Originally Posted by Ken1649
Do you happen to know if the monitor is receiving 133Hz or just the limit of the graphics card? And does it play well with the games at that refresh rate? And if you don't mind to upload the monitor .inf of this 133Hz?
The highest I actually use to "Play" is around 124hz because it's fully perfect without any issues even after extended periods. Why 124 and not just 120hz? Well..as we go up higher, it has trouble actually putting out the refresh rate it's supposed to. For example, a 120hz display will put out 119-121hz. But this monitor, set to 120hz, will put out 115-119hz. So by going up to 123-124hz, I end up with an active 119hz-121hz.
And yes, the refresh rate will act and behave properly, IF you follow the OC guide in my signature below. Otherwise half of your games will revert back to 60hz when you play them. The limitation, even at 537mhz pixel clock didn't come from the card. At that refresh rate, your horizontal refresh rate is at 199khz. It's the 200khz which is the limit (I'm assuming from the PCB...because even at 200khz...that's ridiculously high. lol). But realistically...running a 60hz panel at nearly 222% of its stated specifications is scary. It follows the standard rule of Overclocking. Find your maximum OC, then bring it down a bit for long-term stability.
As for the inf, I already mentioned going through my youtube guide linked in my sig! There is a downloadable package in the video description that contains all tools and drivers, along with video guidance on how to use them. So don't worry about anything. Just get your hands on a B series monitor and you'll be set. Edited by HyperMatrix - 4/17/12 at 5:54am