Originally Posted by drserk
My 27qd led came today. But there is a problem. when i worked it at first i saw the windows start screen. after that the screen got black and monitor looks like continuesly restarting and led is turning blue to red and red to blue.. and it stil turning with black and grey screen...
it happens like that: led is blue but for a second it turns to red... Monitor is some working and after stops while there is a sound like '' tik'' from power adaptor and back of the monitor.
and it looks like in sleeping mode...maybe problem is about panel
is there anything wrong i did?
I've seen this exact problem on computers that cannot output 2560x1440 resolution. Can you see the BIOS screen when you boot-up? What is your GPU?
Also, I got my second CrossOver from AW today. I bought it on the 22nd, and it arrived at my door in NY on the 26th. It arrived with decent bubble wrap packing on the outside. The inside was well protected.
I bought the non-pivot non-perfect pixel version. No stuck or dead pixels and it's working perfectly with my GTX 550 Ti. (Yeah it's old, but I don't play games.)
In terms of exterior, it appears almost identical to the pivot version I got from dcsamsungmall in March (aside from the stand of course). The only interesting difference is that the DVI and power input ports are on located on opposite sides. By this I mean the DVI is to the left of the power input on the pivot. It is to the right of the power input on my AccessoriesWhole one. Perhaps that indicates a difference board revision?
The AW version was noticeably yellow when initially plugged in. (Not the yellow corner issues people have been reporting. The whole monitor itself had a nasty yellow tint.) My older CrossOver was calibrated with nVidia's control panel. I tried getting my new CrossOver to match the cool-blue calibration colors I had on the other one without success. Instead I ended up using Windows 8 built in display color settings calibration option and now both appear virtually identical to my eyes.
Some of my coworkers bought the pivot version but ended up using their own mount. They are giving me one of the pivot ones they took off, and I'll post pictures of the dual setup as soon as I replace the non-pivot stand.Edited by lionelhuts - 12/27/12 at 12:56pm