Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Pre-Build Questions
New Posts  All Forums:Forum Nav:

Pre-Build Questions

post #1 of 9
Thread Starter 
I am currently doing some planning on my next build. I am looking to do my first custom loop and was curious if any experienced members could maybe help with some questions I had.

I am thinking about doing the build in a Lian-Li PC-Z70. My idea was to cut the HDD rack to accommodate a 120mm x 360mm radiator and then have a 120mm x 280mm radiator in the roof of the case. As far as fans are concerned I was planning on using Scythe Gentle Typhoons AP-15s on the lower radiator (push/pull). On the top radiator I wanted to use 4 red LED fans in a push pull configuration. I was going to flip the rear fan around for intake to the top radiator.

1. Is this build even feasible and advisable?
2. Does anyone have a good suggestion for the top fans(140mm x 140mm)? I am not set on having LED fans there, but I believe it would look good.
3. How thick of a radiator can I fit in the top and the HDD rack? I am confident the ones that I linked will fit.
4. I was planning on doing a custom paint to the exterior and maybe the interior. I was wondering how easy or hard is it to remove the parts to be painted?


600
Red is LED Fans, Black is the radiators and the Grey is the Gentle Typhoons. (please excuse my terrible drawing.)


I was also considering using the Corsair 800D and had a couple of questions pertaining to that case as well.
1. How easy is it to remove the lower HDD cage?
2. Will a single 120 x 360 radiator be able to cool the CPU and 3 graphics cards or would it be advisable to add a 120mm x 120mm?
3. How easy or hard is it to remove the exterior panels and such for custom painting?

I don't have anything set in stone. I am merely looking for some advice on how to do this properly. Thank you for you help. (I am sorry if this is in the wrong forum. I was split between this one and the Water Cooling.)
Edited by kj1060 - 2/22/12 at 8:09pm
N7 Armor
(14 items)
 
Liara
(12 items)
 
 
CPUMotherboardGraphicsGraphics
Intel Core i7-3930k MSI Big Bang - Xpower II MSI Radeon HD 7970 MSI Radeon HD 7970 
GraphicsRAMHard DriveHard Drive
MSI Radeon HD 7970 Corsair Dominator GT Intel 520 Series Intel 520 Series 
OSKeyboardPowerCase
Windows 7 Razer Blackwidow Ultimate Mass Effect 3 Edition Corsair AX1200 NZXT Switch 810 
MouseMouse Pad
Razer Imperator Mass Effect 3 Edition Razer Mass Effects 3 Vespula 
  hide details  
Reply
N7 Armor
(14 items)
 
Liara
(12 items)
 
 
CPUMotherboardGraphicsGraphics
Intel Core i7-3930k MSI Big Bang - Xpower II MSI Radeon HD 7970 MSI Radeon HD 7970 
GraphicsRAMHard DriveHard Drive
MSI Radeon HD 7970 Corsair Dominator GT Intel 520 Series Intel 520 Series 
OSKeyboardPowerCase
Windows 7 Razer Blackwidow Ultimate Mass Effect 3 Edition Corsair AX1200 NZXT Switch 810 
MouseMouse Pad
Razer Imperator Mass Effect 3 Edition Razer Mass Effects 3 Vespula 
  hide details  
Reply
post #2 of 9
Either section is fine.

Is there a particular reason for the 800D or Lian-Li choices? I would recommend the Switch 810 if you want a 360 and 240 with no modding (and cheaper). I'll answer your questions as best I can.

1. I wouldn't advise it, but I'll bet its doable.
2. Not sure who makes red LED 140MMs, but they're probably mostly equal.
3. Without specs I can't guarantee anything. Judging by the picture, the 280 will probably fit, maybe not with push/pull fans though. The front will fit anything you want if you're cutting the HDD rack.
4. A full paint job would include removing the rivets and then replacing them with new rivets or screws. You could remove all the plastic and paint what's available (assuming the case is disassembleable), which wouldn't be too bad.

1. No idea, never looked into the 800D.
2. A 360 probably won't handle CPU + 3x GPU. Actually, make that almost definitely won't. Your rig says 2500K and 460, if its 3 460s, definitely not. I'd recommend a 360 + 240 or more.
3. No idea again, sorry.
     
CPUMotherboardGraphicsRAM
2600K @ 5.0 ASUS Maximus IV Extreme Sapphire/Powercolor 7950 CF G.Skill Ripjaws X 4x4GB 
Hard DriveHard DriveCoolingCooling
OCZ Vertex 3 60GB's RAID 0 VelociRaptor 300GB EK Maximus IV Block EK FC-7950 Block x2 
CoolingCoolingCoolingCooling
EK Supreme HF Block D5 w/ BP Dress-up Kit XSPC EX240 Black Ice SR1 360 
CoolingCoolingOSMonitor
Primochill PrimoFlex 1/2" ID Black 14 NZXT Fans Windows 7 Professional x64 3x AOC 2436V 
KeyboardPowerCaseMouse
Razer BlackWidow Ultimate BF3 Edition Corsair HX1000 NZXT Switch 810 Black Razer Imperator BF3 Edition 
AudioAudio
Asus Xonar Essence STX Beyerdynamic DT770 250 Ohm 
CPUMotherboardGraphicsRAM
i5-2500K Asus Maximus IV Gene-Z AMD Radeon HD 5970 G.Skill Ripjaws X DDR3-1600 
Hard DriveHard DriveCoolingCooling
Vertex 3 60GB RAID 0 VelociRaptor 300GB XSPC EX240 Rad Black Ice GT 92MM Rad 
CoolingCoolingCoolingCooling
Black Ice GT 120MM Rad EK Supreme HF CPU Block EK 5970 Block XSPC 450 Pump/Res Combo 
OSMonitorKeyboardPower
Windows 7 Professional x64 3x AOC 2436vw Razer Black Widow Ultimate BF3 Edition Rosewill 750W HIVE 
CaseMouseMouse PadAudio
NZXT Vulcan Razer Imperator BF3 Edition Razer Scarab BF3 Edition ASUS Xonar Essence STX 
Audio
Beyerdynamic DT770 250 Ohm 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
2600K @ 5.0 ASUS Maximus IV Extreme Sapphire/Powercolor 7950 CF G.Skill Ripjaws X 4x4GB 
Hard DriveHard DriveCoolingCooling
OCZ Vertex 3 60GB's RAID 0 VelociRaptor 300GB EK Maximus IV Block EK FC-7950 Block x2 
CoolingCoolingCoolingCooling
EK Supreme HF Block D5 w/ BP Dress-up Kit XSPC EX240 Black Ice SR1 360 
CoolingCoolingOSMonitor
Primochill PrimoFlex 1/2" ID Black 14 NZXT Fans Windows 7 Professional x64 3x AOC 2436V 
KeyboardPowerCaseMouse
Razer BlackWidow Ultimate BF3 Edition Corsair HX1000 NZXT Switch 810 Black Razer Imperator BF3 Edition 
AudioAudio
Asus Xonar Essence STX Beyerdynamic DT770 250 Ohm 
CPUMotherboardGraphicsRAM
i5-2500K Asus Maximus IV Gene-Z AMD Radeon HD 5970 G.Skill Ripjaws X DDR3-1600 
Hard DriveHard DriveCoolingCooling
Vertex 3 60GB RAID 0 VelociRaptor 300GB XSPC EX240 Rad Black Ice GT 92MM Rad 
CoolingCoolingCoolingCooling
Black Ice GT 120MM Rad EK Supreme HF CPU Block EK 5970 Block XSPC 450 Pump/Res Combo 
OSMonitorKeyboardPower
Windows 7 Professional x64 3x AOC 2436vw Razer Black Widow Ultimate BF3 Edition Rosewill 750W HIVE 
CaseMouseMouse PadAudio
NZXT Vulcan Razer Imperator BF3 Edition Razer Scarab BF3 Edition ASUS Xonar Essence STX 
Audio
Beyerdynamic DT770 250 Ohm 
  hide details  
Reply
post #3 of 9
Thread Starter 
Thank you for responding so quickly. I was interested in the 800D and the Lian-Li because I wanted a case with a clean, flat front and flat roof with support for water cooling. I know the 800D is a favorite of many people doing water cooling. Then I saw the Lian-Li and thought maybe I could do a build where the hot air was not blown into the case but rather blown from the left to the right. I will definitely look at the Switch 810 again, completely forgot about it. Though I am not really thrilled about the venting on the roof of the case.

I was planning on doing a completely new build from my signature rig, probably socket 2011 when Ivy Bridge-E is released.

I should probably clarify I was planning on having the radiators located where I normally would have put the HDD. So there would still be some structural support from the HDD rack.
N7 Armor
(14 items)
 
Liara
(12 items)
 
 
CPUMotherboardGraphicsGraphics
Intel Core i7-3930k MSI Big Bang - Xpower II MSI Radeon HD 7970 MSI Radeon HD 7970 
GraphicsRAMHard DriveHard Drive
MSI Radeon HD 7970 Corsair Dominator GT Intel 520 Series Intel 520 Series 
OSKeyboardPowerCase
Windows 7 Razer Blackwidow Ultimate Mass Effect 3 Edition Corsair AX1200 NZXT Switch 810 
MouseMouse Pad
Razer Imperator Mass Effect 3 Edition Razer Mass Effects 3 Vespula 
  hide details  
Reply
N7 Armor
(14 items)
 
Liara
(12 items)
 
 
CPUMotherboardGraphicsGraphics
Intel Core i7-3930k MSI Big Bang - Xpower II MSI Radeon HD 7970 MSI Radeon HD 7970 
GraphicsRAMHard DriveHard Drive
MSI Radeon HD 7970 Corsair Dominator GT Intel 520 Series Intel 520 Series 
OSKeyboardPowerCase
Windows 7 Razer Blackwidow Ultimate Mass Effect 3 Edition Corsair AX1200 NZXT Switch 810 
MouseMouse Pad
Razer Imperator Mass Effect 3 Edition Razer Mass Effects 3 Vespula 
  hide details  
Reply
post #4 of 9
Thread Starter 
I am actually beginning to really like the NZXT Switch 810, but I had a few more questions regarding it/ How easy is it to remove all the "white" parts on a white version of the NZXT Switch 810? Again I am asking because I wanted to do a custom paint on it. I was also wondering if can you get a radiator and the top fans into the top part of the cage or would you have to do fans on the top and then the radiator and fans attached inside the case (pretty sure the latter is what will happen, just want to confirm)? Thank you for the help.
N7 Armor
(14 items)
 
Liara
(12 items)
 
 
CPUMotherboardGraphicsGraphics
Intel Core i7-3930k MSI Big Bang - Xpower II MSI Radeon HD 7970 MSI Radeon HD 7970 
GraphicsRAMHard DriveHard Drive
MSI Radeon HD 7970 Corsair Dominator GT Intel 520 Series Intel 520 Series 
OSKeyboardPowerCase
Windows 7 Razer Blackwidow Ultimate Mass Effect 3 Edition Corsair AX1200 NZXT Switch 810 
MouseMouse Pad
Razer Imperator Mass Effect 3 Edition Razer Mass Effects 3 Vespula 
  hide details  
Reply
N7 Armor
(14 items)
 
Liara
(12 items)
 
 
CPUMotherboardGraphicsGraphics
Intel Core i7-3930k MSI Big Bang - Xpower II MSI Radeon HD 7970 MSI Radeon HD 7970 
GraphicsRAMHard DriveHard Drive
MSI Radeon HD 7970 Corsair Dominator GT Intel 520 Series Intel 520 Series 
OSKeyboardPowerCase
Windows 7 Razer Blackwidow Ultimate Mass Effect 3 Edition Corsair AX1200 NZXT Switch 810 
MouseMouse Pad
Razer Imperator Mass Effect 3 Edition Razer Mass Effects 3 Vespula 
  hide details  
Reply
post #5 of 9
360 and a 240 rad will be enough to cool 3 GPUs and a CPU but dont overclock the GPUs
post #6 of 9
Quote:
Originally Posted by kj1060 View Post

I am actually beginning to really like the NZXT Switch 810, but I had a few more questions regarding it/ How easy is it to remove all the "white" parts on a white version of the NZXT Switch 810? Again I am asking because I wanted to do a custom paint on it. I was also wondering if can you get a radiator and the top fans into the top part of the cage or would you have to do fans on the top and then the radiator and fans attached inside the case (pretty sure the latter is what will happen, just want to confirm)? Thank you for the help.

I removed all the parts pretty easily on my black one. Most of them are just latching studs like most cases. I think you could disassemble it entirely in about 30 minutes or less.

Do you mean the top area that is under the vents? If you don't put the vents back (wouldn't advise that), you could put the rad and fans there. However, if you do keep the vent top, it would only be fans and then the rad and other fans would be inside.
Quote:
Originally Posted by kieran13 View Post

360 and a 240 rad will be enough to cool 3 GPUs and a CPU but dont overclock the GPUs

Yeah, just depends on the cards.
     
CPUMotherboardGraphicsRAM
2600K @ 5.0 ASUS Maximus IV Extreme Sapphire/Powercolor 7950 CF G.Skill Ripjaws X 4x4GB 
Hard DriveHard DriveCoolingCooling
OCZ Vertex 3 60GB's RAID 0 VelociRaptor 300GB EK Maximus IV Block EK FC-7950 Block x2 
CoolingCoolingCoolingCooling
EK Supreme HF Block D5 w/ BP Dress-up Kit XSPC EX240 Black Ice SR1 360 
CoolingCoolingOSMonitor
Primochill PrimoFlex 1/2" ID Black 14 NZXT Fans Windows 7 Professional x64 3x AOC 2436V 
KeyboardPowerCaseMouse
Razer BlackWidow Ultimate BF3 Edition Corsair HX1000 NZXT Switch 810 Black Razer Imperator BF3 Edition 
AudioAudio
Asus Xonar Essence STX Beyerdynamic DT770 250 Ohm 
CPUMotherboardGraphicsRAM
i5-2500K Asus Maximus IV Gene-Z AMD Radeon HD 5970 G.Skill Ripjaws X DDR3-1600 
Hard DriveHard DriveCoolingCooling
Vertex 3 60GB RAID 0 VelociRaptor 300GB XSPC EX240 Rad Black Ice GT 92MM Rad 
CoolingCoolingCoolingCooling
Black Ice GT 120MM Rad EK Supreme HF CPU Block EK 5970 Block XSPC 450 Pump/Res Combo 
OSMonitorKeyboardPower
Windows 7 Professional x64 3x AOC 2436vw Razer Black Widow Ultimate BF3 Edition Rosewill 750W HIVE 
CaseMouseMouse PadAudio
NZXT Vulcan Razer Imperator BF3 Edition Razer Scarab BF3 Edition ASUS Xonar Essence STX 
Audio
Beyerdynamic DT770 250 Ohm 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
2600K @ 5.0 ASUS Maximus IV Extreme Sapphire/Powercolor 7950 CF G.Skill Ripjaws X 4x4GB 
Hard DriveHard DriveCoolingCooling
OCZ Vertex 3 60GB's RAID 0 VelociRaptor 300GB EK Maximus IV Block EK FC-7950 Block x2 
CoolingCoolingCoolingCooling
EK Supreme HF Block D5 w/ BP Dress-up Kit XSPC EX240 Black Ice SR1 360 
CoolingCoolingOSMonitor
Primochill PrimoFlex 1/2" ID Black 14 NZXT Fans Windows 7 Professional x64 3x AOC 2436V 
KeyboardPowerCaseMouse
Razer BlackWidow Ultimate BF3 Edition Corsair HX1000 NZXT Switch 810 Black Razer Imperator BF3 Edition 
AudioAudio
Asus Xonar Essence STX Beyerdynamic DT770 250 Ohm 
CPUMotherboardGraphicsRAM
i5-2500K Asus Maximus IV Gene-Z AMD Radeon HD 5970 G.Skill Ripjaws X DDR3-1600 
Hard DriveHard DriveCoolingCooling
Vertex 3 60GB RAID 0 VelociRaptor 300GB XSPC EX240 Rad Black Ice GT 92MM Rad 
CoolingCoolingCoolingCooling
Black Ice GT 120MM Rad EK Supreme HF CPU Block EK 5970 Block XSPC 450 Pump/Res Combo 
OSMonitorKeyboardPower
Windows 7 Professional x64 3x AOC 2436vw Razer Black Widow Ultimate BF3 Edition Rosewill 750W HIVE 
CaseMouseMouse PadAudio
NZXT Vulcan Razer Imperator BF3 Edition Razer Scarab BF3 Edition ASUS Xonar Essence STX 
Audio
Beyerdynamic DT770 250 Ohm 
  hide details  
Reply
post #7 of 9
Thread Starter 
Thanks for the help. I think I am set as far as which case to get, but my only concern would be will the metal painted look any different than the plastic painted. My initial guess would be yes.

Edit: Actually what color is the Power and HDD Led on the black one? Is it possible to get another color for it?
N7 Armor
(14 items)
 
Liara
(12 items)
 
 
CPUMotherboardGraphicsGraphics
Intel Core i7-3930k MSI Big Bang - Xpower II MSI Radeon HD 7970 MSI Radeon HD 7970 
GraphicsRAMHard DriveHard Drive
MSI Radeon HD 7970 Corsair Dominator GT Intel 520 Series Intel 520 Series 
OSKeyboardPowerCase
Windows 7 Razer Blackwidow Ultimate Mass Effect 3 Edition Corsair AX1200 NZXT Switch 810 
MouseMouse Pad
Razer Imperator Mass Effect 3 Edition Razer Mass Effects 3 Vespula 
  hide details  
Reply
N7 Armor
(14 items)
 
Liara
(12 items)
 
 
CPUMotherboardGraphicsGraphics
Intel Core i7-3930k MSI Big Bang - Xpower II MSI Radeon HD 7970 MSI Radeon HD 7970 
GraphicsRAMHard DriveHard Drive
MSI Radeon HD 7970 Corsair Dominator GT Intel 520 Series Intel 520 Series 
OSKeyboardPowerCase
Windows 7 Razer Blackwidow Ultimate Mass Effect 3 Edition Corsair AX1200 NZXT Switch 810 
MouseMouse Pad
Razer Imperator Mass Effect 3 Edition Razer Mass Effects 3 Vespula 
  hide details  
Reply
post #8 of 9
Quote:
Originally Posted by kj1060 View Post

Thanks for the help. I think I am set as far as which case to get, but my only concern would be will the metal painted look any different than the plastic painted. My initial guess would be yes.
Edit: Actually what color is the Power and HDD Led on the black one? Is it possible to get another color for it?

Yes, simply due to the nature of the materials being painted. That being said, you could get pretty close if you tried.

The power and HDD are both white LEDs. You could replace the LEDs with a different color for about $1 yourself.
     
CPUMotherboardGraphicsRAM
2600K @ 5.0 ASUS Maximus IV Extreme Sapphire/Powercolor 7950 CF G.Skill Ripjaws X 4x4GB 
Hard DriveHard DriveCoolingCooling
OCZ Vertex 3 60GB's RAID 0 VelociRaptor 300GB EK Maximus IV Block EK FC-7950 Block x2 
CoolingCoolingCoolingCooling
EK Supreme HF Block D5 w/ BP Dress-up Kit XSPC EX240 Black Ice SR1 360 
CoolingCoolingOSMonitor
Primochill PrimoFlex 1/2" ID Black 14 NZXT Fans Windows 7 Professional x64 3x AOC 2436V 
KeyboardPowerCaseMouse
Razer BlackWidow Ultimate BF3 Edition Corsair HX1000 NZXT Switch 810 Black Razer Imperator BF3 Edition 
AudioAudio
Asus Xonar Essence STX Beyerdynamic DT770 250 Ohm 
CPUMotherboardGraphicsRAM
i5-2500K Asus Maximus IV Gene-Z AMD Radeon HD 5970 G.Skill Ripjaws X DDR3-1600 
Hard DriveHard DriveCoolingCooling
Vertex 3 60GB RAID 0 VelociRaptor 300GB XSPC EX240 Rad Black Ice GT 92MM Rad 
CoolingCoolingCoolingCooling
Black Ice GT 120MM Rad EK Supreme HF CPU Block EK 5970 Block XSPC 450 Pump/Res Combo 
OSMonitorKeyboardPower
Windows 7 Professional x64 3x AOC 2436vw Razer Black Widow Ultimate BF3 Edition Rosewill 750W HIVE 
CaseMouseMouse PadAudio
NZXT Vulcan Razer Imperator BF3 Edition Razer Scarab BF3 Edition ASUS Xonar Essence STX 
Audio
Beyerdynamic DT770 250 Ohm 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
2600K @ 5.0 ASUS Maximus IV Extreme Sapphire/Powercolor 7950 CF G.Skill Ripjaws X 4x4GB 
Hard DriveHard DriveCoolingCooling
OCZ Vertex 3 60GB's RAID 0 VelociRaptor 300GB EK Maximus IV Block EK FC-7950 Block x2 
CoolingCoolingCoolingCooling
EK Supreme HF Block D5 w/ BP Dress-up Kit XSPC EX240 Black Ice SR1 360 
CoolingCoolingOSMonitor
Primochill PrimoFlex 1/2" ID Black 14 NZXT Fans Windows 7 Professional x64 3x AOC 2436V 
KeyboardPowerCaseMouse
Razer BlackWidow Ultimate BF3 Edition Corsair HX1000 NZXT Switch 810 Black Razer Imperator BF3 Edition 
AudioAudio
Asus Xonar Essence STX Beyerdynamic DT770 250 Ohm 
CPUMotherboardGraphicsRAM
i5-2500K Asus Maximus IV Gene-Z AMD Radeon HD 5970 G.Skill Ripjaws X DDR3-1600 
Hard DriveHard DriveCoolingCooling
Vertex 3 60GB RAID 0 VelociRaptor 300GB XSPC EX240 Rad Black Ice GT 92MM Rad 
CoolingCoolingCoolingCooling
Black Ice GT 120MM Rad EK Supreme HF CPU Block EK 5970 Block XSPC 450 Pump/Res Combo 
OSMonitorKeyboardPower
Windows 7 Professional x64 3x AOC 2436vw Razer Black Widow Ultimate BF3 Edition Rosewill 750W HIVE 
CaseMouseMouse PadAudio
NZXT Vulcan Razer Imperator BF3 Edition Razer Scarab BF3 Edition ASUS Xonar Essence STX 
Audio
Beyerdynamic DT770 250 Ohm 
  hide details  
Reply
post #9 of 9
Thread Starter 
I probably should move this to the Water Cooling forum, but I figured it would be better to not double post.

So I got my Switch 810 today and I wanted to do some final questions/thoughts before buying the radiators. I haven't figured out which motherboard (can't decide if I will wait for Ivy-bridge or not), CPU, and Video Cards (waiting to see what Nvidia brings to the table) yet, because my main focus right now is getting the case painted, power supply cabling done, and making sure that everything will fit.

I was planning on going with these parts in for water cooling:
Top Radiator: Coolgate Triple 120
Bottom Radiator: Coolgate Double 120
Reservoir: FrozenQ PC Mods
Pump: Swiftech MCP655
Tubing: PrimoChill Pro Red
Compression fitting: Bitspower (these add up fast! bigeyedsmiley.png)
Radiator Fans: Scythe GT-15
Case Fans: Spectre Pro 140 (front 2, rear exhaust, maybe 1 in the middle on the HDD rack)

Current Design:
648

Questions:
1. I was wondering if I would have issues between the top radiator and the heat sink, with say an Asus Rampage IV Extreme or MSI Big Bang XPower 2? (my biggest question)
2. Anyone have some good mounting ideas for the pump? I am thinking I will probably have it located somewhere right below the reservoir. I doubt it will fit between the PSU and the 240 in the bottom with an AX1200 in there.
3. Are a drain point or fill point necessary? Seen a few build with them, but see more without.
4. Will I need any angled fittings? I am thinking I might need some 45's on the top radiator and maybe the bottom one.

A big thanks to TheJesus for answering my messages.
N7 Armor
(14 items)
 
Liara
(12 items)
 
 
CPUMotherboardGraphicsGraphics
Intel Core i7-3930k MSI Big Bang - Xpower II MSI Radeon HD 7970 MSI Radeon HD 7970 
GraphicsRAMHard DriveHard Drive
MSI Radeon HD 7970 Corsair Dominator GT Intel 520 Series Intel 520 Series 
OSKeyboardPowerCase
Windows 7 Razer Blackwidow Ultimate Mass Effect 3 Edition Corsair AX1200 NZXT Switch 810 
MouseMouse Pad
Razer Imperator Mass Effect 3 Edition Razer Mass Effects 3 Vespula 
  hide details  
Reply
N7 Armor
(14 items)
 
Liara
(12 items)
 
 
CPUMotherboardGraphicsGraphics
Intel Core i7-3930k MSI Big Bang - Xpower II MSI Radeon HD 7970 MSI Radeon HD 7970 
GraphicsRAMHard DriveHard Drive
MSI Radeon HD 7970 Corsair Dominator GT Intel 520 Series Intel 520 Series 
OSKeyboardPowerCase
Windows 7 Razer Blackwidow Ultimate Mass Effect 3 Edition Corsair AX1200 NZXT Switch 810 
MouseMouse Pad
Razer Imperator Mass Effect 3 Edition Razer Mass Effects 3 Vespula 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Mods
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Pre-Build Questions