Overclock.net › Forums › Cooling › Water Cooling › Fan setup for RS240 rad in Corsair 600t
New Posts  All Forums:Forum Nav:

Fan setup for RS240 rad in Corsair 600t

post #1 of 6
Thread Starter 
I have an rs240 mounted in the top of my corsair 600t, i have 2 Scythe Slipstream 1900rpm fans mounted in the top grill and exhausting for the rs240.

within the case, i was able to mount 1 scythe as push, on the rad.

my question is, is that 1 scythe even necessary? it seems like the 2 up top move so much air that an real push setup isnt going to help much.

If having push fans really makes a big difference, would it be better to go with some super slim fan, so i can fit 2 on the push side?

i have 1 200m bitfenix spectre as intake on the front of the case and my last scythe setup as exhaust at the top back of the case.
Nothing Special
(16 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 920 D0 4.2ghz @ 1.45v Gigabyte X58-USB3 MSI HD7970 1100/1500@Stock 12gb Patriot Viper 2 Sector 7 DDR3 2000 
Hard DriveCoolingCoolingCooling
Patriot Pyro 120GB SSD + (3) 160GB WD in Raid5 Rasa 750 RS240 Kit Phobya Extreme 200mm Heatkiller 3.0 Radeon HD7970 GPU Block 
OSPowerCase
Win7 64-bit Antec Earthwatts 750w Corsair Graphite 600T 
  hide details  
Reply
Nothing Special
(16 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 920 D0 4.2ghz @ 1.45v Gigabyte X58-USB3 MSI HD7970 1100/1500@Stock 12gb Patriot Viper 2 Sector 7 DDR3 2000 
Hard DriveCoolingCoolingCooling
Patriot Pyro 120GB SSD + (3) 160GB WD in Raid5 Rasa 750 RS240 Kit Phobya Extreme 200mm Heatkiller 3.0 Radeon HD7970 GPU Block 
OSPowerCase
Win7 64-bit Antec Earthwatts 750w Corsair Graphite 600T 
  hide details  
Reply
post #2 of 6
Thread Starter 
Does anyone have any suggestions?

Does it even matter to have push fans, when the pull fans are moving 90-110+ cfm of air on such a thin rad?
Nothing Special
(16 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 920 D0 4.2ghz @ 1.45v Gigabyte X58-USB3 MSI HD7970 1100/1500@Stock 12gb Patriot Viper 2 Sector 7 DDR3 2000 
Hard DriveCoolingCoolingCooling
Patriot Pyro 120GB SSD + (3) 160GB WD in Raid5 Rasa 750 RS240 Kit Phobya Extreme 200mm Heatkiller 3.0 Radeon HD7970 GPU Block 
OSPowerCase
Win7 64-bit Antec Earthwatts 750w Corsair Graphite 600T 
  hide details  
Reply
Nothing Special
(16 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 920 D0 4.2ghz @ 1.45v Gigabyte X58-USB3 MSI HD7970 1100/1500@Stock 12gb Patriot Viper 2 Sector 7 DDR3 2000 
Hard DriveCoolingCoolingCooling
Patriot Pyro 120GB SSD + (3) 160GB WD in Raid5 Rasa 750 RS240 Kit Phobya Extreme 200mm Heatkiller 3.0 Radeon HD7970 GPU Block 
OSPowerCase
Win7 64-bit Antec Earthwatts 750w Corsair Graphite 600T 
  hide details  
Reply
post #3 of 6
Most of the time you get the best performance with push/pull setup and then push setup comes in at a very close second. If you do push/pull exhausting out your case one important thing to remember is what your air pressure is(positive/negative). I have the rs240 and had it setup in in pull only mode and wasn't happy with the temps. So no I'm going to run push/pull. Not sure if it is going to be exhaust or intake yet.
post #4 of 6
Thread Starter 
do you remember what kind of fans you were using in your pull setup?

the only reason i ask is because these scythe's move A LOT OF AIR. I have them pretty much turned all the way up, all of the time.

If having something on the push side is that important, i am thinking about going with one of the super slim fans, just to get both to fit... they don't move nearly as much air as the scythes though.
Nothing Special
(16 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 920 D0 4.2ghz @ 1.45v Gigabyte X58-USB3 MSI HD7970 1100/1500@Stock 12gb Patriot Viper 2 Sector 7 DDR3 2000 
Hard DriveCoolingCoolingCooling
Patriot Pyro 120GB SSD + (3) 160GB WD in Raid5 Rasa 750 RS240 Kit Phobya Extreme 200mm Heatkiller 3.0 Radeon HD7970 GPU Block 
OSPowerCase
Win7 64-bit Antec Earthwatts 750w Corsair Graphite 600T 
  hide details  
Reply
Nothing Special
(16 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 920 D0 4.2ghz @ 1.45v Gigabyte X58-USB3 MSI HD7970 1100/1500@Stock 12gb Patriot Viper 2 Sector 7 DDR3 2000 
Hard DriveCoolingCoolingCooling
Patriot Pyro 120GB SSD + (3) 160GB WD in Raid5 Rasa 750 RS240 Kit Phobya Extreme 200mm Heatkiller 3.0 Radeon HD7970 GPU Block 
OSPowerCase
Win7 64-bit Antec Earthwatts 750w Corsair Graphite 600T 
  hide details  
Reply
post #5 of 6
i was using the xspc fans 1650rpm's not sure of the cfm. I'm now upgrading to ap-15's in push pull
post #6 of 6
Thread Starter 
ok... i think i'll go ahead and keep an eye out for some ultra slim fans... they just move such a small amount of air :/

if i can use the 20mm as opposed to the 12mm, that would make a big difference, it's just pretty tight inside that case there lol
Nothing Special
(16 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 920 D0 4.2ghz @ 1.45v Gigabyte X58-USB3 MSI HD7970 1100/1500@Stock 12gb Patriot Viper 2 Sector 7 DDR3 2000 
Hard DriveCoolingCoolingCooling
Patriot Pyro 120GB SSD + (3) 160GB WD in Raid5 Rasa 750 RS240 Kit Phobya Extreme 200mm Heatkiller 3.0 Radeon HD7970 GPU Block 
OSPowerCase
Win7 64-bit Antec Earthwatts 750w Corsair Graphite 600T 
  hide details  
Reply
Nothing Special
(16 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 920 D0 4.2ghz @ 1.45v Gigabyte X58-USB3 MSI HD7970 1100/1500@Stock 12gb Patriot Viper 2 Sector 7 DDR3 2000 
Hard DriveCoolingCoolingCooling
Patriot Pyro 120GB SSD + (3) 160GB WD in Raid5 Rasa 750 RS240 Kit Phobya Extreme 200mm Heatkiller 3.0 Radeon HD7970 GPU Block 
OSPowerCase
Win7 64-bit Antec Earthwatts 750w Corsair Graphite 600T 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Fan setup for RS240 rad in Corsair 600t