My CrossOver just died. I smelled it and I'm not sure if I smelled anything burning or if it was my imagination.
The screen goes black and then has a little light to the black. The two YouTube videos show the problem. The red power button flash blue and then back to red. There's an audible clicking for the monitor.
The screen did this for about 20 or 30 seconds then it worked fine for about 10-20 seconds then repeated. After about 5 cycles of this, it is now permanently clicking / flicking on the black screen.
I have an Asus as the second monitor. It works and I can move the mouse on to this screen and off it but nothing on the main screen. Windows is still working, I rebooted and go to the BIOS start in safe mode screen but the monitor did this again. The monitor worked for about a week and In using a Gigabyte GTX 670.
I bought from AccessoriesWhole (AW) on eBay.
Any ideas on what this might be?
Edit: I tested the DVI cable on another monitor and it worked fine, I'm thinking power brick or internal hardware.Edited by davidh304 - 1/27/13 at 6:36pm