Originally Posted by mtbiker033
What are your settings at 4.8?
I left off here a few days ago before I started messing around with mem tweakit! I think I posted this somewhere already?
ignore those memory timings there
this is a 47x multi with a (+).125 offset... no strap or bclk tampering. I like it here... I have got this particular setting down to a solid 1.280v in cpuz but hwmon reports it at 1.29v or 1.30v, I saved those settings to a quick bios file on a usb along with some other bios.
at 4.875ghz to 4.9ghz I pull a solid 1.45v to 1.47v respectively... that's with a 125 strap though which for some reason I just don't like much because this multiplier is unlocked... I may mess around with the 125 a little more tonight and see where I can go with it.
Originally Posted by Yurimonster
Vcore - 1.38
VID - about 1.25
Would I be wanting a higher or lower VID for this? I Confess I did not spend to much time trying to get the lowest Voltage I needed.
mine is usually at less than or equal to 1.21, I have never seen it go higher than 1.22 and that was pulling something sick like 1.576v above 4.9ghz on a 100 strap... you may want to ask around about that or someone may chime in on it? you can see from the image my VID here has a min of 0.821
if my VCCSA goes up to 1.1 playing around with memory or taking it to 2400mhz on my kit, my VID always ends up at 1.21 without a swing down.Edited by Butter Chicken - 10/4/13 at 1:55pm