Overclock.net › Forums › Cooling › Water Cooling › universal nb wb for 19/13 fittings
New Posts  All Forums:Forum Nav:

universal nb wb for 19/13 fittings

post #1 of 10
Thread Starter 
i'm looking for a universal nb wb that can handle 19/13 fittings,
eveything seems to be too small to accommodate 2 fittings,

any model?

thx again. smile.gif
post #2 of 10
In this case can you please use Imperial measurement.....I am assuming that you are possibly talking about 1/2" fittings?
post #3 of 10
Thread Starter 
Quote:
Originally Posted by smash_mouth01 View Post

In this case can you please use Imperial measurement.....I am assuming that you are possibly talking about 1/2" fittings?

like this,for tube ID 1/2 OD 3/4:

http://www.aquatuning.co.uk/product_info.php/info/p5496_19-13mm-compression-fitting--straight-G1-4--black-nickel-plated.html
post #4 of 10
Cheers now I can answer.

Also what is your motherboard, because you may be better off getting a full cover.
post #5 of 10
Thread Starter 
i need a universal wb cause i'm about to upgrade my system(asus p5k-e now),
and also cause full cover are way too much expensive.
post #6 of 10
The Watercool HEATKILLER® NSB Rev3.0 LT, but that rules out compression fittings.

Alphacool HF 14 Smart Motion Universal Copper Edition (compression questionable)

Enzotech Sapphire Northbridge Water Block Rev. A (compression questionable)

XSPC X20 Xtreme Chipset Universal Water Block

They are all questionable in regards to compression fittings.
post #7 of 10
www.koolance.com universal water block GPU-220 is both universal GPU & North/South, copper & brass and is v. low flow resistance.

I have machined custom side rail mount'g adapters and have fitted to m4e n/s chip and asus gtx580. with good results.

The koolance GPU-210 has higher flow resistance and is not suitable for gpu's.

The koolance water block build quality is quite good.
post #8 of 10
for complete component pics, pls view http://www.pureoverclock.com/review.php?id=1242&page=1

this is only test of both GPU-210 & GPU-220 universal gpu & n/s chip water blocks.

I wanted all metal and Enzo is v. difficult to obtain in asia-pacific / enzo also has nozzle o-ring issues of compatibility w/ bitspower fittings. koolance & bitspower are compatible.
Edited by buildtoexcess - 3/8/12 at 1:58am
post #9 of 10
Thread Starter 
ty both for replies.

i'm interested in this xspc delta v3 chipset,
it seems perfect and "should" be compatible with 13/19 compression fittings.
post #10 of 10
Thread Starter 
EDIT:

well i've just sent a mail to aquatuning and seems that xspc delta v3 canot handle such big fittings.
may be koolance is the only solution?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › universal nb wb for 19/13 fittings