Overclock.net › Forums › Cooling › Water Cooling › Putting a 3x120mm rad in a Thermaltake armor + full tower
New Posts  All Forums:Forum Nav:

Putting a 3x120mm rad in a Thermaltake armor + full tower

post #1 of 2
Thread Starter 
I am aware that I could buy special parts that would allow me to mount the rad on the outside, but I would prefer to mount it on the inside and I just wanted to know if any one had, and if so, could they post a few pics and give me some advice. The case is a Thermaltake VH6000BWS.
Thanks
post #2 of 2
Thread Starter 
Due to the fact that no one ever commented, I'm guessing this is an uncommon case, or most people choose to mount a radiator differently. What I did was I moved to HDD and SSD to a dual 5.25 bay Vantec HDCS. Then I removed the HDD cage and all of the various parts that it attached to. Tomorrow I am coming to drill holes and cut slots into the new open space to make is resemble the 2 120mm fan slots that come cut into the case. I know a lot of words make things more confusing, so whenever I am done with it, I will take a pic and upload it.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Putting a 3x120mm rad in a Thermaltake armor + full tower