Overclock.net › Forums › Intel › Intel CPUs › Help me reach the 4.5/4.6 on i2600k p8p67 pro
New Posts  All Forums:Forum Nav:

Help me reach the 4.5/4.6 on i2600k p8p67 pro

post #1 of 5
Thread Starter 
hi, im trying to pass the 4.4 ghz stable 24/7 oc, but im getting 101 or 124 bsod.

My settings for 4.4ghz

im on p8p67 pro, ripjaws x 2x4gb

ai overclock xmp
bclk/pci 100
turbo ratio all cores 44
internal pll auto
memory ddr3-1600
cpu power saving disabled
load line calibration ultra high
vrm frecuency manual 350
phase standard
duty t.probe
cpu current capability 100%
cpu voltage manual 1.32
dram 1.50
vccsa auto
vccio auto
cpu pll auto
pcm voltage auto
cpu spectrum disabled

cpu ratio auto
intel adaptative enabled
ht enabled
active processor cores all
cpuid maximun disabled
disable bit enable
intel virtualization enable
intel speedstep enable
turbo mode enable
c1e enable
c3 disable
c6 disable


im using corsair H70.

I want 4.5 or 4.6 for 24/7.

Give me some light, i tryied 1.33 with 4.5ghz and received a black screen, force restart and bsod 101 when boot again.
Edited by kazama - 3/3/12 at 8:47am
post #2 of 5
What speed are you running those ripjaws at?

With that much ram, set

VCCIO TO 1.1V

Also, on that board,

Set CPU PLL to 1.78V

Raise CPU Current Capability to 110

Disable Internal PLL if under 4.6Ghz, enable if above that.

Could not get that board to work well at all with the Auto Setting.

Also, since you are using speed step, you will need to raise the Vcore. Turn that off and you may not have to.
Edited by Electroneng - 3/3/12 at 8:03am
The Machine
(14 items)
 
  
CPUMotherboardGraphicsRAM
I7-3930K @ 4.7Ghz 1.34v ASUS X79 Sabertooth  MSI GTX 780 G-Skill Snipers 1900 mhz 16gb 
Hard DriveOptical DriveCoolingOS
Crucial M4 64Gb boot, WD Caviar Black 1TB LG Blue-ray Noctua NH-D14 2011(Yate Loon -P14-Yate Loon) Windows 7 Ultimate 64bit 
MonitorPowerCase
Acer HN274H 1080P 120Hz Corsair HX850 CM HAF 912 (Modded) 
  hide details  
Reply
The Machine
(14 items)
 
  
CPUMotherboardGraphicsRAM
I7-3930K @ 4.7Ghz 1.34v ASUS X79 Sabertooth  MSI GTX 780 G-Skill Snipers 1900 mhz 16gb 
Hard DriveOptical DriveCoolingOS
Crucial M4 64Gb boot, WD Caviar Black 1TB LG Blue-ray Noctua NH-D14 2011(Yate Loon -P14-Yate Loon) Windows 7 Ultimate 64bit 
MonitorPowerCase
Acer HN274H 1080P 120Hz Corsair HX850 CM HAF 912 (Modded) 
  hide details  
Reply
post #3 of 5
Thread Starter 
The ram is running stock 1600, xmp profile 8-8-8-24-2N 1.5v

Settings to your values, and the vcore with offset? which value?

im testing your values with offset, cpuz says 1.392-1.40-1.4008 most of the times, seems to be a high vcore, in manual 4.4 is 1.32, and seems totally stable.

100 passes linx 0.64 all memory.
Edited by kazama - 3/3/12 at 9:38am
post #4 of 5
I do not use offset settings with Vcore. I always put in manual voltage settings. I would set Vcore to 1.35V and I would drop the Load line calibration rating one notch.

Keep VCCIO at or slightly above 1.1V with 8GB of ram!
Edited by Electroneng - 3/3/12 at 11:14am
The Machine
(14 items)
 
  
CPUMotherboardGraphicsRAM
I7-3930K @ 4.7Ghz 1.34v ASUS X79 Sabertooth  MSI GTX 780 G-Skill Snipers 1900 mhz 16gb 
Hard DriveOptical DriveCoolingOS
Crucial M4 64Gb boot, WD Caviar Black 1TB LG Blue-ray Noctua NH-D14 2011(Yate Loon -P14-Yate Loon) Windows 7 Ultimate 64bit 
MonitorPowerCase
Acer HN274H 1080P 120Hz Corsair HX850 CM HAF 912 (Modded) 
  hide details  
Reply
The Machine
(14 items)
 
  
CPUMotherboardGraphicsRAM
I7-3930K @ 4.7Ghz 1.34v ASUS X79 Sabertooth  MSI GTX 780 G-Skill Snipers 1900 mhz 16gb 
Hard DriveOptical DriveCoolingOS
Crucial M4 64Gb boot, WD Caviar Black 1TB LG Blue-ray Noctua NH-D14 2011(Yate Loon -P14-Yate Loon) Windows 7 Ultimate 64bit 
MonitorPowerCase
Acer HN274H 1080P 120Hz Corsair HX850 CM HAF 912 (Modded) 
  hide details  
Reply
post #5 of 5
You running 8gb ..most of your bios settings are right on
-as mention rise your VCCIO 1.1~1.11875v and Dram voltage to 1.55v (or just run 1333- default until you establish your OC)
-don't change CPU PLL ,leave it on AUTO
-you can try to change phase /duty to Extreme -see if that makes the difference ..(you most likely don't have to)
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Help me reach the 4.5/4.6 on i2600k p8p67 pro