Overclock.net › Forums › AMD › AMD - General › OC Danger!!!?
New Posts  All Forums:Forum Nav:

OC Danger!!!?

post #1 of 31
Thread Starter 
Now continuing my 1st time overclocking attempt my AMD64 3800+ (single core) was at 2.71Ghz which was my limit to a stable overclock. Tried 2.75Ghz and it was running my Corsair Value ram a touch higher than it should and caused lock ups as soon as windows loaded up. Now after reading further in the art of overclocking i thought yes my ram will limit my OC, but is it this so early on into my adventure?

I thought my CPU voltage could be to blame, so i jumped into the Bios and put the CPU voltage up one notch (i'm not an idiot i was very cautious about this). But i made sure i could keep my HTT at a reasonable level of 980 and keep my ram from going beyond it's capabilities.

Everything is as it was, ram at 333Mhz rather than stock 400Mhz, except i changed the multiplier on the CPU to 11.5 and CPU frequency down a bit to
245Mhz and HT to X4 obviously. And oddly enough it booted into windows without a lockup or BSOD. Now remember i put the voltage up one notch!

I am now running my AMD64 3800+ @2.82Ghz, although streess testing must be done before i am happy...brb
 
X79 Build
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7-6950X @ 4.0Ghz Asus Rampage V Extreme [Bios:3101] 2x EVGA GeForce Titan X SC Editions in SLI 32GB (4×8) Corsair Dominator Platinums (3000Mhz) 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 950 Pro 512GB M.2 Nvme 2x 256GB Vertex 4 SSD (RAID-0) 2x 2TB Seagate Barracuda [Storage] Pioneer BDR-207DBK Blu-ray Writer 
CoolingOSMonitorPower
Corsair H105 (Push/Pull) Windows 10 Pro x64 2x 27" Asus PG278Q ROG Swift 144hz  Corsair AX1500i Digital ATX 80 Plus Titanium 
CaseAudio
Lian Li PC-O8WX ATX Cube Case Logitech Z906 5.1 Surround 
CPUMotherboardGraphicsRAM
i7-3930K (C2) @ (4.6Ghz) Asus Rampage IV Extreme X79 (Bios 3204) 3x EVGA GTX780Ti's SC Editions 32GB (4x8GB) G-Skill TridentX 2400Mhz 
Hard DriveHard DriveOptical DriveCooling
2x 256GB OCZ Vertex 4's (RAID-0) 2x 2TB Seagate Barracuda 7200.14 64MB Cache Pioneer BDR-207DBK Blu-ray Writer Corsair H105 (Push/Pull) 
OSMonitorPowerCase
Win7 Pro 64Bit & Win10 Pro 64Bit Asus ROG Swift (2560x1440 @144hz) Corsair AX1200 + Corsair RED sleeved cables Coolermaster Cosmos II Ultra 
  hide details  
Reply
 
X79 Build
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7-6950X @ 4.0Ghz Asus Rampage V Extreme [Bios:3101] 2x EVGA GeForce Titan X SC Editions in SLI 32GB (4×8) Corsair Dominator Platinums (3000Mhz) 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 950 Pro 512GB M.2 Nvme 2x 256GB Vertex 4 SSD (RAID-0) 2x 2TB Seagate Barracuda [Storage] Pioneer BDR-207DBK Blu-ray Writer 
CoolingOSMonitorPower
Corsair H105 (Push/Pull) Windows 10 Pro x64 2x 27" Asus PG278Q ROG Swift 144hz  Corsair AX1500i Digital ATX 80 Plus Titanium 
CaseAudio
Lian Li PC-O8WX ATX Cube Case Logitech Z906 5.1 Surround 
CPUMotherboardGraphicsRAM
i7-3930K (C2) @ (4.6Ghz) Asus Rampage IV Extreme X79 (Bios 3204) 3x EVGA GTX780Ti's SC Editions 32GB (4x8GB) G-Skill TridentX 2400Mhz 
Hard DriveHard DriveOptical DriveCooling
2x 256GB OCZ Vertex 4's (RAID-0) 2x 2TB Seagate Barracuda 7200.14 64MB Cache Pioneer BDR-207DBK Blu-ray Writer Corsair H105 (Push/Pull) 
OSMonitorPowerCase
Win7 Pro 64Bit & Win10 Pro 64Bit Asus ROG Swift (2560x1440 @144hz) Corsair AX1200 + Corsair RED sleeved cables Coolermaster Cosmos II Ultra 
  hide details  
Reply
post #2 of 31
so your voltage is what around the 1.45 /1.5 vcore range ?

thats nothing

around the 1.6/1.65 vcore is the max for air cooling so youv'e got ages to go.

nice overclock aswell
    
CPUMotherboardGraphicsRAM
3500+ venice core Abit Rocket Boy MX2 FTW! ¬.¬ TwinX ddr400/cas2.5 512mb x 2 
Hard DriveOSMonitorPower
200gb Maxtor Sata/ 80gb WD IDE XP proffesional/Ubuntu 17" 8ms Daewoo TFT Thermaltake Purepower 480w @18amps 
Case
Custom and uv :O 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
3500+ venice core Abit Rocket Boy MX2 FTW! ¬.¬ TwinX ddr400/cas2.5 512mb x 2 
Hard DriveOSMonitorPower
200gb Maxtor Sata/ 80gb WD IDE XP proffesional/Ubuntu 17" 8ms Daewoo TFT Thermaltake Purepower 480w @18amps 
Case
Custom and uv :O 
  hide details  
Reply
post #3 of 31
Thread Starter 
I'm having issues with anything set at X12 cpu multiplier for some reason, get a blank blue screen currently running the CPU at 1.512 Volts. But i'm afraid to go higher even though my temps are fine....what to do?
 
X79 Build
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7-6950X @ 4.0Ghz Asus Rampage V Extreme [Bios:3101] 2x EVGA GeForce Titan X SC Editions in SLI 32GB (4×8) Corsair Dominator Platinums (3000Mhz) 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 950 Pro 512GB M.2 Nvme 2x 256GB Vertex 4 SSD (RAID-0) 2x 2TB Seagate Barracuda [Storage] Pioneer BDR-207DBK Blu-ray Writer 
CoolingOSMonitorPower
Corsair H105 (Push/Pull) Windows 10 Pro x64 2x 27" Asus PG278Q ROG Swift 144hz  Corsair AX1500i Digital ATX 80 Plus Titanium 
CaseAudio
Lian Li PC-O8WX ATX Cube Case Logitech Z906 5.1 Surround 
CPUMotherboardGraphicsRAM
i7-3930K (C2) @ (4.6Ghz) Asus Rampage IV Extreme X79 (Bios 3204) 3x EVGA GTX780Ti's SC Editions 32GB (4x8GB) G-Skill TridentX 2400Mhz 
Hard DriveHard DriveOptical DriveCooling
2x 256GB OCZ Vertex 4's (RAID-0) 2x 2TB Seagate Barracuda 7200.14 64MB Cache Pioneer BDR-207DBK Blu-ray Writer Corsair H105 (Push/Pull) 
OSMonitorPowerCase
Win7 Pro 64Bit & Win10 Pro 64Bit Asus ROG Swift (2560x1440 @144hz) Corsair AX1200 + Corsair RED sleeved cables Coolermaster Cosmos II Ultra 
  hide details  
Reply
 
X79 Build
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7-6950X @ 4.0Ghz Asus Rampage V Extreme [Bios:3101] 2x EVGA GeForce Titan X SC Editions in SLI 32GB (4×8) Corsair Dominator Platinums (3000Mhz) 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 950 Pro 512GB M.2 Nvme 2x 256GB Vertex 4 SSD (RAID-0) 2x 2TB Seagate Barracuda [Storage] Pioneer BDR-207DBK Blu-ray Writer 
CoolingOSMonitorPower
Corsair H105 (Push/Pull) Windows 10 Pro x64 2x 27" Asus PG278Q ROG Swift 144hz  Corsair AX1500i Digital ATX 80 Plus Titanium 
CaseAudio
Lian Li PC-O8WX ATX Cube Case Logitech Z906 5.1 Surround 
CPUMotherboardGraphicsRAM
i7-3930K (C2) @ (4.6Ghz) Asus Rampage IV Extreme X79 (Bios 3204) 3x EVGA GTX780Ti's SC Editions 32GB (4x8GB) G-Skill TridentX 2400Mhz 
Hard DriveHard DriveOptical DriveCooling
2x 256GB OCZ Vertex 4's (RAID-0) 2x 2TB Seagate Barracuda 7200.14 64MB Cache Pioneer BDR-207DBK Blu-ray Writer Corsair H105 (Push/Pull) 
OSMonitorPowerCase
Win7 Pro 64Bit & Win10 Pro 64Bit Asus ROG Swift (2560x1440 @144hz) Corsair AX1200 + Corsair RED sleeved cables Coolermaster Cosmos II Ultra 
  hide details  
Reply
post #4 of 31
what temps do you have at the moment ?

idle and load


You will be fine to go higher with the vcore aslong as your load temps ( as in 100% cpu usage ) dont go higher than 55C

what speed is your ram running at now ?
    
CPUMotherboardGraphicsRAM
3500+ venice core Abit Rocket Boy MX2 FTW! ¬.¬ TwinX ddr400/cas2.5 512mb x 2 
Hard DriveOSMonitorPower
200gb Maxtor Sata/ 80gb WD IDE XP proffesional/Ubuntu 17" 8ms Daewoo TFT Thermaltake Purepower 480w @18amps 
Case
Custom and uv :O 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
3500+ venice core Abit Rocket Boy MX2 FTW! ¬.¬ TwinX ddr400/cas2.5 512mb x 2 
Hard DriveOSMonitorPower
200gb Maxtor Sata/ 80gb WD IDE XP proffesional/Ubuntu 17" 8ms Daewoo TFT Thermaltake Purepower 480w @18amps 
Case
Custom and uv :O 
  hide details  
Reply
post #5 of 31
Remember that the memory controller is built into AMD 64's so thats probably an explaination of why your ram works at the same speed it did not before.
    
CPUMotherboardGraphicsRAM
Intel Centrino T2300 @ 1.83 GHz Intel GM945 Express Chipset Intel GMA950 2x1GB PC2-5300 667MHz 
Hard DriveOptical DriveOSMonitor
250GB 7200rpm WD Scorpio Black USB External DVD/CDRW Windows XP Pro SP3 12.1" 1024x768 DVI 
PowerCaseMouse
4400mAh Li-ion (7+ hours on power saving profile) Carbon Fibre with Magnesium alloy roll cage IBM Trackpoint 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Centrino T2300 @ 1.83 GHz Intel GM945 Express Chipset Intel GMA950 2x1GB PC2-5300 667MHz 
Hard DriveOptical DriveOSMonitor
250GB 7200rpm WD Scorpio Black USB External DVD/CDRW Windows XP Pro SP3 12.1" 1024x768 DVI 
PowerCaseMouse
4400mAh Li-ion (7+ hours on power saving profile) Carbon Fibre with Magnesium alloy roll cage IBM Trackpoint 
  hide details  
Reply
post #6 of 31
Thread Starter 
At 2.8Ghz idle 36Celcius. Before at 2.75Ghz i used to get BSOD's, so i increased the volts on a whim one notch and it works upto 2.8Ghz. But as soon as i leave the CPU speed the same and DDR the same (set to 333Mhz) and put the CPU multiplier on X12 i get a blank blue screen. All i ever seem to get is lock ups to be honest, if i manage to get to windows it may lock up there or during a stress test like 3DMark05. But at the moment it works fine @ 2.8 during stress tests and is completely stable.
 
X79 Build
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7-6950X @ 4.0Ghz Asus Rampage V Extreme [Bios:3101] 2x EVGA GeForce Titan X SC Editions in SLI 32GB (4×8) Corsair Dominator Platinums (3000Mhz) 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 950 Pro 512GB M.2 Nvme 2x 256GB Vertex 4 SSD (RAID-0) 2x 2TB Seagate Barracuda [Storage] Pioneer BDR-207DBK Blu-ray Writer 
CoolingOSMonitorPower
Corsair H105 (Push/Pull) Windows 10 Pro x64 2x 27" Asus PG278Q ROG Swift 144hz  Corsair AX1500i Digital ATX 80 Plus Titanium 
CaseAudio
Lian Li PC-O8WX ATX Cube Case Logitech Z906 5.1 Surround 
CPUMotherboardGraphicsRAM
i7-3930K (C2) @ (4.6Ghz) Asus Rampage IV Extreme X79 (Bios 3204) 3x EVGA GTX780Ti's SC Editions 32GB (4x8GB) G-Skill TridentX 2400Mhz 
Hard DriveHard DriveOptical DriveCooling
2x 256GB OCZ Vertex 4's (RAID-0) 2x 2TB Seagate Barracuda 7200.14 64MB Cache Pioneer BDR-207DBK Blu-ray Writer Corsair H105 (Push/Pull) 
OSMonitorPowerCase
Win7 Pro 64Bit & Win10 Pro 64Bit Asus ROG Swift (2560x1440 @144hz) Corsair AX1200 + Corsair RED sleeved cables Coolermaster Cosmos II Ultra 
  hide details  
Reply
 
X79 Build
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7-6950X @ 4.0Ghz Asus Rampage V Extreme [Bios:3101] 2x EVGA GeForce Titan X SC Editions in SLI 32GB (4×8) Corsair Dominator Platinums (3000Mhz) 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 950 Pro 512GB M.2 Nvme 2x 256GB Vertex 4 SSD (RAID-0) 2x 2TB Seagate Barracuda [Storage] Pioneer BDR-207DBK Blu-ray Writer 
CoolingOSMonitorPower
Corsair H105 (Push/Pull) Windows 10 Pro x64 2x 27" Asus PG278Q ROG Swift 144hz  Corsair AX1500i Digital ATX 80 Plus Titanium 
CaseAudio
Lian Li PC-O8WX ATX Cube Case Logitech Z906 5.1 Surround 
CPUMotherboardGraphicsRAM
i7-3930K (C2) @ (4.6Ghz) Asus Rampage IV Extreme X79 (Bios 3204) 3x EVGA GTX780Ti's SC Editions 32GB (4x8GB) G-Skill TridentX 2400Mhz 
Hard DriveHard DriveOptical DriveCooling
2x 256GB OCZ Vertex 4's (RAID-0) 2x 2TB Seagate Barracuda 7200.14 64MB Cache Pioneer BDR-207DBK Blu-ray Writer Corsair H105 (Push/Pull) 
OSMonitorPowerCase
Win7 Pro 64Bit & Win10 Pro 64Bit Asus ROG Swift (2560x1440 @144hz) Corsair AX1200 + Corsair RED sleeved cables Coolermaster Cosmos II Ultra 
  hide details  
Reply
post #7 of 31
1/2 CPU multiplyer do not effect the RAM, only the CPU. There is a FAQ on that.
Some bumps on the RAM, chip set and Memory controler voltage may help your overall OCing. Keep working it, you have a very good OC going so far
    
CPUMotherboardGraphicsRAM
X4 965 ASUS M4A79 Deluxe 9800GTx2 2x2G OCZ Reapers 
Hard DriveOptical DriveOSMonitor
500G WD Black LiteOn CD/DVD R/W Win7 64 22'' ws Acer AL2223W 
KeyboardPowerMouse
MS KU462 Natural SS DA750 MS 5 button 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
X4 965 ASUS M4A79 Deluxe 9800GTx2 2x2G OCZ Reapers 
Hard DriveOptical DriveOSMonitor
500G WD Black LiteOn CD/DVD R/W Win7 64 22'' ws Acer AL2223W 
KeyboardPowerMouse
MS KU462 Natural SS DA750 MS 5 button 
  hide details  
Reply
post #8 of 31
Thread Starter 
I'm totally lost! I can't get 2.8Ghz to work without locking up on 3DMark05. I am depressed, what would be the cause of a PC freezing without errors? A lot of guides saying voltage, but no amount of raising the CPU voltage changes a thing. Odd thing is anything in the 2.9Ghz range fails to get into windows, i get a "blank" blue screen appear and freezes.

All things are set within their boundries so i'm totally gazumped!
 
X79 Build
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7-6950X @ 4.0Ghz Asus Rampage V Extreme [Bios:3101] 2x EVGA GeForce Titan X SC Editions in SLI 32GB (4×8) Corsair Dominator Platinums (3000Mhz) 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 950 Pro 512GB M.2 Nvme 2x 256GB Vertex 4 SSD (RAID-0) 2x 2TB Seagate Barracuda [Storage] Pioneer BDR-207DBK Blu-ray Writer 
CoolingOSMonitorPower
Corsair H105 (Push/Pull) Windows 10 Pro x64 2x 27" Asus PG278Q ROG Swift 144hz  Corsair AX1500i Digital ATX 80 Plus Titanium 
CaseAudio
Lian Li PC-O8WX ATX Cube Case Logitech Z906 5.1 Surround 
CPUMotherboardGraphicsRAM
i7-3930K (C2) @ (4.6Ghz) Asus Rampage IV Extreme X79 (Bios 3204) 3x EVGA GTX780Ti's SC Editions 32GB (4x8GB) G-Skill TridentX 2400Mhz 
Hard DriveHard DriveOptical DriveCooling
2x 256GB OCZ Vertex 4's (RAID-0) 2x 2TB Seagate Barracuda 7200.14 64MB Cache Pioneer BDR-207DBK Blu-ray Writer Corsair H105 (Push/Pull) 
OSMonitorPowerCase
Win7 Pro 64Bit & Win10 Pro 64Bit Asus ROG Swift (2560x1440 @144hz) Corsair AX1200 + Corsair RED sleeved cables Coolermaster Cosmos II Ultra 
  hide details  
Reply
 
X79 Build
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7-6950X @ 4.0Ghz Asus Rampage V Extreme [Bios:3101] 2x EVGA GeForce Titan X SC Editions in SLI 32GB (4×8) Corsair Dominator Platinums (3000Mhz) 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 950 Pro 512GB M.2 Nvme 2x 256GB Vertex 4 SSD (RAID-0) 2x 2TB Seagate Barracuda [Storage] Pioneer BDR-207DBK Blu-ray Writer 
CoolingOSMonitorPower
Corsair H105 (Push/Pull) Windows 10 Pro x64 2x 27" Asus PG278Q ROG Swift 144hz  Corsair AX1500i Digital ATX 80 Plus Titanium 
CaseAudio
Lian Li PC-O8WX ATX Cube Case Logitech Z906 5.1 Surround 
CPUMotherboardGraphicsRAM
i7-3930K (C2) @ (4.6Ghz) Asus Rampage IV Extreme X79 (Bios 3204) 3x EVGA GTX780Ti's SC Editions 32GB (4x8GB) G-Skill TridentX 2400Mhz 
Hard DriveHard DriveOptical DriveCooling
2x 256GB OCZ Vertex 4's (RAID-0) 2x 2TB Seagate Barracuda 7200.14 64MB Cache Pioneer BDR-207DBK Blu-ray Writer Corsair H105 (Push/Pull) 
OSMonitorPowerCase
Win7 Pro 64Bit & Win10 Pro 64Bit Asus ROG Swift (2560x1440 @144hz) Corsair AX1200 + Corsair RED sleeved cables Coolermaster Cosmos II Ultra 
  hide details  
Reply
post #9 of 31
so its posting at 2.8?
    
CPUMotherboardGraphicsRAM
Intel Centrino T2300 @ 1.83 GHz Intel GM945 Express Chipset Intel GMA950 2x1GB PC2-5300 667MHz 
Hard DriveOptical DriveOSMonitor
250GB 7200rpm WD Scorpio Black USB External DVD/CDRW Windows XP Pro SP3 12.1" 1024x768 DVI 
PowerCaseMouse
4400mAh Li-ion (7+ hours on power saving profile) Carbon Fibre with Magnesium alloy roll cage IBM Trackpoint 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Centrino T2300 @ 1.83 GHz Intel GM945 Express Chipset Intel GMA950 2x1GB PC2-5300 667MHz 
Hard DriveOptical DriveOSMonitor
250GB 7200rpm WD Scorpio Black USB External DVD/CDRW Windows XP Pro SP3 12.1" 1024x768 DVI 
PowerCaseMouse
4400mAh Li-ion (7+ hours on power saving profile) Carbon Fibre with Magnesium alloy roll cage IBM Trackpoint 
  hide details  
Reply
post #10 of 31
You could try running your memory at a divider, or just upping your memory voltage. I think corsair ram is good up too 2.8? Dont quote me on that, but thats what my xms is rated up to. Remember though, xms has a heat spreader. Also, lowering your HTT might help, I keep mine around 600, as it doesnt really affect performance that much, and can keep your nb much cooler and under less stress.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD - General
Overclock.net › Forums › AMD › AMD - General › OC Danger!!!?