So I have seen various guides around the net, but none of them on a proper gigabyte board.
Like Offset isnt called offset on gigabyte boards, but DVID and what not.
And gigabyte boards dont function like asus boards etc.
TDP isnt called TDP but called Turbo Something (Watt)
TDC isnt called TDC but Something Current (Amps)
For instance when I set voltage to normal and DVID to normal, and raise multiplier and reboot, my voltage is increased anyway. Instead of lying on stock volt.
So I cant find out how high I can go on a stock voltage, because it keep raising it automaticly (in bios) instead of staying at around 1.22 or whatever is stock. It goes up as high as 1.35 (thats with multiplier @ 40) and I have heard people with good chips reaching near 4ghz on stock voltage.
Oh and if I set stock voltage on the vcore it STILL WONT STICK, but keep fluctuating or going much higher than what is set.
As its a gigabyte board it also has LLC however I havent really grasped how it works other than trying to reduce vdroop..
Im Looking for a proper guide how to Overclock using TURBO and the DVID.
However with Turbo I can ONLY edit Core 1 - 3 (up to around 51 or 53) and not the fourth one, it automaticly goes back to auto and resets all the other cores to auto if I touch it.
Or a normal guide how to overclock properly using multiplier and voltage, while keeping Thermal Monitor and C1.
I saw one guide here on the forum but it was cluttered and not super easy to understand everything.
Like Offset isnt called offset on gigabyte boards, but DVID and what not.
And gigabyte boards dont function like asus boards etc.
TDP isnt called TDP but called Turbo Something (Watt)
TDC isnt called TDC but Something Current (Amps)
For instance when I set voltage to normal and DVID to normal, and raise multiplier and reboot, my voltage is increased anyway. Instead of lying on stock volt.
So I cant find out how high I can go on a stock voltage, because it keep raising it automaticly (in bios) instead of staying at around 1.22 or whatever is stock. It goes up as high as 1.35 (thats with multiplier @ 40) and I have heard people with good chips reaching near 4ghz on stock voltage.
Oh and if I set stock voltage on the vcore it STILL WONT STICK, but keep fluctuating or going much higher than what is set.
As its a gigabyte board it also has LLC however I havent really grasped how it works other than trying to reduce vdroop..
Im Looking for a proper guide how to Overclock using TURBO and the DVID.
However with Turbo I can ONLY edit Core 1 - 3 (up to around 51 or 53) and not the fourth one, it automaticly goes back to auto and resets all the other cores to auto if I touch it.
Or a normal guide how to overclock properly using multiplier and voltage, while keeping Thermal Monitor and C1.
I saw one guide here on the forum but it was cluttered and not super easy to understand everything.
PC.
(20 items) |
|
PC.
(20 items) |
