[Sponsored] (Completed) Mass Effect 3 - NZXT Switch 810 Build Log (Sponsored) - Page 29

Thanks guys. Will probably be doing some more work to that res holder later before polishing it .Maby some cut in grooves or something .

"UPDATE"

Really had trouble posting this update do to confusing people or people getting the wrong idea. Please use the only as a Reference shot only.I am only showing the reservoir mounting and pump mounting in this picture.Everything is just sitting in place.The 5.25 bays are going to be totally reworked still. The reservoirs are just stiffing there with a Bungie holding them balanced for measurements.The inside of the Case will be painted and don't to match the final theme and tons tons more.Also i had to remove the Fans for this shot do to NDA i am under on them and please don't ask anything about them because i cannot answer.

I am just posting this to let you guys see this build goes together and apart roughly every day to do more work to the case and is far far from completed. Hope you enjoy the pictures.And take them for what they are Just a Reference point of the build:

Once i receive the PSU for the build it will start really coming together.Allot of measurements are needed from the PSU and whats being done to it before i go can really get moving on the project.

Here the Reference only Shots are: (So you guys can see Progress has been being Made:










And in case you missed it before .The home made Reservoir brackets . Also not complete, might do a design patter on them and still need to polish them to match the Nickel.

Before:






After:







Also the 2 EK-DCP 4.0 (12V DC Pump's) which are 800L / hour are mounted in this cage hard lined right to the Reservoirs. But like i said still tons of work to do with the Cages,They will look nothing like they do now and will have great airflow through them also when finished.

As usual i forgot to take a Photo after i cut it and Put the pumps in but i will edit this post when i have them back out again soon or will add it to a new update since so much is going to be done to the 5.25 trays anyway.But i did mark out where i cut it so far to fit the 2 pumps.




And also i would like to Thank EK for Sponsoring the Pumps,Brackets and basically both the dual loop setups for this build.Along with some swag also like cup holder full sleeve shirt and some other great stuff. Great company and they also have allot into this build.

Here are a Link to the Pumps and the brackets Plus the Specs of the Pumps:Also a shot of me Proudly Sporting the shirt they gave me. Even though i am way overtired in the picture and look like hell.I will post it.

2 EK-DCP 4.0 (12V DC Pump's)

Model: EK-DCP 4.0
Rated voltage: DC12V +/-10%
Starting voltage: DC 8V above
Power Consumption: 18W +/-10%
Load current: 1.8A +/-10%
Q-max: 800 L/hr +/-10%
H-max.: 4m +/-10%
Size: 75 x 54 x 66mm
Life Expectancy: 50000/hrs at 25°
Noise: 24.5 dB
Weight: 670g

Enclosed:
1 × EK-DCP Pump
1 x Anti-vibration Pad
1 x 3pin to 4pin Cord
2x Brackets

Link to them here: http://www.ekwaterblocks.com/shop/pumps-and-accessories/pumps/ek-dcp-4-0-12v-dc-pump.html

And me looking horrible. but still Sporting there Shirt to show my appreciation towards them.I wear all my Sponsors Shirts and you will most likely see all of them by the end of the build,Actually i think this is the first Photo of me without a Respirator on or hiding myself :




Lol sorry i look so Terrible. but oh well i shared it with you guys anyway:


And of Course more "UPDATE's" very Soon!




RETURN TO INDEX!
Edited by mybadomen - 4/4/12 at 5:58pm

Very good Possibility soon but i am not an artisan here yet and we are in the Middle of building a new CNC Milling Machine that will do plasma cutting, Milling,and tons of other cool stuff.Its a scratch build and we are just going to run it off Mach 3 for the moment. Neither me or my Friend are great at Machining we just screw around at the moment but we are putting a ton of effort into this new CNC scratch build.At the moment like i said i am not an artisan and cant sell on here plus have a deadline that is not far from now to get the Mass Effect 3 build done but after that eventually we do have some plans in the works.But wont be doing any work that competes with my sponsors out of my appreciation for there help not only on this build but with advice and just the support in general from them.

Hope that answers your question. I tried to do my best at answering it.

Take care PCModderMike and thanks for the Compliment!


MybadOmen

I will mate. My Buddie is freaking out rushing trying to get this CNC together with my help and i am rushing getting my PC together . I will be there all weekend working on my build and helping him out with the CNC at the same time.It will be a pretty awesome machine when its done.Will draw designs cut windows do lettering all kinds of stuff.But first we need to get it build.He is the brains behind that CNC though i take no credit besides helping him build it and i built the PC to run it which is very basic XP machine for now unless something else is needed in the future.

He is building something like this but allot bigger and allot stronger for doing everything from metals to Acrylics and to also hold his Plasma Cutter.He also is using a Step motor for the Cutting motor also so he will have full control of every axis and the speeds and will do basically anything.I will definitely be Posting Pictures of that when its finished.Its amazing. Also i went to school for a couple years in Machine shop plus used a Bridgeport / lathe many times. But this guy taught me more in this last year then i ever learned before.Only down side is he works so much and i dont get to get over to often Plus i still love Modding with Dremel's etc anyway it makes it more fun. I only use the machine shop tools if i have no other way of cutting something.Like 1/2 inch Aluminum. really needed the big band saw and the Bridge port for that.And now i will finish it up here.

Lol sorry got to blabbing Take care:

Here is Sorta what we are building but on a much larger scale: