Overclock.net › Forums › Intel › Intel CPUs › Got my 2600K today, got 4.5Ghz on it
New Posts  All Forums:Forum Nav:

Got my 2600K today, got 4.5Ghz on it

post #1 of 5
Thread Starter 
I got the chip up to 4.5Ghz and set the voltage to 1.325. When under load Cpuz shows the voltage at about 1.287, is this normal for the voltage to drop that much under load? when its at idle the voltage goes back up.

I had ordered a H100 to go with this but got frustrated trying to install it and just said screw it, threw my 212+ back in and it seems to hold it fairly well at this clock. My idle is at about 40c and at load its about 75c after running prime95 for awhile.

Anything that I should try to change with this to make it run better? I tried running 4.7Ghz and as soon as i ran prime 95 the computer froze, jumped voltage up to 1.350, same thing, it froze as soon as I started prime95. I backed it down to 4.5 because I figured upping the voltage anymore would be too much for the 212+ to handle.
Game Rig
(18 items)
 
  
CPUMotherboardGraphicsRAM
i7-2700k @ 5Ghz  ASUS P8Z68-v Gen 3 GTX 1070 X 16GB Corsair Vengeance  
Hard DriveHard DriveOptical DriveCooling
3x Samsung Spinpoint F3 1TB Crucial M4 128GB Asus DVD drive H100 
OSMonitorKeyboardPower
Windows 7 professional Samsung 27" LCD 1080p Ducky Shine (MX brown) AX850 
CaseMouseMouse PadAudio
Corsair 600T SE White Logitech mx518 Steelseries QCK+ ASUS Xonar DX 
Audio
BeyerDynamics DT770 Pro 80 ohm 
  hide details  
Reply
Game Rig
(18 items)
 
  
CPUMotherboardGraphicsRAM
i7-2700k @ 5Ghz  ASUS P8Z68-v Gen 3 GTX 1070 X 16GB Corsair Vengeance  
Hard DriveHard DriveOptical DriveCooling
3x Samsung Spinpoint F3 1TB Crucial M4 128GB Asus DVD drive H100 
OSMonitorKeyboardPower
Windows 7 professional Samsung 27" LCD 1080p Ducky Shine (MX brown) AX850 
CaseMouseMouse PadAudio
Corsair 600T SE White Logitech mx518 Steelseries QCK+ ASUS Xonar DX 
Audio
BeyerDynamics DT770 Pro 80 ohm 
  hide details  
Reply
post #2 of 5
Thats a fairly average voltage for 4.5ghz. Mine will do it at 1.28V but 4.8ghz takes 1.42V. Thats about all the H60 will handle...
post #3 of 5
I think those volts for 4.5ghz is decent but think those temps are a bit high for that clock, I'd recommend at least try another remount with the 212 to try to get teh H100 installed, that should shave a further 5c off loads temps.

My chip needs 1.44v in bios to get 1.412 load which it needs for 4.8ghz, temps max out at 70c, at 5.0ghz, i need 1.52v for 1.5v load, temps are in the high 70's. Its our summer here too btw.
Edited by ttoadd.nz - 2/15/12 at 7:51pm
    
CPUMotherboardGraphicsRAM
[Intel] i7 2600k | 4.8Ghz HT 24/7 [Gigabyte] P67A-UD7-B3  [AMD] Radeon HD6990  [Samsung] 16GB 30nm 1866mhz 
Hard DriveCoolingOSMonitor
[G Skill] Pheonix Pro 60G SSD - Boot | 2TB Sams... Custom EKWB | XSPC | Swiftec | Primochill | Bit... [Windows7] Professional x64 [Acheiva] Shimian ISP-I 1440p 
KeyboardPowerCaseMouse
[CoolerMaster] Storm TK MX-Brown [Corsair] HX1000 | MDPC Sleeved [Silverstone] Modified Temjin TJ07 [Razer] DeathAdder 
Mouse PadAudioOther
Steelseries QCK [Asus] Xonar DG Sennheiser HD558 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
[Intel] i7 2600k | 4.8Ghz HT 24/7 [Gigabyte] P67A-UD7-B3  [AMD] Radeon HD6990  [Samsung] 16GB 30nm 1866mhz 
Hard DriveCoolingOSMonitor
[G Skill] Pheonix Pro 60G SSD - Boot | 2TB Sams... Custom EKWB | XSPC | Swiftec | Primochill | Bit... [Windows7] Professional x64 [Acheiva] Shimian ISP-I 1440p 
KeyboardPowerCaseMouse
[CoolerMaster] Storm TK MX-Brown [Corsair] HX1000 | MDPC Sleeved [Silverstone] Modified Temjin TJ07 [Razer] DeathAdder 
Mouse PadAudioOther
Steelseries QCK [Asus] Xonar DG Sennheiser HD558 
  hide details  
Reply
post #4 of 5

mine does 4.5 at 1.212, maybe lower. I do 4.8 at 1.24 and 5 at 1.368v

 
Gsvlip Dudyrm
(15 items)
 
Oda'maksv
(9 items)
 
CPUMotherboardGraphicsRAM
3770k @ 4.5 1.312 load Zotac Z77 ITX Wifi GTX 1070 Gaming 2126/2249 w/ Hybrid cooler TridentX 16GB 2400MHz 
Hard DriveHard DriveCoolingCooling
Samsung 850 Pro 1TB Seagate 2TB H105 EVGA Hybrid GPU cooler 
OSMonitorKeyboardPower
Windows 10 Asus MG279Q - 24" 144Hz 1080p Filco Majestic II w/ Cherry Reds Seasonic X 760W 
CaseMouseMouse PadAudio
Bitfelix Prodigy Logitech G400 Razer Goliath AKG A701 
AudioAudio
JDS Labs Objective 2 JDS Labs ODAC 
CPUMotherboardGraphicsRAM
Core i5 750 3.99 (190x21) 1.376v Load ASUS P7P55d-E Pro GTX 670 FTW <- Poor overclocker :( 8GB (4x2GB) G.Skill DDR3 1600 
Hard DriveHard DriveOptical DriveOS
Samsung 830 Evo 128GB 2x 2TB  Some DVD drive OSX 10.10.4 
MonitorPowerCaseMouse
Asus 1080P Crap TX 750 HAF 922 G400s 
Mouse PadOther
Apple Keyboard Xbox One controler 
CPURAMHard DriveHard Drive
C2D 2,26GHz under volted @ .978v 8GB  Crucial M4 64GB SSD 500GB Scorpio Black 
OSMonitorKeyboardMouse
OS X 10.0 1280x800 Built-in Trackpad 
Audio
Built-in 
  hide details  
Reply
 
Gsvlip Dudyrm
(15 items)
 
Oda'maksv
(9 items)
 
CPUMotherboardGraphicsRAM
3770k @ 4.5 1.312 load Zotac Z77 ITX Wifi GTX 1070 Gaming 2126/2249 w/ Hybrid cooler TridentX 16GB 2400MHz 
Hard DriveHard DriveCoolingCooling
Samsung 850 Pro 1TB Seagate 2TB H105 EVGA Hybrid GPU cooler 
OSMonitorKeyboardPower
Windows 10 Asus MG279Q - 24" 144Hz 1080p Filco Majestic II w/ Cherry Reds Seasonic X 760W 
CaseMouseMouse PadAudio
Bitfelix Prodigy Logitech G400 Razer Goliath AKG A701 
AudioAudio
JDS Labs Objective 2 JDS Labs ODAC 
CPUMotherboardGraphicsRAM
Core i5 750 3.99 (190x21) 1.376v Load ASUS P7P55d-E Pro GTX 670 FTW <- Poor overclocker :( 8GB (4x2GB) G.Skill DDR3 1600 
Hard DriveHard DriveOptical DriveOS
Samsung 830 Evo 128GB 2x 2TB  Some DVD drive OSX 10.10.4 
MonitorPowerCaseMouse
Asus 1080P Crap TX 750 HAF 922 G400s 
Mouse PadOther
Apple Keyboard Xbox One controler 
CPURAMHard DriveHard Drive
C2D 2,26GHz under volted @ .978v 8GB  Crucial M4 64GB SSD 500GB Scorpio Black 
OSMonitorKeyboardMouse
OS X 10.0 1280x800 Built-in Trackpad 
Audio
Built-in 
  hide details  
Reply
post #5 of 5
Quote:
Originally Posted by Lord Xeb View Post

mine does 4.5 at 1.212, maybe lower. I do 4.8 at 1.24 and 5 at 1.368v

You dont have hyper-threading though... wink.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Got my 2600K today, got 4.5Ghz on it