Overclock.net › Forums › Overclockers Care › Overclock.net Folding@Home Team › 2600k - need help with high TPF
New Posts  All Forums:Forum Nav:

2600k - need help with high TPF

post #1 of 13
Thread Starter 
So i have my 2600k at 5.1ghz and my ram at 1866 CL9. Currently im working a 6098 and my TPF is 07:10-07:30. I;ve read of people using 2500k's at lower clock speeds getting better TPFs, any advice or suggestions? (biostar tz68a+rch mobo)

Sorry i can't post any HFM pics as i can't get it to work lol.
Rising Sun
(19 items)
 
  
CPUMotherboardGraphicsGraphics
|i5 2500k 4.8ghz @1.335v| |Asrock Fatal1ty P67 Professional| |XFX 6990| |XFX 6950 unlocked to 6970| 
RAMHard DriveHard DriveOptical Drive
|Samsung DDR3 4x4GB 2133 10-10-10-28-1t| |Crucial 64GB M4 SSD x 2| |Samsung 830 128GB| |Lite-On 4x Blu Ray| 
CoolingCoolingCoolingOS
|Koolance CPU 370| |Koolance VID-AR699| |Koolance VID-AR697| |Win 7 64bit Pro| 
MonitorKeyboardPowerCase
|U2711| |2x KBC Pokers MX Red| |Cooler Master Silent Pro Gold 1200w| |NZXT Phantom 820| 
MouseMouse PadAudio
|Mionix Naos 5000| |Artisan Hien M Hard Red| |X-Fi Fatal1ty Titanium| 
  hide details  
Reply
Rising Sun
(19 items)
 
  
CPUMotherboardGraphicsGraphics
|i5 2500k 4.8ghz @1.335v| |Asrock Fatal1ty P67 Professional| |XFX 6990| |XFX 6950 unlocked to 6970| 
RAMHard DriveHard DriveOptical Drive
|Samsung DDR3 4x4GB 2133 10-10-10-28-1t| |Crucial 64GB M4 SSD x 2| |Samsung 830 128GB| |Lite-On 4x Blu Ray| 
CoolingCoolingCoolingOS
|Koolance CPU 370| |Koolance VID-AR699| |Koolance VID-AR697| |Win 7 64bit Pro| 
MonitorKeyboardPowerCase
|U2711| |2x KBC Pokers MX Red| |Cooler Master Silent Pro Gold 1200w| |NZXT Phantom 820| 
MouseMouse PadAudio
|Mionix Naos 5000| |Artisan Hien M Hard Red| |X-Fi Fatal1ty Titanium| 
  hide details  
Reply
post #2 of 13
Try using "prtscr" to take screen shots a nice little program that allows you to crop the screen shot while taking it.


As for you TPF I dont think that is all to bad. At 7:10 you are still getting about 29k ppd, which is the measurement you should pay closer attention to. TPF can very drastically across WUs. on my 2500k it can be anywhere from 3 minutes to 30 minutes depending on what it is currently working on.

I think you are right in the ballpark for that CPU. Checked but I have never received one so I could not tell you if that is a bad WU or not that does not net the same points as others
post #3 of 13
I wanna say that your TTF sounds about right if you're folding inside windows. Are you running them on your HT threads?

6098 is a big WU. If I close everything down(Firefox stream, etc..) my TTF on that WU folding in windows it's around 17 minutes for me running my Phenom II at a mild OC of only 3.8Ghz. I have seen these on my Linux servers and on my 4 core machines it's around 12-14 minutes minutes form what I recall and on the 2 core Linux ones, it's as high as 20-24 minutes.

In short, it's one of those massive WU'.... just wait till you get 10127 devil-smiley-019.gif
Edited by Agent_kenshin - 3/1/12 at 8:00pm
post #4 of 13
Quote:
Originally Posted by Agent_kenshin View Post

I wanna say that your TTF sounds about right if you're folding inside windows. Are you running them on your HT threads?
6098 is a big WU. If I close everything down(Firefox stream, etc..) my TTF on that WU folding in windows it's around 17 minutes for me running my Phenom II at a mild OC of only 3.8Ghz. I have seen these on my Linux servers and on my 4 core machines it's around 12-14 minutes minutes form what I recall and on the 2 core Linux ones, it's as high as 20-24 minutes.
In short, it's one of those massive WU'.... just wait till you get 10127 devil-smiley-019.gif

Haha touche! I have indeed folded them (dont know why I am so happy about finding out) I have folded them on a 2core and 4 core HPCS linux instance. They had a TPF of 7:33 and 15:02 respectively. After looking at this I would say that this is totally normal if this is not a dedicated linux folding setup we are talking about
post #5 of 13
Thread Starter 
im folding natively on ubuntu 10.10, and its a dedicated folding rig so nothing else is running, and i dont use it for web surfing etc. as i said, i talked to someone running a 2500k at 4.8 getting the same TPF on a 6098. I would think with HY and 300 extra MHZ id be in the low 6minute area.

And 29K ppd is good for a 2600k? I think stock 2600ks get more than that lol
Rising Sun
(19 items)
 
  
CPUMotherboardGraphicsGraphics
|i5 2500k 4.8ghz @1.335v| |Asrock Fatal1ty P67 Professional| |XFX 6990| |XFX 6950 unlocked to 6970| 
RAMHard DriveHard DriveOptical Drive
|Samsung DDR3 4x4GB 2133 10-10-10-28-1t| |Crucial 64GB M4 SSD x 2| |Samsung 830 128GB| |Lite-On 4x Blu Ray| 
CoolingCoolingCoolingOS
|Koolance CPU 370| |Koolance VID-AR699| |Koolance VID-AR697| |Win 7 64bit Pro| 
MonitorKeyboardPowerCase
|U2711| |2x KBC Pokers MX Red| |Cooler Master Silent Pro Gold 1200w| |NZXT Phantom 820| 
MouseMouse PadAudio
|Mionix Naos 5000| |Artisan Hien M Hard Red| |X-Fi Fatal1ty Titanium| 
  hide details  
Reply
Rising Sun
(19 items)
 
  
CPUMotherboardGraphicsGraphics
|i5 2500k 4.8ghz @1.335v| |Asrock Fatal1ty P67 Professional| |XFX 6990| |XFX 6950 unlocked to 6970| 
RAMHard DriveHard DriveOptical Drive
|Samsung DDR3 4x4GB 2133 10-10-10-28-1t| |Crucial 64GB M4 SSD x 2| |Samsung 830 128GB| |Lite-On 4x Blu Ray| 
CoolingCoolingCoolingOS
|Koolance CPU 370| |Koolance VID-AR699| |Koolance VID-AR697| |Win 7 64bit Pro| 
MonitorKeyboardPowerCase
|U2711| |2x KBC Pokers MX Red| |Cooler Master Silent Pro Gold 1200w| |NZXT Phantom 820| 
MouseMouse PadAudio
|Mionix Naos 5000| |Artisan Hien M Hard Red| |X-Fi Fatal1ty Titanium| 
  hide details  
Reply
post #6 of 13
Stock 2600ks do not get even close to 29K, but still that TPF is high for that WU and your settings. I get around that TPF or a little less in a VM at 4.6GHz with a GPU folding as well so at 5.1GHz with no GPU folding and native linux you should be looking at 40K or higher. Are you sure the fah client got set up correctly? For example are you using all 8 threads?
Main Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2700k ASUS P8P67 WS Revolution EVGA 980 Ti SC+ Samsung 4x4GB DDR3 1866MHz 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Evo 1TB Samsung Spinpoint F4 2TB Samsung BD Combo Noctua NH-D14 
OSMonitorPowerCase
Windows 10 64 bit Asus PG279Q Kingwin Lazer Platinum 1000W Silverstone Raven RV03 
  hide details  
Reply
Main Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2700k ASUS P8P67 WS Revolution EVGA 980 Ti SC+ Samsung 4x4GB DDR3 1866MHz 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Evo 1TB Samsung Spinpoint F4 2TB Samsung BD Combo Noctua NH-D14 
OSMonitorPowerCase
Windows 10 64 bit Asus PG279Q Kingwin Lazer Platinum 1000W Silverstone Raven RV03 
  hide details  
Reply
post #7 of 13
Thread Starter 
i followed digigami's set up to the T (aside from the langouste part). and i do see "starting 10 threads" in the terminal, so im assuming that means they are all running.
Rising Sun
(19 items)
 
  
CPUMotherboardGraphicsGraphics
|i5 2500k 4.8ghz @1.335v| |Asrock Fatal1ty P67 Professional| |XFX 6990| |XFX 6950 unlocked to 6970| 
RAMHard DriveHard DriveOptical Drive
|Samsung DDR3 4x4GB 2133 10-10-10-28-1t| |Crucial 64GB M4 SSD x 2| |Samsung 830 128GB| |Lite-On 4x Blu Ray| 
CoolingCoolingCoolingOS
|Koolance CPU 370| |Koolance VID-AR699| |Koolance VID-AR697| |Win 7 64bit Pro| 
MonitorKeyboardPowerCase
|U2711| |2x KBC Pokers MX Red| |Cooler Master Silent Pro Gold 1200w| |NZXT Phantom 820| 
MouseMouse PadAudio
|Mionix Naos 5000| |Artisan Hien M Hard Red| |X-Fi Fatal1ty Titanium| 
  hide details  
Reply
Rising Sun
(19 items)
 
  
CPUMotherboardGraphicsGraphics
|i5 2500k 4.8ghz @1.335v| |Asrock Fatal1ty P67 Professional| |XFX 6990| |XFX 6950 unlocked to 6970| 
RAMHard DriveHard DriveOptical Drive
|Samsung DDR3 4x4GB 2133 10-10-10-28-1t| |Crucial 64GB M4 SSD x 2| |Samsung 830 128GB| |Lite-On 4x Blu Ray| 
CoolingCoolingCoolingOS
|Koolance CPU 370| |Koolance VID-AR699| |Koolance VID-AR697| |Win 7 64bit Pro| 
MonitorKeyboardPowerCase
|U2711| |2x KBC Pokers MX Red| |Cooler Master Silent Pro Gold 1200w| |NZXT Phantom 820| 
MouseMouse PadAudio
|Mionix Naos 5000| |Artisan Hien M Hard Red| |X-Fi Fatal1ty Titanium| 
  hide details  
Reply
post #8 of 13
Find a way to see the current CPU usage, I think it's -top but I'm not sure because I'm not very experienced with Linux.
Main Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2700k ASUS P8P67 WS Revolution EVGA 980 Ti SC+ Samsung 4x4GB DDR3 1866MHz 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Evo 1TB Samsung Spinpoint F4 2TB Samsung BD Combo Noctua NH-D14 
OSMonitorPowerCase
Windows 10 64 bit Asus PG279Q Kingwin Lazer Platinum 1000W Silverstone Raven RV03 
  hide details  
Reply
Main Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2700k ASUS P8P67 WS Revolution EVGA 980 Ti SC+ Samsung 4x4GB DDR3 1866MHz 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Evo 1TB Samsung Spinpoint F4 2TB Samsung BD Combo Noctua NH-D14 
OSMonitorPowerCase
Windows 10 64 bit Asus PG279Q Kingwin Lazer Platinum 1000W Silverstone Raven RV03 
  hide details  
Reply
post #9 of 13
Thread Starter 
cat /proc/cpuinfo shows all 8 threads at 5100.1
Rising Sun
(19 items)
 
  
CPUMotherboardGraphicsGraphics
|i5 2500k 4.8ghz @1.335v| |Asrock Fatal1ty P67 Professional| |XFX 6990| |XFX 6950 unlocked to 6970| 
RAMHard DriveHard DriveOptical Drive
|Samsung DDR3 4x4GB 2133 10-10-10-28-1t| |Crucial 64GB M4 SSD x 2| |Samsung 830 128GB| |Lite-On 4x Blu Ray| 
CoolingCoolingCoolingOS
|Koolance CPU 370| |Koolance VID-AR699| |Koolance VID-AR697| |Win 7 64bit Pro| 
MonitorKeyboardPowerCase
|U2711| |2x KBC Pokers MX Red| |Cooler Master Silent Pro Gold 1200w| |NZXT Phantom 820| 
MouseMouse PadAudio
|Mionix Naos 5000| |Artisan Hien M Hard Red| |X-Fi Fatal1ty Titanium| 
  hide details  
Reply
Rising Sun
(19 items)
 
  
CPUMotherboardGraphicsGraphics
|i5 2500k 4.8ghz @1.335v| |Asrock Fatal1ty P67 Professional| |XFX 6990| |XFX 6950 unlocked to 6970| 
RAMHard DriveHard DriveOptical Drive
|Samsung DDR3 4x4GB 2133 10-10-10-28-1t| |Crucial 64GB M4 SSD x 2| |Samsung 830 128GB| |Lite-On 4x Blu Ray| 
CoolingCoolingCoolingOS
|Koolance CPU 370| |Koolance VID-AR699| |Koolance VID-AR697| |Win 7 64bit Pro| 
MonitorKeyboardPowerCase
|U2711| |2x KBC Pokers MX Red| |Cooler Master Silent Pro Gold 1200w| |NZXT Phantom 820| 
MouseMouse PadAudio
|Mionix Naos 5000| |Artisan Hien M Hard Red| |X-Fi Fatal1ty Titanium| 
  hide details  
Reply
post #10 of 13
I meant in terms of percent, I believe that -top is the correct command and you should see 800% in the fah process. EDIT: it's apparently just top not -top
Edited by juano - 3/1/12 at 10:35pm
Main Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2700k ASUS P8P67 WS Revolution EVGA 980 Ti SC+ Samsung 4x4GB DDR3 1866MHz 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Evo 1TB Samsung Spinpoint F4 2TB Samsung BD Combo Noctua NH-D14 
OSMonitorPowerCase
Windows 10 64 bit Asus PG279Q Kingwin Lazer Platinum 1000W Silverstone Raven RV03 
  hide details  
Reply
Main Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2700k ASUS P8P67 WS Revolution EVGA 980 Ti SC+ Samsung 4x4GB DDR3 1866MHz 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Evo 1TB Samsung Spinpoint F4 2TB Samsung BD Combo Noctua NH-D14 
OSMonitorPowerCase
Windows 10 64 bit Asus PG279Q Kingwin Lazer Platinum 1000W Silverstone Raven RV03 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Overclock.net Folding@Home Team
Overclock.net › Forums › Overclockers Care › Overclock.net Folding@Home Team › 2600k - need help with high TPF