Overclock.net › Forums › Overclockers Care › Overclock.net Folding@Home Team › Trouble uploading work units via tethered 3G connection.
New Posts  All Forums:Forum Nav:

Trouble uploading work units via tethered 3G connection.

post #1 of 2
Thread Starter 
I'm running a SMP console client on my 2500K, and a GPU3 console client on my GT440, both latest versions.
I'm not experiencing any issues with the GPU client, but the SMP client has around a 20% success rate at uploading work units after they're done, maybe less. I haven't had any issues with downloading work, so naturally I have a couple WU's in queue. One of which was completed March 1st and refuses to upload.

About the connection.. I'm running a Blackberry Torch 9800 in modem mode, I have unlimited data and no throttling thanks to my being an Alltel customer who has migrated to AT&T and still under the old contract terms. thumb.gif
Anyway, the connection is pretty solid. I have full signal and my best web download speeds are a little over 100KB/s, which would lead me to believe that I'm probably connected at approx 1Mbps, give or take a few bits.

With all this considered, I really want to know if there's a way to manually upload WU's like through a web browser for example. Or is there any configuration I can do to the client to help it along?
Here's a rather long snip from the console. This is from the time I finished my latest WU earlier up until just a couple minutes ago.
Code:
[17:32:40] Folding@home Core Shutdown: FINISHED_UNIT
[17:32:42] CoreStatus = 64 (100)
[17:32:42] Sending work to server
[17:32:42] Project: 11070 (Run 382, Clone 0, Gen 39)


[17:32:42] + Attempting to send results [March 4 17:32:42 UTC]
[17:36:41] - Couldn't send HTTP request to server
[17:36:41] + Could not connect to Work Server (results)
[17:36:41]     (171.64.65.55:8080)
[17:36:41] + Retrying using alternative port
[17:39:49] - Couldn't send HTTP request to server
[17:39:49] + Could not connect to Work Server (results)
[17:39:49]     (171.64.65.55:80)
[17:39:49] - Error: Could not transmit unit 02 (completed March 4) to work serve
r.
[17:39:49]   Keeping unit 02 in queue.
[17:39:49] Project: 11070 (Run 382, Clone 0, Gen 39)


[17:39:49] + Attempting to send results [March 4 17:39:49 UTC]
[17:41:50] - Couldn't send HTTP request to server
[17:41:50] + Could not connect to Work Server (results)
[17:41:50]     (171.64.65.55:8080)
[17:41:50] + Retrying using alternative port
[17:44:25] - Couldn't send HTTP request to server
[17:44:25] + Could not connect to Work Server (results)
[17:44:25]     (171.64.65.55:80)
[17:44:25] - Error: Could not transmit unit 02 (completed March 4) to work serve
r.


[17:44:25] + Attempting to send results [March 4 17:44:25 UTC]
[17:44:29] - Couldn't send HTTP request to server
[17:44:29] + Could not connect to Work Server (results)
[17:44:29]     (171.67.108.26:8080)
[17:44:29] + Retrying using alternative port
[17:44:31] - Couldn't send HTTP request to server
[17:44:31] + Could not connect to Work Server (results)
[17:44:31]     (171.67.108.26:80)
[17:44:31]   Could not transmit unit 02 to Collection server; keeping in queue.
[17:44:31] Project: 11071 (Run 181, Clone 0, Gen 31)


[17:44:31] + Attempting to send results [March 4 17:44:31 UTC]
[17:49:42] - Couldn't send HTTP request to server
[17:49:42] + Could not connect to Work Server (results)
[17:49:42]     (171.64.65.55:8080)
[17:49:42] + Retrying using alternative port
[17:52:21] - Couldn't send HTTP request to server
[17:52:21] + Could not connect to Work Server (results)
[17:52:21]     (171.64.65.55:80)
[17:52:21] - Error: Could not transmit unit 06 (completed March 1) to work serve
r.


[17:52:21] + Attempting to send results [March 4 17:52:21 UTC]
[17:52:28] - Couldn't send HTTP request to server
[17:52:28] + Could not connect to Work Server (results)
[17:52:28]     (171.67.108.26:8080)
[17:52:28] + Retrying using alternative port
[17:52:30] - Couldn't send HTTP request to server
[17:52:30] + Could not connect to Work Server (results)
[17:52:30]     (171.67.108.26:80)
[17:52:30]   Could not transmit unit 06 to Collection server; keeping in queue.
[17:52:30] Project: 11020 (Run 0, Clone 11129, Gen 33)


[17:52:30] + Attempting to send results [March 4 17:52:30 UTC]
[17:57:30] + Results successfully sent
[17:57:30] Thank you for your contribution to Folding@Home.
[17:57:30] + Number of Units Completed: 10

[17:57:31] - Preparing to get new work unit...
[17:57:31] Cleaning up work directory
[17:57:31] + Attempting to get work packet
[17:57:31] Passkey found
[17:57:31] - Connecting to assignment server
[17:57:32] - Successful: assigned to (171.64.65.55).
[17:57:32] + News From Folding@Home: Welcome to Folding@Home
[17:57:32] Loaded queue successfully.
[17:57:47] Project: 11070 (Run 382, Clone 0, Gen 39)


[17:57:47] + Attempting to send results [March 4 17:57:47 UTC]
[18:06:25] - Couldn't send HTTP request to server
[18:06:25] + Could not connect to Work Server (results)
[18:06:25]     (171.64.65.55:8080)
[18:06:25] + Retrying using alternative port
[18:08:45] - Couldn't send HTTP request to server
[18:08:45] + Could not connect to Work Server (results)
[18:08:45]     (171.64.65.55:80)
[18:08:45] - Error: Could not transmit unit 02 (completed March 4) to work serve
r.


[18:08:45] + Attempting to send results [March 4 18:08:45 UTC]
[18:08:47] - Couldn't send HTTP request to server
[18:08:47] + Could not connect to Work Server (results)
[18:08:47]     (171.67.108.26:8080)
[18:08:47] + Retrying using alternative port
[18:08:49] - Couldn't send HTTP request to server
[18:08:49] + Could not connect to Work Server (results)
[18:08:49]     (171.67.108.26:80)
[18:08:49]   Could not transmit unit 02 to Collection server; keeping in queue.
[18:08:49] Project: 11071 (Run 181, Clone 0, Gen 31)


[18:08:49] + Attempting to send results [March 4 18:08:49 UTC]
[18:16:38] - Couldn't send HTTP request to server
[18:16:38] + Could not connect to Work Server (results)
[18:16:38]     (171.64.65.55:8080)
[18:16:38] + Retrying using alternative port
[18:21:08] - Couldn't send HTTP request to server
[18:21:08] + Could not connect to Work Server (results)
[18:21:08]     (171.64.65.55:80)
[18:21:08] - Error: Could not transmit unit 06 (completed March 1) to work serve
r.


[18:21:08] + Attempting to send results [March 4 18:21:08 UTC]
[18:21:10] - Couldn't send HTTP request to server
[18:21:10] + Could not connect to Work Server (results)
[18:21:10]     (171.67.108.26:8080)
[18:21:10] + Retrying using alternative port
[18:21:11] - Couldn't send HTTP request to server
[18:21:11] + Could not connect to Work Server (results)
[18:21:11]     (171.67.108.26:80)
[18:21:11]   Could not transmit unit 06 to Collection server; keeping in queue.
[18:21:11] + Closed connections
[18:21:11]
[18:21:11] + Processing work unit
[18:21:11] Core required: FahCore_a3.exe
[18:21:11] Core found.
[18:21:11] Working on queue slot 03 [March 4 18:21:11 UTC]
[18:21:11] + Working ...
[18:21:11]
[18:21:11] *------------------------------*
[18:21:11] Folding@Home Gromacs SMP Core
[18:21:11] Version 2.27 (Dec. 15, 2010)
[18:21:11]
[18:21:11] Preparing to commence simulation
[18:21:11] - Looking at optimizations...
[18:21:11] - Created dyn
[18:21:11] - Files status OK
[18:21:11] - Expanded 766354 -> 1204688 (decompressed 157.1 percent)
[18:21:11] Called DecompressByteArray: compressed_data_size=766354 data_size=120
4688, decompressed_data_size=1204688 diff=0
[18:21:11] - Digital signature verified
[18:21:11]
[18:21:11] Project: 11021 (Run 0, Clone 589, Gen 37)
[18:21:11]
[18:21:11] Assembly optimizations on if available.
[18:21:11] Entering M.D.
Lounge Machine
(17 items)
 
Doc Wallace
(14 items)
 
Cap'n Crunch
(12 items)
 
CPUMotherboardGraphicsRAM
Core i5-2500K @ 4.70 GHz Asus P8P67 Pro XFX Double D R9 280 [1200/1600] 8GB G.Skill Sniper DDR3-2133 [9-11-10-28] 
Hard DriveHard DriveOptical DriveCooling
Mushkin Chronos 120GB SATA3 Samsung Spinpoint F3 500GB Asus DRW-24B1ST XSPC Rasa 750 RS240 
OSMonitorKeyboardPower
Windows 7 Pro x64 Asus VH236H Rosewill RK-7300 Rosewill RX750-S-B 
CaseMouseAudioOther
Lancool PC-K62 Logitech Mx518 Realtek HD 192KHz Visiontek Killer 2100 NIC 
CPUMotherboardGraphicsRAM
Phenom II X4 955 @ 3.80 GHz ASRock 770iCafe AM3+ EVGA Geforce GTX 460 1GB 8GB G.Skill Sniper 1866 
Hard DriveHard DriveOptical DriveCooling
Corsair Nova 30GB WD Caviar Blue 640GB Lite-On DVDRW Corsair H50 
OSMonitorPowerCase
Windows 7 Pro x64 Asus VH236H Corsair CX430 Diablotek EVO RPA-6170 
Mouse
Logitech LX3 
CPUMotherboardGraphicsRAM
Xeon 3060 @ 3.6GHz MSI P35 Platinum EVGA Geforce GTS 250 512MB 2GB OCZ Fatal1ty + 2GB ADATA Premier DDR2 
Hard DriveOptical DriveCoolingOS
Samsung HD161HJ DVDRW Xigmatek Dark Knight Windows 7 Home Premium x64 
MonitorPowerCaseMouse
Compaq S1922A Cheifmax 650W Raidmax Smilodon EB Logitech LX3 
  hide details  
Reply
Lounge Machine
(17 items)
 
Doc Wallace
(14 items)
 
Cap'n Crunch
(12 items)
 
CPUMotherboardGraphicsRAM
Core i5-2500K @ 4.70 GHz Asus P8P67 Pro XFX Double D R9 280 [1200/1600] 8GB G.Skill Sniper DDR3-2133 [9-11-10-28] 
Hard DriveHard DriveOptical DriveCooling
Mushkin Chronos 120GB SATA3 Samsung Spinpoint F3 500GB Asus DRW-24B1ST XSPC Rasa 750 RS240 
OSMonitorKeyboardPower
Windows 7 Pro x64 Asus VH236H Rosewill RK-7300 Rosewill RX750-S-B 
CaseMouseAudioOther
Lancool PC-K62 Logitech Mx518 Realtek HD 192KHz Visiontek Killer 2100 NIC 
CPUMotherboardGraphicsRAM
Phenom II X4 955 @ 3.80 GHz ASRock 770iCafe AM3+ EVGA Geforce GTX 460 1GB 8GB G.Skill Sniper 1866 
Hard DriveHard DriveOptical DriveCooling
Corsair Nova 30GB WD Caviar Blue 640GB Lite-On DVDRW Corsair H50 
OSMonitorPowerCase
Windows 7 Pro x64 Asus VH236H Corsair CX430 Diablotek EVO RPA-6170 
Mouse
Logitech LX3 
CPUMotherboardGraphicsRAM
Xeon 3060 @ 3.6GHz MSI P35 Platinum EVGA Geforce GTS 250 512MB 2GB OCZ Fatal1ty + 2GB ADATA Premier DDR2 
Hard DriveOptical DriveCoolingOS
Samsung HD161HJ DVDRW Xigmatek Dark Knight Windows 7 Home Premium x64 
MonitorPowerCaseMouse
Compaq S1922A Cheifmax 650W Raidmax Smilodon EB Logitech LX3 
  hide details  
Reply
post #2 of 2
Honestly, I would install this onto your computer for your SMP folding and enable Langouste. 3G has horrible upload speeds! http://www.linuxforge.net/docs/crunching/fah-vmware.php
 
HDPC
(15 items)
 
 
CPUMotherboardGraphicsGraphics
AMD Ryzen 7 1700x Asus Prime X370-Pro MSI Hawk Ek GTX 1070 MSI Hawk Ek GTX 1070 
RAMHard DriveHard DriveHard Drive
EVGA DDR4 3200 Kingston SSDNow 120GB WD Green 2TB WD Black 2 TB 
Optical DriveCoolingCoolingCooling
Samsung DVDR Ek Supremacy Evo Blue Edition XSPC RX360 Radiator Swiftech MCP 655b 
CoolingCoolingOSMonitor
EK XSPC Dual Bay Reservoir Windows 10 e-Machine 23" 
KeyboardPowerCaseMouse
OCN Ducky DK9008 G2 Keyboard PC Power & Cooling Silencer 750W Antec Lanboy Air Logitech G400s 
Audio
Realtek HD Audio 
CPUMotherboardGraphicsRAM
Intel i7 2600k Asus Sabertooth P67 EVGA GTX 770 G.Skill Ripjaws X 
Hard DriveCoolingCoolingCooling
Kingston SSDNow 120GB XSPC Rasa Acetal XSPC Pump/Res  Ek GTX 770 
OSMonitorKeyboardPower
Windows 10 Pro Vizio 58" 4k Logitec Wireless Coolmax 600w 
CaseMouseAudio
Antec 300 Logitec Wireless Realtor HD Audio  
  hide details  
Reply
 
HDPC
(15 items)
 
 
CPUMotherboardGraphicsGraphics
AMD Ryzen 7 1700x Asus Prime X370-Pro MSI Hawk Ek GTX 1070 MSI Hawk Ek GTX 1070 
RAMHard DriveHard DriveHard Drive
EVGA DDR4 3200 Kingston SSDNow 120GB WD Green 2TB WD Black 2 TB 
Optical DriveCoolingCoolingCooling
Samsung DVDR Ek Supremacy Evo Blue Edition XSPC RX360 Radiator Swiftech MCP 655b 
CoolingCoolingOSMonitor
EK XSPC Dual Bay Reservoir Windows 10 e-Machine 23" 
KeyboardPowerCaseMouse
OCN Ducky DK9008 G2 Keyboard PC Power & Cooling Silencer 750W Antec Lanboy Air Logitech G400s 
Audio
Realtek HD Audio 
CPUMotherboardGraphicsRAM
Intel i7 2600k Asus Sabertooth P67 EVGA GTX 770 G.Skill Ripjaws X 
Hard DriveCoolingCoolingCooling
Kingston SSDNow 120GB XSPC Rasa Acetal XSPC Pump/Res  Ek GTX 770 
OSMonitorKeyboardPower
Windows 10 Pro Vizio 58" 4k Logitec Wireless Coolmax 600w 
CaseMouseAudio
Antec 300 Logitec Wireless Realtor HD Audio  
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Overclock.net Folding@Home Team
Overclock.net › Forums › Overclockers Care › Overclock.net Folding@Home Team › Trouble uploading work units via tethered 3G connection.