Good morning! Here we are again
GF2MX voltmodded and running again!
Pumping 2.22V from a stock 2V through this sucker, the regulator is getting a bit toasty, but doesn't show any signs of overheating. I found that the core is convex, and I'm using toothpaste as a TIM
Upgraded drivers to 61.77, 44.03s were artifacting like hell at speeds that 66.93s were running perfectly fine.
Scores are going down, down and down. What the crap? Seems the card isn't in particularly good shape.
Update: Okay, 61.77 has a lower frequency threshold than 66.93. Hovering 3.8k marks, so I'm wiping drivers and going back to 66.93.
Update 2: Slowly climbing back up again... 3880 3DMarks now, at 252/200MHz. This is one bad, very bad memory ._.
Update 2.1: 3897 points at 260/200. Attempting 260/202.
Update 2.2: Worse results. Trying 254/202.
Update 2.3: Same results, going 270/200.
Update 2.4: She's alive!! We're at 3920 points with 280/201! Attempting 290/201. Unstable! 285/201 now.
Update 2.5: Closing up on the 21th! 3940 points there we go!!
Benching 287/201 with a LOD of 5.8 now. -> Unstable! Back to 285/201, tweaking LOD settings...
Update 3: 3948 points!!! I'm on the 21th place, beating the previous guy by ONE point!
Moving on to 03 and Aquamark
Update 4: 246 points in 03 set me in the 16th place, and the team in the 12th!! Currently benching Aquamark, but it takes a loooooooong time u__u
Update 4.1: 9147 points in Aquamark3 kicking me to the 8th place, and already overclocked the card a bit to see if I can make it to the 7th! Edited by Artikbot - 2/8/13 at 5:06am