This Classified is Closed
For Sale:
FS: CM 690 II Adv with many accessories $45 BAY AREA PICK-UP ONLY
Will Ship To: Anywhere
For sale today I have my CM 690 II Adv. It was used for around 8 months.
The exterior is in new condition. The interior is also pretty much like new, but you may find a very small scratch here and there which is unnoticeable.
The case comes with a lot of accessories. I have a window side panel that will be included (purchased it for $25 new) and a top panel which I received from CM RMA. Also I will include a 140mm Blue LED fan, 2 140mm fans (used to be blue LED but I stripped the LED's since I prefer having no LED's, but they still work perfectly and move the same amount of air as when they had LED's), and 1 140mm black fan. All of them are CM branded fans, and they move the same amount of air.
The one issue with the case is the standoffs. Only 4 screws can be installed in the standoffs perfectly, but all standoffs can be inserted still. I created a key below to show this, with a picture. This applies to ATX boards.
Green: Standoffs can be screwed in place perfectly, and screws can be screwed into the standoffs perfectly to hold your motherboard in place.
Red: Standoffs are stuck in the motherboard tray and when you try to remove them they just spin in place
Blue: Standoff can be removed, but when inserted it just spins in place
So all 9 standoffs can be installed, but only 4 will allow screws to be inserted into them to hold your MB in place. This means that your MB will still be held up by the 9 standoffs, but only 4 will support your MB and hold it in place. Nevertheless your MB should still be fine. My board was held in place by 4 screws for a while and nothing happened. It was holding on just as tight as if it had all 9 in place.
All accessories are included, except motherboard standoffs. I'm not 100% sure if all standoffs are included or not.
Asking for $50 CASH. I will not ship the case, I will only allow pick-ups. I live in Mountain View, CA. My zip code is 94040.
PM me for more details.
Edited by ComradeNF - 3/12/12 at 5:26pm
The exterior is in new condition. The interior is also pretty much like new, but you may find a very small scratch here and there which is unnoticeable.
The case comes with a lot of accessories. I have a window side panel that will be included (purchased it for $25 new) and a top panel which I received from CM RMA. Also I will include a 140mm Blue LED fan, 2 140mm fans (used to be blue LED but I stripped the LED's since I prefer having no LED's, but they still work perfectly and move the same amount of air as when they had LED's), and 1 140mm black fan. All of them are CM branded fans, and they move the same amount of air.
The one issue with the case is the standoffs. Only 4 screws can be installed in the standoffs perfectly, but all standoffs can be inserted still. I created a key below to show this, with a picture. This applies to ATX boards.
Green: Standoffs can be screwed in place perfectly, and screws can be screwed into the standoffs perfectly to hold your motherboard in place.
Red: Standoffs are stuck in the motherboard tray and when you try to remove them they just spin in place
Blue: Standoff can be removed, but when inserted it just spins in place
So all 9 standoffs can be installed, but only 4 will allow screws to be inserted into them to hold your MB in place. This means that your MB will still be held up by the 9 standoffs, but only 4 will support your MB and hold it in place. Nevertheless your MB should still be fine. My board was held in place by 4 screws for a while and nothing happened. It was holding on just as tight as if it had all 9 in place.
All accessories are included, except motherboard standoffs. I'm not 100% sure if all standoffs are included or not.
Asking for $50 CASH. I will not ship the case, I will only allow pick-ups. I live in Mountain View, CA. My zip code is 94040.
PM me for more details.
Edited by ComradeNF - 3/12/12 at 5:26pm
