Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › My First Water Loop
New Posts  All Forums:Forum Nav:

My First Water Loop - Page 2

post #11 of 13
Thread Starter 
Quote:
Originally Posted by _s3v3n_ View Post

Very nice build, mate! Post your full load temps here when you get a chance.

Thanks a lot. smile.gif
I tried to run Prime95 and FurMark, but it just crashed every time. mad.gif I think it's an AMD video driver problem because one cpu core gets pegged to 100% usage. Oh well, I ran a half an hour of Prime95 blend. The first 20 minutes were with the fans at low speed, then I turned them up for the last 10 minutes. This screenshot shows the maximum temperatures, and the current temps were after the 10 minutes of full speed fans. Power draw was at 240 W, then up to 255 W in the last 10 minutes, fans need juice too!! wink.gif
375
post #12 of 13
Im in the process of learning to water cool my rig
post #13 of 13
Thread Starter 
Quote:
Originally Posted by JeffBuildPCs View Post

Im in the process of learning to water cool my rig

HERE is a link to a lot of information about water cooling. It should give you a starting point, if you haven't found one already. biggrin.gif Good luck!!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Build Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › My First Water Loop