Overclock.net › Forums › Intel › Intel CPUs › i7 3820 - 4820 Overclock Club
New Posts  All Forums:Forum Nav:

i7 3820 - 4820 Overclock Club - Page 187

post #1861 of 6499
Thread Starter 
Quote:
Originally Posted by zerokool_3211 View Post

the stop error is about a clock cycle on a secondary process blahblah
nm....i was talking of the motherboard code....i will get the stop code net time
ok just did it....thats weird too....i primed for like 2 hours....stopped it to play planetside 2 and then started it up again and got this after like 15 minutes....rofl

101 so looks like it needs more vcore still

You would be correct thumb.gif
post #1862 of 6499
Ok... I was hitting over 80°c with my setup below (in rig)

Currently OC to 4.3ghz, with all auto voltages, DDR@1600mhz 1.505v.
vCORE @ 1.352v ~ 1.360v under load.
100mhz x43 multiplier
AUTO VOLTAGES
EXTREME LLC stuff and 130% vCapacity

This setup would EASILY break 84°c running IBT or prime95 for 5 minutes. I started reading on fans I could swap out on my Corsair H80. Apparently the stock fans are the best out there, if you ignore the dBa @ max speed. They aren't even that loud as I have 7 hd's. I decided to check all the fans and see whats what.



As you can see I had the fans setup as a push pull, except as an INTAKE!!!!!!! *** !!!!!!!!!!!!!

Temps have dropped, no word of a lie OVER 10°c, simply by changing to exhaust push/pull. Core #0 maxes at 73°c and core #2 maxes at 70°c under load. The cores only touch 73°c for a second. Average loaded temp is more like ~69-70°c.





Wow, I was about to spend $70 on fans.


Going to try full 4.5 - 4.65 ghz overclock and see how the temps are.


Im super pumped right now
Edited by theJaybo - 12/27/12 at 12:11pm
My Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-3820 asus rampage iv formula asus radeon hd7850 corsair vengeance lp 
Hard DriveHard DriveCoolingOS
intel 330 180gb ocz agility 3 corsair h80 Win7 x64 
MonitorPowerCaseMouse
samsung sb24b300 corsair hx1050 coolermaster STC-T01 zalman m300 
Mouse Pad
Corsair MM200 
  hide details  
Reply
My Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-3820 asus rampage iv formula asus radeon hd7850 corsair vengeance lp 
Hard DriveHard DriveCoolingOS
intel 330 180gb ocz agility 3 corsair h80 Win7 x64 
MonitorPowerCaseMouse
samsung sb24b300 corsair hx1050 coolermaster STC-T01 zalman m300 
Mouse Pad
Corsair MM200 
  hide details  
Reply
post #1863 of 6499
i wish that i could put my push pull back on my h100....but the 600T does not allow for that.... /sigh
post #1864 of 6499
Ok I've developed a new problem.

Im shooting for higher over clocks, but when I run furmark + prime95 she locks up almost instantly. Ive tried this at the stock 3.6ghz and she runs great.

When I say she locks up, I mean it just powers off. Almost instantly after start both tests the system just turns off. Even before temps build. I can get stable 4.5ghz in prime95, but as soon as I take a stable oc and add a 3d test at the same time, boom off she goes.

Ive read this before about "stable" overclocks becoming unstable if the cpu and graphics are stressed at the same time.

PSU is Corsair HX750 and a Asus HD7850 (running at stock speed). No power issues so far, little low on the +5v rail (4.96) but thats it. Again, Im stable at stock speeds with video tests.

Ideas ?
My Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-3820 asus rampage iv formula asus radeon hd7850 corsair vengeance lp 
Hard DriveHard DriveCoolingOS
intel 330 180gb ocz agility 3 corsair h80 Win7 x64 
MonitorPowerCaseMouse
samsung sb24b300 corsair hx1050 coolermaster STC-T01 zalman m300 
Mouse Pad
Corsair MM200 
  hide details  
Reply
My Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-3820 asus rampage iv formula asus radeon hd7850 corsair vengeance lp 
Hard DriveHard DriveCoolingOS
intel 330 180gb ocz agility 3 corsair h80 Win7 x64 
MonitorPowerCaseMouse
samsung sb24b300 corsair hx1050 coolermaster STC-T01 zalman m300 
Mouse Pad
Corsair MM200 
  hide details  
Reply
post #1865 of 6499
Thread Starter 
Quote:
Originally Posted by theJaybo View Post

Ok I've developed a new problem.
Im shooting for higher over clocks, but when I run furmark + prime95 she locks up almost instantly. Ive tried this at the stock 3.6ghz and she runs great.
When I say she locks up, I mean it just powers off. Almost instantly after start both tests the system just turns off. Even before temps build. I can get stable 4.5ghz in prime95, but as soon as I take a stable oc and add a 3d test at the same time, boom off she goes.
Ive read this before about "stable" overclocks becoming unstable if the cpu and graphics are stressed at the same time.
PSU is Corsair HX750 and a Asus HD7850 (running at stock speed). No power issues so far, little low on the +5v rail (4.96) but thats it. Again, Im stable at stock speeds with video tests.
Ideas ?

Im glad you sorted some of your temp issues tongue.gif the h80 will suck anything in...smile.gif Umm maybe a bigger psu upgrade maybe thinking.gif
post #1866 of 6499
Quote:
Originally Posted by HOMECINEMA-PC View Post

Im glad you sorted some of your temp issues tongue.gif the h80 will suck anything in...smile.gif Umm maybe a bigger psu upgrade maybe thinking.gif

I cant believe it would be a psu issue, can someone with a stable overclock greater than 4.5ghz try running prime 95, custom settings using 90% of their ram, then run passmark 3d test, or 3d mark, or something majorly graphic intensive and see if your system fails ?
My Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-3820 asus rampage iv formula asus radeon hd7850 corsair vengeance lp 
Hard DriveHard DriveCoolingOS
intel 330 180gb ocz agility 3 corsair h80 Win7 x64 
MonitorPowerCaseMouse
samsung sb24b300 corsair hx1050 coolermaster STC-T01 zalman m300 
Mouse Pad
Corsair MM200 
  hide details  
Reply
My Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-3820 asus rampage iv formula asus radeon hd7850 corsair vengeance lp 
Hard DriveHard DriveCoolingOS
intel 330 180gb ocz agility 3 corsair h80 Win7 x64 
MonitorPowerCaseMouse
samsung sb24b300 corsair hx1050 coolermaster STC-T01 zalman m300 
Mouse Pad
Corsair MM200 
  hide details  
Reply
post #1867 of 6499
Also, HomeCinema, you are using G Skill Ripjaw X ram with an X79 board.... inst the Z series made for the X79? Are you experiencing ram issues ?
My Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-3820 asus rampage iv formula asus radeon hd7850 corsair vengeance lp 
Hard DriveHard DriveCoolingOS
intel 330 180gb ocz agility 3 corsair h80 Win7 x64 
MonitorPowerCaseMouse
samsung sb24b300 corsair hx1050 coolermaster STC-T01 zalman m300 
Mouse Pad
Corsair MM200 
  hide details  
Reply
My Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-3820 asus rampage iv formula asus radeon hd7850 corsair vengeance lp 
Hard DriveHard DriveCoolingOS
intel 330 180gb ocz agility 3 corsair h80 Win7 x64 
MonitorPowerCaseMouse
samsung sb24b300 corsair hx1050 coolermaster STC-T01 zalman m300 
Mouse Pad
Corsair MM200 
  hide details  
Reply
post #1868 of 6499
Thread Starter 
If I tried to do what you suggested I rekon mine would crash too tongue.gif Ram issues not really . My first malay ran 5Ghz@2058 and xmp2133 & @ 2260 but this malay wont that's why I have it @ 1715mhz it will do xmp2133 @ lower clocks . mad.gif So I think it has something to do with the cpus , IMC = internal memory controller .
post #1869 of 6499
ok good im not crazy...

I need new ram that can clock past 1600mhz


my system is stable at 4.5ghz with a 5.0ghz fsb (125mhz strap)

Right now @ 1.424v. lowering as we speak to find stable voltage... I gave up on speed step as I want the FSB speed high, which defeats speed step.
My Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-3820 asus rampage iv formula asus radeon hd7850 corsair vengeance lp 
Hard DriveHard DriveCoolingOS
intel 330 180gb ocz agility 3 corsair h80 Win7 x64 
MonitorPowerCaseMouse
samsung sb24b300 corsair hx1050 coolermaster STC-T01 zalman m300 
Mouse Pad
Corsair MM200 
  hide details  
Reply
My Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-3820 asus rampage iv formula asus radeon hd7850 corsair vengeance lp 
Hard DriveHard DriveCoolingOS
intel 330 180gb ocz agility 3 corsair h80 Win7 x64 
MonitorPowerCaseMouse
samsung sb24b300 corsair hx1050 coolermaster STC-T01 zalman m300 
Mouse Pad
Corsair MM200 
  hide details  
Reply
post #1870 of 6499
Quote:
Originally Posted by theJaybo View Post

Also, HomeCinema, you are using G Skill Ripjaw X ram with an X79 board.... inst the Z series made for the X79? Are you experiencing ram issues ?

i was using mushkin blackline 1600 x79 quad channel kit and just replaced with 2 kits of g.skill sniper 2133 and am running it at 2000 10-11-10-28 and i am trying get 4.625 stable right now....priming as we speak...and the only bsod i am getting is 101 everytime so keep upping the vcore...rofl....i am at 1.420 right now llc extreme 1.472 unload load and max temp now of 86 average is 79 so this might be good



also i could never get the black line past like 1750 without horrible timings
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › i7 3820 - 4820 Overclock Club