Overclock.net › Forums › Graphics Cards › Graphics Cards - General › problem after Overclock
New Posts  All Forums:Forum Nav:

problem after Overclock

post #1 of 3
Thread Starter 
Hello guys, 2 days ago I was overclocking the gpu and Set 900@1.050v but more was not stable and I set it 880@1.0v then BOTH without artifacts on evga oc scanner but I saw 1 (lack a texture on a rock:nfs the run) so i underclocked it to 850mhz@stock vcore, Today In the mornign I started the pc and it was Ok no problems wih it, then in the afternoon after I arrived home I was surfing the net and the screen said no signal detected, and i listened like the fan(100%) bacame slower or it shutdown(or the vga too) now 1 hours ago I started the pc and it did the same twice and then no, I´m using it with 850/1700/3832mhz and stock voltage I set locked vcore in msi afterburner

285 drivers the lastest version, widnows 7 home premium x86, and I was usign the GPU oced like 2 days


Do you knwo what it could be?
Edited by PontiacGTX - 2/20/12 at 4:16pm
post #2 of 3
Reset everything to stock on it, stress it, and see if it does it again. This the first time this has happened?
post #3 of 3
Thread Starter 
yes it´s first time and I played nfs the run 1 hour without problems

Windows had in a log this problem
0x00000116 (0x856ef008, 0x937a987a, 0xc000009a, 0x00000004).
Yerterday i installed nfs the run with its Dx11(it installed it)

http://www.sevenforums.com/crash-lockup-debug-how/63320-stop-0x116-video_tdr_error-troubleshooting.html

is there a possible solution with restoring system? before the game
Edited by PontiacGTX - 2/20/12 at 6:21pm
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Graphics Cards - General
Overclock.net › Forums › Graphics Cards › Graphics Cards - General › problem after Overclock