually a bit shocked at your readings with timings that tight. Nice OC though, my C2 will never make 4 GHz, even on liquid. Stupid thing won't accept any voltage changes (Hence me having to find a way to run 3.85 on STOCK)
post #484 of 1264
207MHZ CPU NB X12 1.25V 3.83GHZ 1.42V 1656MHZ RAM 1,65V ( three ram dimms )






CAn anyone do the benchmarks with the same settings;
Edited by astrovasilis - 10/29/12 at 6:30am
post #485 of 1264

I'm not doing so bad! smile.gif
The Phenom Reborn
(19 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X4 B50 @ 3.6 Ghz @ 1.4V Asus Sabertooth GTX560 SE @ 945/2025Mhz @ 1.38V 2 x 4 GB Mushkin Enhanced Blackline @ 1600Mhz @... 
Hard DriveHard DriveHard DriveHard Drive
Western Digital Caviar Black Western Digital Blue Western Digital Blue Crucial M4 128GB SSD 
Optical DriveCoolingOSMonitor
LG GH22NS50 Black SATA DVD Xigmatek S-1283 w/ Noctua 120mm Fan Windows 7 Ultimate x64bit Samsung 931cw 19'' + Emerson 32" HDTV 
KeyboardPowerCaseMouse
Razer Arctosa Corsair HX650W Corsair 600T Limited White Edition Mionix Naos 5000 
Mouse PadAudioAudio
Steelseries Small Gaming Pad Altec Lansing VS4621 + Sennheiser HD448 ASUS Xonar Audio Card 
  hide details  
Reply
The Phenom Reborn
(19 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X4 B50 @ 3.6 Ghz @ 1.4V Asus Sabertooth GTX560 SE @ 945/2025Mhz @ 1.38V 2 x 4 GB Mushkin Enhanced Blackline @ 1600Mhz @... 
Hard DriveHard DriveHard DriveHard Drive
Western Digital Caviar Black Western Digital Blue Western Digital Blue Crucial M4 128GB SSD 
Optical DriveCoolingOSMonitor
LG GH22NS50 Black SATA DVD Xigmatek S-1283 w/ Noctua 120mm Fan Windows 7 Ultimate x64bit Samsung 931cw 19'' + Emerson 32" HDTV 
KeyboardPowerCaseMouse
Razer Arctosa Corsair HX650W Corsair 600T Limited White Edition Mionix Naos 5000 
Mouse PadAudioAudio
Steelseries Small Gaming Pad Altec Lansing VS4621 + Sennheiser HD448 ASUS Xonar Audio Card 
  hide details  
Reply
post #486 of 1264
Quote:
Originally Posted by Anonaru View Post

I'm actually a bit shocked at your readings with timings that tight. Nice OC though, my C2 will never make 4 GHz, even on liquid. Stupid thing won't accept any voltage changes (Hence me having to find a way to run 3.85 on STOCK)

+1 He has a nice OC, but the Maxxmem results are a bit off? I could crack around 9.10 Gb/s with my CPU at 3.5Ghz and NB at 2.7Ghz, with DDR2! Obviously not completely stable, though...
 
13" beast
(6 items)
 
HTPC
(8 items)
 
CPUMotherboardGraphicsRAM
Lapped X4 940BE @ 3.5Ghz / NB @ 2.4GHz Biostar TA790GX 128M 1GB HD6950 @ 965/1360 (1.26V) Kingston Hyper-X 2GB x 4, 1066 MHz 5-5-5-15-22 ... 
Hard DriveOptical DriveCoolingOS
Crucial M4 64GB SSD, WD 640GB x 2 none Scythe Katana 3 Win7 64bit 
MonitorKeyboardPowerCase
Dell 24", Samsung 17" x 2 Logitech Illuminated Antec Earthwatts 750W Antec 300 
CPUGraphicsRAMHard Drive
Intel Core i5 2410M @ 2.3 Ghz stock Intel HD Graphics 3000 4GB 500 GB 
OSMonitor
Windows 7 WXGA (1366x768) 
CPUMotherboardGraphicsRAM
Athlon II X2 245 GA-MA785GM-UD2H Onboard HD4200 Kingston 2GB 
Hard DriveOSKeyboardCase
WD 2TB x 2 Windows 7 Ultimate Benq Wireless Antec NSK1480B 
  hide details  
Reply
 
13" beast
(6 items)
 
HTPC
(8 items)
 
CPUMotherboardGraphicsRAM
Lapped X4 940BE @ 3.5Ghz / NB @ 2.4GHz Biostar TA790GX 128M 1GB HD6950 @ 965/1360 (1.26V) Kingston Hyper-X 2GB x 4, 1066 MHz 5-5-5-15-22 ... 
Hard DriveOptical DriveCoolingOS
Crucial M4 64GB SSD, WD 640GB x 2 none Scythe Katana 3 Win7 64bit 
MonitorKeyboardPowerCase
Dell 24", Samsung 17" x 2 Logitech Illuminated Antec Earthwatts 750W Antec 300 
CPUGraphicsRAMHard Drive
Intel Core i5 2410M @ 2.3 Ghz stock Intel HD Graphics 3000 4GB 500 GB 
OSMonitor
Windows 7 WXGA (1366x768) 
CPUMotherboardGraphicsRAM
Athlon II X2 245 GA-MA785GM-UD2H Onboard HD4200 Kingston 2GB 
Hard DriveOSKeyboardCase
WD 2TB x 2 Windows 7 Ultimate Benq Wireless Antec NSK1480B 
  hide details  
Reply
post #487 of 1264
Quote:
Originally Posted by takeforlife View Post

Hello everyone. I would like to OC my Phenom II X4 945 BE, but I have no experience in OCing so I need clear instructions how to do it correctly.
Here is my specs:
CPU: Phenom II X4 945BE
Cooler: True spirit 120
RAM: 2x4GB 1333Hz
Mobo: Asus M5A97
Basically I have no idea what I should do first, I only know that I need to go to BIOS and change some settings there, test stability and temps etc. If someone could do me a step by step guide I would be very grateful.
Also, here is my CPU-Z: 2561021.png

Read some beginner OC guides around here. Wasn't aware that 945 came in Black Edition - if it does, you are lucky, up the multiplier and away you go. I notice you still have coolnquiet enabled because your CPUz validation has downclocked to 800 Mhz. Might want to turn that off in BIOS before starting out.

Basically:

First up, what CPU cooler do you have? This may limit your OC potential
Set all settings to stock speeds/volts
Up the multi one or two notches at a time and test with Prime 95 for stability for 10-20 minutes at this stage. If it craps out, increase CPU volts or RAM volts depending on the BSOD error.
Fine-tune the RAM speeds/timing and volts. Rinse and repeat, after painstaking efforts, test with Prime 95 and memtest86 for several hours to ensure stability
Edited by mongen - 10/29/12 at 8:47am
 
13" beast
(6 items)
 
HTPC
(8 items)
 
CPUMotherboardGraphicsRAM
Lapped X4 940BE @ 3.5Ghz / NB @ 2.4GHz Biostar TA790GX 128M 1GB HD6950 @ 965/1360 (1.26V) Kingston Hyper-X 2GB x 4, 1066 MHz 5-5-5-15-22 ... 
Hard DriveOptical DriveCoolingOS
Crucial M4 64GB SSD, WD 640GB x 2 none Scythe Katana 3 Win7 64bit 
MonitorKeyboardPowerCase
Dell 24", Samsung 17" x 2 Logitech Illuminated Antec Earthwatts 750W Antec 300 
CPUGraphicsRAMHard Drive
Intel Core i5 2410M @ 2.3 Ghz stock Intel HD Graphics 3000 4GB 500 GB 
OSMonitor
Windows 7 WXGA (1366x768) 
CPUMotherboardGraphicsRAM
Athlon II X2 245 GA-MA785GM-UD2H Onboard HD4200 Kingston 2GB 
Hard DriveOSKeyboardCase
WD 2TB x 2 Windows 7 Ultimate Benq Wireless Antec NSK1480B 
  hide details  
Reply
 
13" beast
(6 items)
 
HTPC
(8 items)
 
CPUMotherboardGraphicsRAM
Lapped X4 940BE @ 3.5Ghz / NB @ 2.4GHz Biostar TA790GX 128M 1GB HD6950 @ 965/1360 (1.26V) Kingston Hyper-X 2GB x 4, 1066 MHz 5-5-5-15-22 ... 
Hard DriveOptical DriveCoolingOS
Crucial M4 64GB SSD, WD 640GB x 2 none Scythe Katana 3 Win7 64bit 
MonitorKeyboardPowerCase
Dell 24", Samsung 17" x 2 Logitech Illuminated Antec Earthwatts 750W Antec 300 
CPUGraphicsRAMHard Drive
Intel Core i5 2410M @ 2.3 Ghz stock Intel HD Graphics 3000 4GB 500 GB 
OSMonitor
Windows 7 WXGA (1366x768) 
CPUMotherboardGraphicsRAM
Athlon II X2 245 GA-MA785GM-UD2H Onboard HD4200 Kingston 2GB 
Hard DriveOSKeyboardCase
WD 2TB x 2 Windows 7 Ultimate Benq Wireless Antec NSK1480B 
  hide details  
Reply
post #488 of 1264
Quote:
Originally Posted by mongen View Post

Read some beginner OC guides around here. Wasn't aware that 945 came in Black Edition - if it does, you are lucky, up the multiplier and away you go. I notice you still have coolnquiet enabled because your CPUz validation has downclocked to 800 Mhz. Might want to turn that off in BIOS before starting out.
Basically:
First up, what CPU cooler do you have? This may limit your OC potential
Set all settings to stock speeds/volts
Up the multi one or two notches at a time and test with Prime 95 for stability for 10-20 minutes at this stage. If it craps out, increase CPU volts or RAM volts depending on the BSOD error.
Fine-tune the RAM speeds/timing and volts. Rinse and repeat, after painstaking efforts, test with Prime 95 and memtest86 for several hours to ensure stability

I read the guide here: http://www.overclockers.com/forums/showthread.php?t=596023&highlight=overclock+amd

I understood most of the things there but might need more simple instructions. My cooler is, as stated in the first post, Thermalright True Spirit 120 and I checked my CPU and it wasn't black edition, my mistake biggrin.gif Cool'n quiet is indeed enabled so i'll just disable it when I'm ready to OC.
post #489 of 1264
Quote:
Originally Posted by mongen View Post

+1 He has a nice OC, but the Maxxmem results are a bit off? I could crack around 9.10 Gb/s with my CPU at 3.5Ghz and NB at 2.7Ghz, with DDR2! Obviously not completely stable, though...

For reference here's my old mATX board and DDR2 with my 24/7 OC.


Maybe my chip just not so great? Or degradation? My friend has same exact board and memory (970A-UD3 + 8gb Mushkin Redline 997051) but an Athlon II x4. He scores just a little bit higher in maxxmem then my x4 955 with same settings.
DeskoSaurus X
(22 items)
 
It Does Stuff
(24 items)
 
 
CPUMotherboardGraphicsRAM
4790K 4.7 GHz Z97 MPOWER MAX AC 290X Lightning G. Skill TridentX 2x8GB 10-12-12 
Hard DriveHard DriveCoolingCooling
2x Crucial MX100 + 960GB M500 2x WD Blue RAID EK Supremacy EK-FC R9-290X Lightning 
CoolingCoolingCoolingOS
EK XE 480 + EK CoolStream PE 480 10x Phanteks + 2x Cougar Vortex MCP50X + MCP50X Windows 10 Pro 
MonitorKeyboardPowerCase
ViewSonic VX2250 22" LED Generic HP Corsair AX860i Lian-Li DK-Q2X 
MouseMouse PadAudioOther
Logitech G700 XTRAC Ripper TC Electronic Impact Twin Corsair Commander Mini 
OtherOther
Schiit Vali Kanto Yumi (Bamboo) 
CPUMotherboardGraphicsRAM
FX-8350 4.95GHz 24/7 GA-990FXA-UD3 Sapphire 7870 XT  Mushkin Redline 997051 @1866 8-8-8-24 1T 
RAMHard DriveHard DriveCooling
Crucial Ballistix Tactical Tracer @1866 8-8-8-2... Black WD6401AALS 2x WD10EZEX Raid-0 EK Supremacy 
CoolingCoolingCoolingCooling
10x Cougar Vortex PWM 3x Helix EK VGA Supremacy Acetal Alphacool NexXxos ST30 240mm, 2x XT45 240mm XSPC X2O 750 
CoolingOSMonitorKeyboard
Jingway DP-600 pump Windows 8.1 Pro x64 ViewSonic VX2250 22" LED Generic HP 
PowerCaseMouseAudio
Rosewill HIVE-650 CM 690 II Advanced B&W  Logitech G700 Xonar DG 
AudioOtherOther
Tc Electronic Impact Twin Fan Controller: Aerocool X-Vision 2x Swiftech PWM Splitter 
  hide details  
Reply
DeskoSaurus X
(22 items)
 
It Does Stuff
(24 items)
 
 
CPUMotherboardGraphicsRAM
4790K 4.7 GHz Z97 MPOWER MAX AC 290X Lightning G. Skill TridentX 2x8GB 10-12-12 
Hard DriveHard DriveCoolingCooling
2x Crucial MX100 + 960GB M500 2x WD Blue RAID EK Supremacy EK-FC R9-290X Lightning 
CoolingCoolingCoolingOS
EK XE 480 + EK CoolStream PE 480 10x Phanteks + 2x Cougar Vortex MCP50X + MCP50X Windows 10 Pro 
MonitorKeyboardPowerCase
ViewSonic VX2250 22" LED Generic HP Corsair AX860i Lian-Li DK-Q2X 
MouseMouse PadAudioOther
Logitech G700 XTRAC Ripper TC Electronic Impact Twin Corsair Commander Mini 
OtherOther
Schiit Vali Kanto Yumi (Bamboo) 
CPUMotherboardGraphicsRAM
FX-8350 4.95GHz 24/7 GA-990FXA-UD3 Sapphire 7870 XT  Mushkin Redline 997051 @1866 8-8-8-24 1T 
RAMHard DriveHard DriveCooling
Crucial Ballistix Tactical Tracer @1866 8-8-8-2... Black WD6401AALS 2x WD10EZEX Raid-0 EK Supremacy 
CoolingCoolingCoolingCooling
10x Cougar Vortex PWM 3x Helix EK VGA Supremacy Acetal Alphacool NexXxos ST30 240mm, 2x XT45 240mm XSPC X2O 750 
CoolingOSMonitorKeyboard
Jingway DP-600 pump Windows 8.1 Pro x64 ViewSonic VX2250 22" LED Generic HP 
PowerCaseMouseAudio
Rosewill HIVE-650 CM 690 II Advanced B&W  Logitech G700 Xonar DG 
AudioOtherOther
Tc Electronic Impact Twin Fan Controller: Aerocool X-Vision 2x Swiftech PWM Splitter 
  hide details  
Reply
post #490 of 1264
Think this is all I can do. Changing anything on my CPU reduces stability-- I can't do diddly squat about it, blasted C2.

I twisted some more wrenches on my ram-- I got tiny speed improvements. It will not let me change any of the first 3 timings, regardless of voltage. This isn't bad, considering this is CAS 9 1600 ram. I can get it to 8's at 1600, but overall this setting is netting me the best speeds.

I'm still getting a 4.57 in cinebench. Think I'm about done here tongue.gif





Edit: Just when I think I'm done, I screw around with some more obscure timing settings and get a huge performance increase and even a latency decrease. Woot!


Edited by Anonaru - 10/29/12 at 4:01pm
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › [OFFICIAL] AMD Phenom II x4 Deneb CPU Owner's Club