Originally Posted by Ronsanut
I am using the DEMC filters. I pull back the self adhesive in a couple of areas for the magnetic strip and apply directly to the fan mounted inside the fan flex bay. I guess I could have applied to the inside of the flex bay. That is only for the intake fans I have in the front of my STH10. Works great, but does require a little work to pull them off. I plan on getting a good hand held vacum.
By the way I received my second SR1 560 this morning and will be working on it all day and have it installed by tonight hopefully, by the measurement I should have 150mm of space between each radiator and even more space between each radiators inlet/outlet ports. I'm not sure yet how I want the pluming done.
Sadly enough I'm allergic to dust and am going to buy a medium volume high PSI compressor so I can take my loop outside and blow it to hell while using fan filters, I want to custom attach a magnetic filter net to the entire intake panel on my STH10 in lower radiator chamber so I only have to remove and clean just the panel and not each individual fan filter.
Perhaps Case Labs can come up with something similar, I'll shoot them an email and see if that's something that they might want to add as an accessory. I'm going to start the assembly of my GT15 fans and mount them to the 120 -> 140 fan adapters, this is time consuming because I have to use the weather stripping in certain areas and it has to be precise as I don't want to much of the sticky side exposed or else it will heavily attract dust!
I'll update later tonight.