post #1 of 1
Thread Starter 
Ok i got everything under control. Except one more thing.

Im mounting up my black ice GTX480 on the bottom of my case, and ive noticed when I put the power supply (the one in the picture is a temporary one) in that it blocks the rear quarter of the radiator (see below). There is about a 5mm clearance, too little ? Im using Ultra Kaze 3000s, so If I use regular sized fans I can get an extra 13mm clearance - stick with it or which 25mm thick high pressure fans to get instead ?

I should add that the fans are pulling out of the case.

kqGHs.jpg