Overclock.net › Forums › Intel › Intel CPUs › i7 3820 - 4820 Overclock Club
New Posts  All Forums:Forum Nav:

i7 3820 - 4820 Overclock Club - Page 246

post #2451 of 6491
Hi all!

Gonna jump back in this thread since I decided to get off meh bottom, and see what this thing can do.

Does anyone else have trouble getting past 4.8ghz? I can get in and run fire strike at 4.8 and 1.4v but, I just get stuck at win7 loading screen at greater than 4.8, even with a 1.43 vcore.

My other voltages:

Vtt 1.2
Vcc 1.2
Dram 1.515
Pll 1.9
Llc extreme

Any tips are appreciated, thanks in advance!
post #2452 of 6491
Quote:
Originally Posted by Rmerwede View Post

Hi all!

Gonna jump back in this thread since I decided to get off meh bottom, and see what this thing can do.

Does anyone else have trouble getting past 4.8ghz? I can get in and run fire strike at 4.8 and 1.4v but, I just get stuck at win7 loading screen at greater than 4.8, even with a 1.43 vcore.

My other voltages:

Vtt 1.2
Vcc 1.2
Dram 1.515
Pll 1.9
Llc extreme

Any tips are appreciated, thanks in advance!


could just be your chip...i need like 1.45 or 1.46 do do 4.8 or higher
post #2453 of 6491
Vtt 1.2
Vcc 1.2
Dram 1.515
Pll 1.9
Llc extreme


That's a lot of voltage and serious LLC. You shouldn't need 1.2 vcc and your vtt is on the high side. I only use 1.2 vtt/vccsa because I run quad gpu. Your LLC is way over the top and PLL is needlessly high. X79 doesn't need as much PLL.

You should try running low volts on the secondary voltages?

Vtt 1.15
Vcc 1.05
Pll 1.6-1.7
Llc high
The 3930
(26 items)
 
Junior's 3930
(22 items)
 
DATA/HTPC
(20 items)
 
  hide details  
Reply
The 3930
(26 items)
 
Junior's 3930
(22 items)
 
DATA/HTPC
(20 items)
 
  hide details  
Reply
post #2454 of 6491
i could prolly back my other voltages off as well....lol...i been checking out madmans screenshots too long.....rofl
post #2455 of 6491
Woot... New wc system up and running.
Current room ambient 26.5c
Current water temp 28.4c
Current cpu temp@idle 32.6c

Have not gotten a chance to load it all up yet due to fresh installing win7.

Oh and i didnt even put on fresh cpu tim. When i removed the 620 most of the tim stayed on the cpu. Looked like a good amount left on so just dropped the 380i ontop. Lol.
Cant wait to try the Indigo Extreme
Edited by Wookieelover - 2/7/13 at 8:44pm
Black Betty
(0 items)
  
Reply
Black Betty
(0 items)
  
Reply
post #2456 of 6491
Same overclock as before.
4.6ghz @ 1.36v
Idles @ 35c
Watertemp @ 30c
IBT max load temp @ 58c

Down 15c @ max load from the modified 620 system. Still using old 620 tim.

Time to crank up the volts and the clock again.
Black Betty
(0 items)
  
Reply
Black Betty
(0 items)
  
Reply
post #2457 of 6491
Thread Starter 
Quote:
Originally Posted by LayerCakes View Post


Here's that ghetto test bench tongue.gif
And the rig works again! Wooo!
Now put it back into your ruby case and show me some temp improvements thumb.gif
Quote:
Originally Posted by zerokool_3211 View Post

i could prolly back my other voltages off as well....lol...i been checking out madmans screenshots too long.....rofl
My screeners are the bomb cause they have had over 1800 views eek.gif
Quote:
Originally Posted by tsm106 View Post

Vtt 1.2
Vcc 1.2
Dram 1.515
Pll 1.9
Llc extreme
That's a lot of voltage and serious LLC. You shouldn't need 1.2 vcc and your vtt is on the high side. I only use 1.2 vtt/vccsa because I run quad gpu. Your LLC is way over the top and PLL is needlessly high. X79 doesn't need as much PLL.
You should try running low volts on the secondary voltages?
Vtt 1.15
Vcc 1.05
Pll 1.6-1.7
Llc high
I am guilty on running high volts cause that's what I do tongue.gif
Quote:
Originally Posted by Wookieelover View Post

Woot... New wc system up and running.
Current room ambient 26.5c
Current water temp 28.4c
Current cpu temp@idle 32.6c
Have not gotten a chance to load it all up yet due to fresh installing win7.
Oh and i didnt even put on fresh cpu tim. When i removed the 620 most of the tim stayed on the cpu. Looked like a good amount left on so just dropped the 380i ontop. Lol.
Cant wait to try the Indigo Extreme
Looks mad and there is nothing wrong with your loop , after looking at mine laughingsmiley.gif
post #2458 of 6491
Just did a quick nasty OC before work.
5ghz @ 1.41
Max temp was 67c

Passed IBT but failed prime95 :-(
Black Betty
(0 items)
  
Reply
Black Betty
(0 items)
  
Reply
post #2459 of 6491
Thread Starter 
Okay been stuffin around with o/c'n the ram trying out different clocks and timings.........

4755@2335@1.375vcore 10-12-10 28 1T Cool temps cool.gif Gonna let this prime for awhile longer.......Might run it as my daily thinking.gif

@ Wookielover MOAR VOLTS bro thumb.gif
post #2460 of 6491
Yeah i know. Sucks being at work and i cant flog my overclock.
Gonna try 1.42v @ 5ghz.
Black Betty
(0 items)
  
Reply
Black Betty
(0 items)
  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › i7 3820 - 4820 Overclock Club