Overclock.net › Forums › AMD › AMD CPUs › OCN... HELP ME IN OCI'NG PHENOM II X6...I'M STUCK !!!!!!
New Posts  All Forums:Forum Nav:

OCN... HELP ME IN OCI'NG PHENOM II X6...I'M STUCK !!!!!!

post #1 of 14
Thread Starter 
hello,
i'm overclocking phenom II x6 1090t and is getting a stable overclock ~3.9 ghz approximately....
cooling as mentioned in the sig rig is done by corsair H80..smile.gif
here"s some pic....
401
392
428

that"s the torture test that i ran and was stable at 3.893 ghz.....mad.gif
here"s a pic of idle temp...
395

maximum temp is nothing more than 53C..... rolleyes.gif

you all can see the multiplier and the bus frequency and all other stuff from the snap of cpu z....
now from all the problem starts.....

if i try to increase the multiplier from x17 to x17.5...after a test of around 5 to 6 min....a damn BSOD....ahh.. they sucks.....mad.gif

for a time period i changed the entire setting which are as follows....
ratio- x16
bus freq- 250
cpu frequ- 4000 mhz.....
Nb frequ- 2500 mhz....
and ht set at stock..........

ya forget to mention that all other stuff like c N q, c1e all are disabled.......
ram set at X6.66.....if any time the ram increased to x8.....again a BSOD....

what should i set at stock and what not.....what voltages....etc....

let me knoe if you want to know anything....
sorry for being so long but i"m in need of desperate help....

I BEG YOU friends to help me to eradicate my problem...
help thumb.gif
BLUE CARBIDE
(18 items)
 
  
CPUMotherboardGraphicsRAM
AMD PHENOM II BLACK EDITION X6 1090t GIGABYTE 890 FXA UD7 SAPPHIRE AMD RADEON HD6870 CORSAIR VENGEANCE 1600 2*4 gb 
Hard DriveHard DriveOptical DriveCooling
WD 7200 1tb CORSAIR FORCE GT  ASUS OPTICAL DRIVE CORSAIR H80 
CoolingOSKeyboardPower
COOLER MASTER R4 120 mm (7 fans) WINDOWS 7 64bit CORSAIR K60 CORSAIR GS800 
CaseMouseMouse PadAudio
CORSAIR CARBIDE 400R LOGITECH G400 CM STORM WEAPON OF CHOICE M4-DM ASUS XONAR DG 
AudioAudio
SENNHEISER HD 201 CM STORM SIRUS 
  hide details  
Reply
BLUE CARBIDE
(18 items)
 
  
CPUMotherboardGraphicsRAM
AMD PHENOM II BLACK EDITION X6 1090t GIGABYTE 890 FXA UD7 SAPPHIRE AMD RADEON HD6870 CORSAIR VENGEANCE 1600 2*4 gb 
Hard DriveHard DriveOptical DriveCooling
WD 7200 1tb CORSAIR FORCE GT  ASUS OPTICAL DRIVE CORSAIR H80 
CoolingOSKeyboardPower
COOLER MASTER R4 120 mm (7 fans) WINDOWS 7 64bit CORSAIR K60 CORSAIR GS800 
CaseMouseMouse PadAudio
CORSAIR CARBIDE 400R LOGITECH G400 CM STORM WEAPON OF CHOICE M4-DM ASUS XONAR DG 
AudioAudio
SENNHEISER HD 201 CM STORM SIRUS 
  hide details  
Reply
post #2 of 14
is the ram oc'ed
Bernice
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Athlon II X4 635 Foxconn Aloe 1.01 Radeon HD 4350 Kingston ddr3 2gb X3 
Optical DriveOSMonitorKeyboard
Light scribe Windows 7 Home Premium Asus VW246H, Dell 17" Hp stock 
CaseMouse
stock hp pavillion e9300z HP stock 
  hide details  
Reply
Bernice
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Athlon II X4 635 Foxconn Aloe 1.01 Radeon HD 4350 Kingston ddr3 2gb X3 
Optical DriveOSMonitorKeyboard
Light scribe Windows 7 Home Premium Asus VW246H, Dell 17" Hp stock 
CaseMouse
stock hp pavillion e9300z HP stock 
  hide details  
Reply
post #3 of 14
I have a little of issue reading, but since you overclock with the FSB, adjust the RAM and CPU-Nb accordingly.
i7 thing
(8 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 4770K 4.4Ghz @ 1.275v Asus Z87 PRO GTX 780 SLI 16GB DDR3 
Hard DriveCoolingPowerCase
128GB SX900 Adata SSD H105 Corsair TX750v2 NZXT Phantom 410 
  hide details  
Reply
i7 thing
(8 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 4770K 4.4Ghz @ 1.275v Asus Z87 PRO GTX 780 SLI 16GB DDR3 
Hard DriveCoolingPowerCase
128GB SX900 Adata SSD H105 Corsair TX750v2 NZXT Phantom 410 
  hide details  
Reply
post #4 of 14
Thread Starter 
first of all i hadn't even touched the ram...it is ruuning at x6.66 and as mentioned in my previous post if i increase the ram from x6.hh to x8 even at the stable overclock the system either freezes or a BSOD....

And ya also tell me that GPU overcloking can be a issue of unstability of my system...

Help..please help...
BLUE CARBIDE
(18 items)
 
  
CPUMotherboardGraphicsRAM
AMD PHENOM II BLACK EDITION X6 1090t GIGABYTE 890 FXA UD7 SAPPHIRE AMD RADEON HD6870 CORSAIR VENGEANCE 1600 2*4 gb 
Hard DriveHard DriveOptical DriveCooling
WD 7200 1tb CORSAIR FORCE GT  ASUS OPTICAL DRIVE CORSAIR H80 
CoolingOSKeyboardPower
COOLER MASTER R4 120 mm (7 fans) WINDOWS 7 64bit CORSAIR K60 CORSAIR GS800 
CaseMouseMouse PadAudio
CORSAIR CARBIDE 400R LOGITECH G400 CM STORM WEAPON OF CHOICE M4-DM ASUS XONAR DG 
AudioAudio
SENNHEISER HD 201 CM STORM SIRUS 
  hide details  
Reply
BLUE CARBIDE
(18 items)
 
  
CPUMotherboardGraphicsRAM
AMD PHENOM II BLACK EDITION X6 1090t GIGABYTE 890 FXA UD7 SAPPHIRE AMD RADEON HD6870 CORSAIR VENGEANCE 1600 2*4 gb 
Hard DriveHard DriveOptical DriveCooling
WD 7200 1tb CORSAIR FORCE GT  ASUS OPTICAL DRIVE CORSAIR H80 
CoolingOSKeyboardPower
COOLER MASTER R4 120 mm (7 fans) WINDOWS 7 64bit CORSAIR K60 CORSAIR GS800 
CaseMouseMouse PadAudio
CORSAIR CARBIDE 400R LOGITECH G400 CM STORM WEAPON OF CHOICE M4-DM ASUS XONAR DG 
AudioAudio
SENNHEISER HD 201 CM STORM SIRUS 
  hide details  
Reply
post #5 of 14
Thread Starter 
seems like nobody is interested anymore here in OCN.....no more replies..
Ahhh.... I'm a bit disappointed now.....
I'm totally stock...
Help me out friends and let me know what i'm doing wrong in the entire process of oci'ng..
Help !!!!
BLUE CARBIDE
(18 items)
 
  
CPUMotherboardGraphicsRAM
AMD PHENOM II BLACK EDITION X6 1090t GIGABYTE 890 FXA UD7 SAPPHIRE AMD RADEON HD6870 CORSAIR VENGEANCE 1600 2*4 gb 
Hard DriveHard DriveOptical DriveCooling
WD 7200 1tb CORSAIR FORCE GT  ASUS OPTICAL DRIVE CORSAIR H80 
CoolingOSKeyboardPower
COOLER MASTER R4 120 mm (7 fans) WINDOWS 7 64bit CORSAIR K60 CORSAIR GS800 
CaseMouseMouse PadAudio
CORSAIR CARBIDE 400R LOGITECH G400 CM STORM WEAPON OF CHOICE M4-DM ASUS XONAR DG 
AudioAudio
SENNHEISER HD 201 CM STORM SIRUS 
  hide details  
Reply
BLUE CARBIDE
(18 items)
 
  
CPUMotherboardGraphicsRAM
AMD PHENOM II BLACK EDITION X6 1090t GIGABYTE 890 FXA UD7 SAPPHIRE AMD RADEON HD6870 CORSAIR VENGEANCE 1600 2*4 gb 
Hard DriveHard DriveOptical DriveCooling
WD 7200 1tb CORSAIR FORCE GT  ASUS OPTICAL DRIVE CORSAIR H80 
CoolingOSKeyboardPower
COOLER MASTER R4 120 mm (7 fans) WINDOWS 7 64bit CORSAIR K60 CORSAIR GS800 
CaseMouseMouse PadAudio
CORSAIR CARBIDE 400R LOGITECH G400 CM STORM WEAPON OF CHOICE M4-DM ASUS XONAR DG 
AudioAudio
SENNHEISER HD 201 CM STORM SIRUS 
  hide details  
Reply
post #6 of 14
in terms of the CPU OC since the BE use the multiplier and don't go over 1.55v's or 62c tempeture, thats usually how AMD BE's work don't forget to do the NB accordingly to the CPU OC like at 4ghz it'll be 3000mhz which you may need to bump the voltage one to two notches very rarely 3 notches. i've OC'd my 955 without touching the ram and with touching the ram and got no different results, i was able to stay stable on my 955 at around 4.1ghz at around 1.48v. of course mines a Deneb yours a Thuban but the OC proccess is the same and your Thuban has a better memory controller
JunkoXan's Build
(15 items)
 
   
CPUMotherboardGraphicsRAM
Intel 2700k (Engineering Sample) Asus P67 Sabertooth Sapphire Dual-X 280x G.Skill Sniper (2x4gb) 
Hard DriveCoolingOSMonitor
Samsung F3 Spinpoint Cooler Masters 616+ Windows 7 Upstar 20" 1080p TV 
MonitorKeyboardPowerCase
Dell Monitor 21" 1680x1050 Dell Keyboard Antec High Current Gamer 900W Cooler Master HAF-XB 
MouseMouse Pad
E-3lue Mazer II 2600DPI Optical Mouse Custom Made 
  hide details  
Reply
JunkoXan's Build
(15 items)
 
   
CPUMotherboardGraphicsRAM
Intel 2700k (Engineering Sample) Asus P67 Sabertooth Sapphire Dual-X 280x G.Skill Sniper (2x4gb) 
Hard DriveCoolingOSMonitor
Samsung F3 Spinpoint Cooler Masters 616+ Windows 7 Upstar 20" 1080p TV 
MonitorKeyboardPowerCase
Dell Monitor 21" 1680x1050 Dell Keyboard Antec High Current Gamer 900W Cooler Master HAF-XB 
MouseMouse Pad
E-3lue Mazer II 2600DPI Optical Mouse Custom Made 
  hide details  
Reply
post #7 of 14
Quote:
Originally Posted by henryy5ghz View Post

seems like nobody is interested anymore here in OCN.....no more replies..
Ahhh.... I'm a bit disappointed now.....
I'm totally stock...
Help me out friends and let me know what i'm doing wrong in the entire process of oci'ng..
Help !!!!

I'd be happy to assist you, some of us (me) don't always get as much time we'd like on here lol.
If you have your GPU OC'd return it to stock temporarily while OCing.
Looks like ram specs are manually entered, what is current Dram voltage?
What is current CPU/NB voltage.

A couple simple rules to use when stressing with prime95 are,
BSOD is usually a lack of Vcore
If you receive a "Worker Has Failed" error this is usually a lack of Dram voltage and/or CPU/NB voltage.

If you have freezing this is usually memory related (try increasing Dram voltage) It's not uncommon to have to add .05v to .1v to stock Dram voltage rated by manufacture for even stock dram freq.

Please clarify which OC you're using (229 x 17 or 250 x 16).

In the mean time have a look at this guide (in case you haven't seen it yet) as it does contain a lot of very good basic "How Too" OC http://www.overclock.net/t/525113/phenom-ii-overclocking-guide

My day starts very early so I won't see your reply till tomorrow, hang in there help is on the way lol.
Ryzen Build
(20 items)
 
 
Bruce
(14 items)
 
CPUMotherboardGraphicsRAM
R7 1800x Crosshair VI Hero Diamond 7970 GSkill FlareX F4-3200C14D-16GFX  
Hard DriveHard DriveHard DriveHard Drive
Samsung 960 EVO NVMe Samsung 840 SSD Corsair GT SSD WD 2TB Black 
Hard DriveCoolingCoolingCooling
WD 4TB Red EK-FB Asus C6H Monoblock XSPC GPU Razor WB XSPC RX 360 
CoolingCoolingCoolingCooling
XSPC RS 360 XSPC EX140 D5 Vario Gentle Typhoon AP-15 1850 rpm 
OSMonitorPowerCase
Win 10 Pro Asus VE248H x2 EVGA 850 G2 Xigmatek Elysium 
CPUMotherboardGraphicsRAM
FX 6350 Asus M5A99FX Pro R2.0 GTX220 G.Skill Ripjaws X F3-17000CL9D-8GBXLD 9-11-9-28... 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 Pro WD20EFRX 64M Red x4 raid 10 WD5001AALS Blk Asus DRW-24B1ST 
CoolingOSMonitorKeyboard
Hyper 212 Evo R2 Windows Server 2008 R2 Standard Asus  Logitech MK300 
PowerCase
Corsair HX500 Corsair 330R Titainium 
  hide details  
Reply
Ryzen Build
(20 items)
 
 
Bruce
(14 items)
 
CPUMotherboardGraphicsRAM
R7 1800x Crosshair VI Hero Diamond 7970 GSkill FlareX F4-3200C14D-16GFX  
Hard DriveHard DriveHard DriveHard Drive
Samsung 960 EVO NVMe Samsung 840 SSD Corsair GT SSD WD 2TB Black 
Hard DriveCoolingCoolingCooling
WD 4TB Red EK-FB Asus C6H Monoblock XSPC GPU Razor WB XSPC RX 360 
CoolingCoolingCoolingCooling
XSPC RS 360 XSPC EX140 D5 Vario Gentle Typhoon AP-15 1850 rpm 
OSMonitorPowerCase
Win 10 Pro Asus VE248H x2 EVGA 850 G2 Xigmatek Elysium 
CPUMotherboardGraphicsRAM
FX 6350 Asus M5A99FX Pro R2.0 GTX220 G.Skill Ripjaws X F3-17000CL9D-8GBXLD 9-11-9-28... 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 Pro WD20EFRX 64M Red x4 raid 10 WD5001AALS Blk Asus DRW-24B1ST 
CoolingOSMonitorKeyboard
Hyper 212 Evo R2 Windows Server 2008 R2 Standard Asus  Logitech MK300 
PowerCase
Corsair HX500 Corsair 330R Titainium 
  hide details  
Reply
post #8 of 14
Thread Starter 
Quote:
Originally Posted by The Sandman View Post

I'd be happy to assist you, some of us (me) don't always get as much time we'd like on here lol.
If you have your GPU OC'd return it to stock temporarily while OCing.
Looks like ram specs are manually entered, what is current Dram voltage?
What is current CPU/NB voltage.
A couple simple rules to use when stressing with prime95 are,
BSOD is usually a lack of Vcore
If you receive a "Worker Has Failed" error this is usually a lack of Dram voltage and/or CPU/NB voltage.
If you have freezing this is usually memory related (try increasing Dram voltage) It's not uncommon to have to add .05v to .1v to stock Dram voltage rated by manufacture for even stock dram freq.
Please clarify which OC you're using (229 x 17 or 250 x 16).
In the mean time have a look at this guide (in case you haven't seen it yet) as it does contain a lot of very good basic "How Too" OC http://www.overclock.net/t/525113/phenom-ii-overclocking-guide
My day starts very early so I won't see your reply till tomorrow, hang in there help is on the way lol.

thanks for a good reply...
well i HADN"T touched ram timings at all...
oc is like this 229*17.....
i was saying that i was not stable at 250*16......and ya i also got one error in prime saying the same ....worker has stop ......
okk... if got more problems will contact you....
and ya what nb volt and dram volt to use.... smile.gif
EDIT :
current nb volt - 1.29v
and DRAM VOLT - 1.57v
and ht v - 1.26v
as said i was stable at 17*229......
but when i ran 250*16...... nostability...a bsod....
here"s some pic....
392
392

after running prime 95 for 2 hours it as stable but not anymore......
also nb and ht link are at stock...... 2500 mhz...

help and please reply...
Edited by henryy5ghz - 3/21/12 at 1:57am
BLUE CARBIDE
(18 items)
 
  
CPUMotherboardGraphicsRAM
AMD PHENOM II BLACK EDITION X6 1090t GIGABYTE 890 FXA UD7 SAPPHIRE AMD RADEON HD6870 CORSAIR VENGEANCE 1600 2*4 gb 
Hard DriveHard DriveOptical DriveCooling
WD 7200 1tb CORSAIR FORCE GT  ASUS OPTICAL DRIVE CORSAIR H80 
CoolingOSKeyboardPower
COOLER MASTER R4 120 mm (7 fans) WINDOWS 7 64bit CORSAIR K60 CORSAIR GS800 
CaseMouseMouse PadAudio
CORSAIR CARBIDE 400R LOGITECH G400 CM STORM WEAPON OF CHOICE M4-DM ASUS XONAR DG 
AudioAudio
SENNHEISER HD 201 CM STORM SIRUS 
  hide details  
Reply
BLUE CARBIDE
(18 items)
 
  
CPUMotherboardGraphicsRAM
AMD PHENOM II BLACK EDITION X6 1090t GIGABYTE 890 FXA UD7 SAPPHIRE AMD RADEON HD6870 CORSAIR VENGEANCE 1600 2*4 gb 
Hard DriveHard DriveOptical DriveCooling
WD 7200 1tb CORSAIR FORCE GT  ASUS OPTICAL DRIVE CORSAIR H80 
CoolingOSKeyboardPower
COOLER MASTER R4 120 mm (7 fans) WINDOWS 7 64bit CORSAIR K60 CORSAIR GS800 
CaseMouseMouse PadAudio
CORSAIR CARBIDE 400R LOGITECH G400 CM STORM WEAPON OF CHOICE M4-DM ASUS XONAR DG 
AudioAudio
SENNHEISER HD 201 CM STORM SIRUS 
  hide details  
Reply
post #9 of 14
Have you tried just using the multiplier and not the FBS? When I clocked mine up I used the multi to get to my highest setting and then edged it upwards with FBS and volts.

Like you are doing already, leave your ram alone until you have a stable clock. I have the same chip as you (granted they are binned different) but I was able to get it stable to 4.2Ghz doing it that way. I just put it back under water but I haven't had the time to mess with it yet.
MellaMonster
(14 items)
 
MellaWork
(8 items)
 
 
CPUMotherboardGraphicsRAM
1090T Gigabyte 890FX UD5 Asus 5870 4GB MushkinRidgebacks 
Hard DriveCoolingOSMonitor
1.5TB Black VRaptorx2 Raid 0 60OCZ Vertex EK Supreme Windows 7 x64bit 2xSamsung 23' 
PowerCase
Corsair 850HX HAF 932 
CPUMotherboardGraphicsRAM
i5 760 EVGA P55 Zotac 9800 Patriot 8GB 
Hard DriveOSPowerCase
1.5 Black + Green win7 650W Corsair MiniCase 
  hide details  
Reply
MellaMonster
(14 items)
 
MellaWork
(8 items)
 
 
CPUMotherboardGraphicsRAM
1090T Gigabyte 890FX UD5 Asus 5870 4GB MushkinRidgebacks 
Hard DriveCoolingOSMonitor
1.5TB Black VRaptorx2 Raid 0 60OCZ Vertex EK Supreme Windows 7 x64bit 2xSamsung 23' 
PowerCase
Corsair 850HX HAF 932 
CPUMotherboardGraphicsRAM
i5 760 EVGA P55 Zotac 9800 Patriot 8GB 
Hard DriveOSPowerCase
1.5 Black + Green win7 650W Corsair MiniCase 
  hide details  
Reply
post #10 of 14
Thread Starter 
will try out soon amd let you if anywhere i'm stable or not...
BLUE CARBIDE
(18 items)
 
  
CPUMotherboardGraphicsRAM
AMD PHENOM II BLACK EDITION X6 1090t GIGABYTE 890 FXA UD7 SAPPHIRE AMD RADEON HD6870 CORSAIR VENGEANCE 1600 2*4 gb 
Hard DriveHard DriveOptical DriveCooling
WD 7200 1tb CORSAIR FORCE GT  ASUS OPTICAL DRIVE CORSAIR H80 
CoolingOSKeyboardPower
COOLER MASTER R4 120 mm (7 fans) WINDOWS 7 64bit CORSAIR K60 CORSAIR GS800 
CaseMouseMouse PadAudio
CORSAIR CARBIDE 400R LOGITECH G400 CM STORM WEAPON OF CHOICE M4-DM ASUS XONAR DG 
AudioAudio
SENNHEISER HD 201 CM STORM SIRUS 
  hide details  
Reply
BLUE CARBIDE
(18 items)
 
  
CPUMotherboardGraphicsRAM
AMD PHENOM II BLACK EDITION X6 1090t GIGABYTE 890 FXA UD7 SAPPHIRE AMD RADEON HD6870 CORSAIR VENGEANCE 1600 2*4 gb 
Hard DriveHard DriveOptical DriveCooling
WD 7200 1tb CORSAIR FORCE GT  ASUS OPTICAL DRIVE CORSAIR H80 
CoolingOSKeyboardPower
COOLER MASTER R4 120 mm (7 fans) WINDOWS 7 64bit CORSAIR K60 CORSAIR GS800 
CaseMouseMouse PadAudio
CORSAIR CARBIDE 400R LOGITECH G400 CM STORM WEAPON OF CHOICE M4-DM ASUS XONAR DG 
AudioAudio
SENNHEISER HD 201 CM STORM SIRUS 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › OCN... HELP ME IN OCI'NG PHENOM II X6...I'M STUCK !!!!!!