OCN FrozenQ Reservoir Owners Club - Page 8

Originally Posted by Deeks 

I had another question to anyone using bitpower 1/2id 3/4od fittings on if they will both fit on the bottom of the res without touching each other ?

Originally Posted by Deeks 

Would it work if i attached one right to it and the other used a 20mm extension male/female and then used a compression fitting on that ?

Originally Posted by netdevil 

Didn't see this thread till now.Awesome that we have a club for these beautiful reservoirs. Here is mine, it took 2 month to arrive but when it was lighted up it left me in awe and well worth it. My ccfl bulb was only lit the top half in the 1st week. I sent an rma request and Alex had a replacement sent with no questions ask. Thanks Alex.
Sorry for the lousy pics and untidy rig not finished yet
Liquid Fusion V Series UV Blue 250mm With Clear caps and side ports
https://frozenqshop.com/index.php/reservoirs/lf/lf250.html

Originally Posted by btwalter 

I like those clear caps, might have to get me some!
on the bottom of your case... acrylic with white vinyl and white lighting under?

Originally Posted by Balsagna 

Have one. The cathode broke in it and whoever assembled it (bought it of off FrozenCPU) did a terrible job with the machining of it. I usually don't rant much about custom products, but I will on it.
The cathode tube acrylic wasn't even screwed to the cap, it was glued and wrapped with nylon and broke as it was cheap. So then I had the hole at the bottom hampering the product from even being used. Contacted FrozenQ and talked to someone named Alex (isn't he the one that runs the place?) anyways. He was very kind and said he'd ship out a product to me first so I could have it as I ship to training in the week. I would cross ship back to him and told me to just put in an RMA request and he'd send it out.
Guess what! I put in the RMA request and never got contacted back and never got a replacement and now I ship so I had to mod the res and seal the hole to get it functional again. Basically, I'm just going to say the res looks nice, the acrylic rod that's used on the helix is nice
But everything else around the tube is pathetically cheap and not machined to good standards and I know this as I work in a machine shop. I won't be using another product from them based on how the quality of the product is.
Here's an example -- I removed the bottom cap where the hole was from the broken cathode/tube so I could seal the hole and the threads on the plastic were ruined where the cap couldn't screw back in. I took it to work and lathed new threads on it myself.
Overally, it was just a cheaply machined flashy expensive res. I couldn't even put 2 compression fittings on it
Sure I'm going to be flamed now.