post #1 of 1
Thread Starter 
Hi everyone.

First: sorry for spelling errors, I'm from Brazil. smile.gif

I come to share my project with you. Basically use this computer to work and, very occasionally, games. My intention is to use a good part of this project in the LGA2011 platform, with the SR-X.

Following is the list of all components that I will use it. Everything is already purchased and on the way, much has already arrived.

Hardware:
MOBO: EVGA SR2
CPU: 2x E5620
Memory: 6x4GB Corsair Vengeance 1600Mhz
GPU: 4x gtx580 DirectCU
PSU 01: Antec TruePower Quattro 1200watts
PSU 02: Silverstone Strider ST1000G 10000watts
CASE: XSPC H2 "Hive" Tower Case
SSD: 02 OCZ Vertex 3 120GB
HDD: 03 Samsung 1TB 7200RPM

CPU loop:
01 XSPC Acrylic Dual 5.25" Bay Reservoir for Laing D5
01 Alphacool VPP655 Single Edition
01 XSPC RX480 Extreme Performance Radiator
3mt Tygon R3400 1/4" ID (3/8" OD) UV Resistant Tubing - Black
02 EK-Supreme HF High Flow CPU Water Block - Acetal+EN (Nickel)
04 Enzotech Compression Fitting G 1/4 Thread - for 1/2" ID and 3/4" OD Tubing - Matte Black
04 Enzotech 45 Degree Rotary Fitting - Male-Female G 1/4 Thread - Matte Black
01 Scythe KM03-BK "KAZE MASTER PRO" 5.25" Bay Mountable 6 Channel Fan Controller - Black
02 Aquacomputer Temperature Sensor - Inner/Outer Thread G1/4
04 Noctua (NF-P12-1300) 1300rpm Premium Silent 120mm Fan - Sleeved

GPU loop:
01 Phobya Radiator Stand - Black - Triple 3x120mm/4x180 "Bench Edition"
01 Phobya XTREME NOVA 1080 ( 9 x 120mm) Radiator
01 Phobya Nova 1080 Radiator Grill 4 x 180mm- Black
04 SilverStone (SST-AP181) 180 mm Air Penetrator fan - Air Channeling Fan - Sleeved
01 Koolance QDC (High Flow) No-Spill Shutoff, Male [For ID: 13mm (1/2"); OD: 19mm (3/4")]
03 Koolance QDC (High Flow) No-Spill Shutoff, Female [For ID: 13mm (1/2"); OD: 19mm (3/4")]
02 Koolance QDC (High Flow) No-Spill Shutoff, Male Panel, Female Threaded
06 Enzotech Compression Fitting G 1/4 Thread - for 1/2" ID and 3/4" OD Tubing - Matte Black
06 Koolance O-Ring, 13.5 x 1.5mm EPDM
01 EK-Reservoir Combo DCP 4.0
01 Water Pumps EK-DCP 4.0 (12V DC Water Pump)
06 Enzotech (BRMF-G1/4-90) 90 Degree Rotary Fitting G 1/4 Thread - Matte Black
05mt Tygon R3400 1/2" ID (3/4" OD) UV Resistant Tubing - Black
01 ModMyToys 4-Pin Power Distribution PCB - 8-Way Block


Coolant:
PrimoChill ICE Non-Conductive Liquid Cooling Fluid (32 oz.) - Clear

Case acessories:
02 Enermax T.B. Silence 120mm LED Fan w/ Twister Bearings - Blue
01 Bitspower Anti-Vibration Ridged M3/M4 Screw Washers (Set of 20) - Black
01 Lian Li Dual PSU Bracket for PC-V2010B Cases - Black
01 Koolance 4-Fan Radiator Shroud, Black
02 Lian Li Anti-Vibration Thumb Screws ( 20 pcs Bag ) - Black
01 Lian-li EX-36B1 SATA HDD Internal Rackmount Kit for 4 x 3.5" & 2 x 2.5" HDD Bays - Black

01 Lian Li EX-H22SX 2 x 5.25" Bay Device Holding Dual Hot Swap 3.5" SATA HDD - All Black
01 Mod/Smart 1 in. Wire Bundle Pass-Thru 4-Pack - Black
02 Phobya Radiator Grill Double (240) - Hole Series - Black

Red = waiting for international delivery

CPU Loop:
loop_CPU.jpg

The XSPC H2 is specifically designed for watercooling and the coolest is that it is equal lego, all dismounted.
xspc_001.jpg
xspc_002.jpg
xspc_003.jpg
xspc_004.jpg
xspc_005.jpg
xspc_006.jpg
xspc_008.jpg

First assembly, using the cooling system from Corsair (H100). I did a push-pull system using the original coolers and coolers Akasa Apache. The result was good temperatures and a symphony of hell, a lot of noise when it was needed the machine running at 100%. I used this system for about 3 months
xspc_0001.jpg
xspc_0002.jpg
xspc_0003.jpg
xspc_0004.jpg
xspc_0005.jpg
xspc_0006.jpg
xspc_0007.jpg
xspc_0008.jpg
xspc_0009.jpg
xspc_0010.jpg
xspc_0011.jpg
xspc_0012.jpg
xspc_0013.jpg
xspc_0014.jpg
xspc_0015.jpg
xspc_0016.jpg

Second assembly: H100 exits.
wc_002.jpg
wc_003.jpg
wc_004.jpg
wc_005.jpg

Comparison between the H100 and the XSPC RX480 Extreme Performance:
wc_006.jpg
wc_007.jpg
wc_008.jpg
wc_009.jpg

Whole system disassembled for installation of the radiator:
wc_010.jpg
wc_011.jpg
wc_012.jpg
wc_013.jpg
wc_014.jpg
wc_015.jpg
wc_016.jpg

Installation of the EK blocks:
wc_017.jpg
wc_018.jpg
wc_019.jpg
wc_020.jpg
wc_021.jpg
wc_022.jpg
wc_023.jpg
wc_024.jpg
wc_025.jpg
wc_026.jpg
wc_027.jpg
wc_028.jpg

Installation of the loop:
wc_029.jpg
wc_030.jpg
wc_031.jpg
wc_032.jpg
wc_033.jpg
wc_034.jpg

Second PSU. It will be responsible for insuring the wave with 2GPUS + WC.
silver_001.jpg
silver_002.jpg
silver_003.jpg
silver_004.jpg
silver_005.jpg
silver_006.jpg
Edited by dimobr - 2/20/12 at 5:02pm