Overclock.net › Forums › Intel › Intel CPUs › i7 3820 - 4820 Overclock Club
New Posts  All Forums:Forum Nav:

i7 3820 - 4820 Overclock Club - Page 172

post #1711 of 6510
Quote:
Originally Posted by HOMECINEMA-PC View Post

Do u really want to do that to that poor malay headscratch.gif Mucho volts dude I will snap some bios screens and post soon . Benching my i7 930 at the moment....thumb.gif

the highest i have actually taken it was 1.490....not all the way to 1.5, but....right now i am running 4.625 @ 1.464 idle temps of 42 C .....my house is 70 F
post #1712 of 6510
Thread Starter 
Quote:
Originally Posted by zerokool_3211 View Post

the highest i have actually taken it was 1.490....not all the way to 1.5, but....right now i am running 4.625 @ 1.464 idle temps of 42 C .....my house is 70 F

High curent settings drop vcore to 1.45 to start , raise blck or strap to get 5Ghz and start from there , Youi need good cooling bro . If u get 101 up vcore 125 drop ram speed 1600 or so and work it from there thumb.gif let me know how you go thumb.gif

post #1713 of 6510
Thread Starter 


Never bothered to do a 4.3 till now lachen.gif
post #1714 of 6510
here is what i am running right now....i dont know if this is folding stable yet....but i am having trouble getting a decent clock that is....any help would be great

post #1715 of 6510
Thread Starter 
Quote:
Originally Posted by zerokool_3211 View Post

here is what i am running right now....i dont know if this is folding stable yet....but i am having trouble getting a decent clock that is....any help would be great

Sorry i posted wrong screener have a look at this one.....

What you got is starting to look ok . Maybe you should have one profile for folding and one for 5GHZ . Look at my ai sweet mucho volts thumb.gif Now get it going and p95 it on blend 124 code dropo the ramo speed 101 code up vcore. Now if someone out there in the matrix lol disagrees with me speak now or forever hold your peace ! I dont want to give ANYONE a bum steer . Its all good thumb.gif P.S if this works for anyone rep + me pls i need input ta wink.gif
Edited by HOMECINEMA-PC - 12/14/12 at 1:45am
post #1716 of 6510
Quote:
Originally Posted by zerokool_3211 View Post

here is what i am running right now....i dont know if this is folding stable yet....but i am having trouble getting a decent clock that is....any help would be great

also this is not folding stable....really i dont even think that it is stable at all....i have gotten 2 reboots for no reason.......both of there where clock cycle blue screens i think
post #1717 of 6510
Quote:
Originally Posted by HOMECINEMA-PC View Post

Sorry i posted wrong screener have a look at this one.....
What you got is starting to look ok . Maybe you should have one profile for folding and one for 5GHZ . Look at my ai sweet mucho volts thumb.gif Now get it going and p95 it on blend 124 code dropo the ramo speed 101 code up vcore. Now if someone out there in the matrix lol disagrees with me speak now or forever hold your peace ! I dont want to give ANYONE a bum steer . Its all good thumb.gif P.S if this works for anyone rep + me pls i need input ta wink.gif

didnt you just say dont do 1.5volts, to get 5GHz?
post #1718 of 6510
lol i guess i should learn something about the codes the board is giving off.....rofl
post #1719 of 6510
Thread Starter 
Quote:
Originally Posted by zerokool_3211 View Post

lol i guess i should learn something about the codes the board is giving off.....rofl

LLC extreme will bump up your vcore under load . I ran it like that cause that malay loved it hence it helped with overall stability but not all silicon are the same so keep that in mind . Def read up on error codes very important to know wat they are to get it working and running STABLE . thumb.gif If you dont fully understand how these settings effect your attempted o/c dont bother untill you do . This will save you a lot of stress and time remember this is supposed to be FUN smile.gif
post #1720 of 6510
Quote:
Originally Posted by HOMECINEMA-PC View Post

LLC extreme will bump up your vcore under load . I ran it like that cause that malay loved it hence it helped with overall stability but not all silicon are the same so keep that in mind . Def read up on error codes very important to know wat they are to get it working and running STABLE . thumb.gif If you dont fully understand how these settings effect your attempted o/c dont bother untill you do . This will save you a lot of stress and time remember this is supposed to be FUN smile.gif

thanks for all the help....i am running llc normal on everything right now too
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › i7 3820 - 4820 Overclock Club