Overclock.net › Forums › Intel › Intel - General › Overclock P5GC-MX/1333
New Posts  All Forums:Forum Nav:

Overclock P5GC-MX/1333

post #1 of 2
Thread Starter 
Okay, i'm kinda new to this and i'd like to get some suggestions on overclocking my PC.

Warning: Spoiler! (Click to show)
Processor 1 ID = 0
Number of cores 2 (max 2)
Number of threads 2 (max 2)
Name Intel Pentium E2180
Codename Conroe
Specification Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz
Package (platform ID) Socket 775 LGA (0x0)
Extended CPUID 6.F
Core Stepping M0
Technology 65 nm
Core Speed 1320.9 MHz
Multiplier x FSB 6.0 x 220.1 MHz
Rated Bus speed 880.6 MHz
Stock frequency 2000 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, EM64T
L1 Data cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 1024 KBytes, 4-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 10.0x
Max VID 1.263 V

Mainboard Model P5GC-MX/1333 (0x000002DA - 0x6A235C60)
LPCIO Vendor Winbond
LPCIO Model W83627DHG
LPCIO Vendor ID 0x5CA3
LPCIO Chip ID 0xA0
LPCIO Revision ID 0x23

Northbridge Intel i945G rev. A2
Southbridge Intel 82801GB (ICH7/R) rev. A1
Graphic Interface PCI-Express
PCI-E Link Width x1
PCI-E Max Link Width x16
Memory Type DDR2
Memory Size 1024 MBytes
Channels Single
Memory Frequency 366.9 MHz (3:5)
CAS# latency (CL) 5.0
RAS# to CAS# delay (tRCD) 6
RAS# Precharge (tRP) 6
Cycle Time (tRAS) 18
Bank Cycle Time (tRC) 21


Memory type DDR2
Module format Regular UDIMM
Size 1024 MBytes
Max bandwidth PC2-5300 (333 MHz)
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 3.0-3-3-9-12 @ 200 MHz
JEDEC #2 4.0-4-4-12-16 @ 266 MHz
JEDEC #3 5.0-5-5-15-20 @ 333 MHz

Display adapter 0
Name NVIDIA GeForce 7900 GT/GTO
Revision A2
Codename G71
Technology 90 nm
Memory size 256 MB
Memory bus width 256 bits
PCI device bus 4 (0x4), device 0 (0x0), function 0 (0x0)
Vendor ID 0x10DE (0x107D)
Model ID 0x0291 (0x2A62)
Performance Level Default
Core clock 450.0 MHz
Memory clock 660.0 MHz
Performance Level 3D Applications
Core clock 450.0 MHz
Memory clock 660.0 MHz

Hardware monitor Winbond W83627DHG
Voltage 0 1.27 Volts [0x9F] (CPU VCORE)
Voltage 1 1.84 Volts [0xE6] (VIN1)
Voltage 2 3.22 Volts [0xC9] (+3.3V)
Voltage 3 4.82 Volts [0xC9] (+5V)
Voltage 4 11.21 Volts [0xC9] (+12V)
Voltage 5 1.62 Volts [0xCB] (VIN5)
Voltage 6 1.60 Volts [0xC8] (VIN6)
Temperature 0 18°C (64°F) [0x12] (SYSTIN)
Temperature 1 38°C (100°F) [0x4C] (CPUTIN)
Temperature 2 7°C (44°F) [0xE] (AUXTIN)
Fan 0 4272 RPM [0x9E] (SYSFANIN)
Fan 1 2657 RPM [0x7F] (CPUFANIN0)

Hardware monitor NVIDIA NVAPI
Voltage 0 1.20 Volts [0x4B0] (VIN0)
Temperature 0 50°C (121°F) [0x32] (TMPIN0)
Fan PWM 0 40 pc [0x28] (FANPWMIN0)

Is there any OC i can do? Sometimes in games like BLUR i get some crashes, suddenly PC reboots. With the stock INTEL CPU Cooler i had to keep the CPU at 1.5Mhz @42-45C, now i got this Cooler and i can get up to 2.2Mhz@41-43C...
post #2 of 2
Thread Starter 
Can i please get an answer?!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel - General
Overclock.net › Forums › Intel › Intel - General › Overclock P5GC-MX/1333