Overclock.net › Forums › Case Mods & Cases › Computer Cases › Question for BourneX (bitfenix guy)
New Posts  All Forums:Forum Nav:

Question for BourneX (bitfenix guy)

post #1 of 17
Thread Starter 
For the shinobo XL what is the max thickness radiator you can fit in the roof with one set of 25mm thick fans on it?
post #2 of 17
~55 mm. We threw in a Black Ice GTX 240 Rad in there and a set of Spectre Pro's and it was just fine. thumb.gif
post #3 of 17
Thread Starter 
and thats will a motherboard installed right? (obviously) because a motherboard goes a little higher then the top stand offs.

trying to figure out if

http://www.xs-pc.com/products/radiators/rx-series/rx360-triple-fan-radiator/

will fit in there
Edited by oicwutudidthar - 2/10/12 at 6:44pm
post #4 of 17
That is with the motherboard installed.
post #5 of 17
Thread Starter 
hm ok the rx series is 63mm thick, is 55 the absolute maximum?

Don't really want to have to buy new rads.
post #6 of 17
~55 would be approximately the maximum thickness of the rad with a set of 120mm's.
There's only ~80mm of clearance from the motherboard to the roof.
post #7 of 17
Thread Starter 
frown.gif Guess this case won't work for me then.
post #8 of 17
Give me until Monday/Tuesday when I get someone in the office to get me exact measurements, both in the front and on the roof. It may work in the front.
post #9 of 17
80mm on the top, 84mm on the front.
post #10 of 17
what size rads 240, 280, 360, 420, 480?
Supernova
(12 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2500k EVGA Z68 micro sli 2 EVGA GTX 670s Corsair Vengence 16gb 
Hard DriveHard DriveCoolingCooling
Curcial M4 126gb WD 1tb Koolance 240/360 rad, PMP 450s pump, 370 si blo... 10 Bitfenix Spectre Pro PWN fans 
OSPowerCaseOther
Win 7 x64 NZXT Hale90 v2 1000w Bitfenix Raider - modded Mayhems Aurora SuperNova 
  hide details  
Reply
Supernova
(12 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2500k EVGA Z68 micro sli 2 EVGA GTX 670s Corsair Vengence 16gb 
Hard DriveHard DriveCoolingCooling
Curcial M4 126gb WD 1tb Koolance 240/360 rad, PMP 450s pump, 370 si blo... 10 Bitfenix Spectre Pro PWN fans 
OSPowerCaseOther
Win 7 x64 NZXT Hale90 v2 1000w Bitfenix Raider - modded Mayhems Aurora SuperNova 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › Question for BourneX (bitfenix guy)