Overclock.net › Forums › Components › Monitors and Displays › CrossOver 27Q LED/LED-P, 27M LED, & 2720MDP GOLD LED Monitor Club
New Posts  All Forums:Forum Nav:

CrossOver 27Q LED/LED-P, 27M LED, & 2720MDP GOLD LED Monitor Club - Page 569

post #5681 of 6483
Quote:
Originally Posted by Wiz33 View Post

I have a 2720MDP so it might be different. I took off the 4 screws holding the panel to the stand. Then there are 4 more screws on the bottom in the back that I removed. After all that. The front and back was still held tightly together. I have to use a wide blade screw driver along the gap to open it a bit and then stick in a wider piece of hard plastic and twist. then I get a small pop and the closest attachment pins opened up. then I move to the next tight spot and do the same going completely around the unit. Once you have loosen all the attachment point (6-7 along the long edge and 4-5 along the short edge) then you can remove the front. The LCD panel is attached to the back half at 4 places (2 on each side). Just pull on the edge and lift that side of the panel up, repeat on other side and now the panel is loose. lift the panel slowly and detach the 2 cable that's connected to it, then you can remove it completely. You will then see all the cables comes from a portion that's covered by a piece of sheet metal. Remove the screws and lift it off, you should then see all the PCBs.

I ended up figuring it out after scratching my head a little but.

Something weird I did find was that I had a screw missing on the inside of my monitor. It is one of the screws that I assume holds down the cover to the inverter? It is the board at the top of the monitor.

I already e-mailed the seller about it so we will see what they say. I am kinda pissed about it.

When I see stuff like that it makes me wonder what else could go wrong.
post #5682 of 6483
I recieved my monitor today from allkillsale There are some problems. Is this normal backlight bleed and how many stuck pixels is that? http://imgur.com/a/irGD6
post #5683 of 6483
Quote:
Originally Posted by Feild Scarecrow View Post

I recieved my monitor today from allkillsale There are some problems. Is this normal backlight bleed and how many stuck pixels is that? http://imgur.com/a/irGD6

 

Stuck pixel, find a soft cloth and damp it with water. Try to rub it with the cloth with your finger nail gently. If you can't fix it. Maybe ask for replacement.

 
≡ Snowbaru ≡
(17 items)
 
 
CPUMotherboardGraphicsGraphics
Core i7 3930K 4.9Ghz Asus Sabertooth X79 EVGA GTX TITAN 1250Mhz KPE/Hybrid BIOS (SOLD) NVIDIA Geforce GTX 1080 Ti Founder Edition 
RAMHard DriveHard DriveHard Drive
32GB Samsung 30nm 2400Mhz OCZ Vertex 4 Samsung 850 EVO 13000GB HDDs 
CoolingOSMonitorKeyboard
EKWB Custom Watercooling, XSPC, Bitpower, Primo... Windows 10 Pro x64 (1607) ASUS PG278Q G-SYNC (2560x1440) Logitech G910 Onion Spark 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 850G2 Gold Fractal Design Define S Logitech G502 Logitech G440 
AudioOtherOtherOther
Logitech G933 Xbox One Controller Asus RT-AC68U Hitron CDA3 
CPUCPUMotherboardGraphics
5HP 5HP 5HP 5HP 
RAMHard DriveOptical DriveCooling
5HP 5HP 5HP 5HP 
OSMonitorKeyboardPower
5HP 5HP 5HP 5HP 
CaseMouseMouse PadAudio
5HP 5HP 5HP 5HP 
Other
5HP 
  hide details  
Reply
 
≡ Snowbaru ≡
(17 items)
 
 
CPUMotherboardGraphicsGraphics
Core i7 3930K 4.9Ghz Asus Sabertooth X79 EVGA GTX TITAN 1250Mhz KPE/Hybrid BIOS (SOLD) NVIDIA Geforce GTX 1080 Ti Founder Edition 
RAMHard DriveHard DriveHard Drive
32GB Samsung 30nm 2400Mhz OCZ Vertex 4 Samsung 850 EVO 13000GB HDDs 
CoolingOSMonitorKeyboard
EKWB Custom Watercooling, XSPC, Bitpower, Primo... Windows 10 Pro x64 (1607) ASUS PG278Q G-SYNC (2560x1440) Logitech G910 Onion Spark 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 850G2 Gold Fractal Design Define S Logitech G502 Logitech G440 
AudioOtherOtherOther
Logitech G933 Xbox One Controller Asus RT-AC68U Hitron CDA3 
CPUCPUMotherboardGraphics
5HP 5HP 5HP 5HP 
RAMHard DriveOptical DriveCooling
5HP 5HP 5HP 5HP 
OSMonitorKeyboardPower
5HP 5HP 5HP 5HP 
CaseMouseMouse PadAudio
5HP 5HP 5HP 5HP 
Other
5HP 
  hide details  
Reply
post #5684 of 6483
Purchased a pixel perfect 27QD blade from dream-seller. Box arrived beat to hell, with an actual hole in the side of it. But once I opened it I saw that the monitor itself was undamaged and perfectly fine. No dead or stuck pixels, no back light bleed (though black levels in general are pretty horrid) and no hum or whine. At first I was underwhelmed when I was just looking at the desktop and web browser, but once I fired up some games and played some videos I understood what everyone has been raving about. The only thing I don't like is the stand. I'll try playing with it again to see if I can make it more stable, but right now its way too wobbly. If I end up getting an Ergotron or something like that, can I remove that clear plastic stem part that goes into the stand? If so, how do you get it off the back of the monitor?
post #5685 of 6483
Quote:
Originally Posted by Voidman View Post

Purchased a pixel perfect 27QD blade from dream-seller. Box arrived beat to hell, with an actual hole in the side of it. But once I opened it I saw that the monitor itself was undamaged and perfectly fine. No dead or stuck pixels, no back light bleed (though black levels in general are pretty horrid) and no hum or whine. At first I was underwhelmed when I was just looking at the desktop and web browser, but once I fired up some games and played some videos I understood what everyone has been raving about. The only thing I don't like is the stand. I'll try playing with it again to see if I can make it more stable, but right now its way too wobbly. If I end up getting an Ergotron or something like that, can I remove that clear plastic stem part that goes into the stand? If so, how do you get it off the back of the monitor?

You can buy the better pivot stand on Ebay right now for $89.99. There are other Vesa stand though for cheaper.

To remove that clear plastic stem you have to take apart the monitor.
post #5686 of 6483
Quote:
Originally Posted by djriful View Post

Stuck pixel, find a soft cloth and damp it with water. Try to rub it with the cloth with your finger nail gently. If you can't fix it. Maybe ask for replacement.
Tried it to no avail, They seem dead with no light coming off of them.
post #5687 of 6483
Does anyone have a link to download a huge package of 2560x1440p images I have found lots of 1080p ones but no 1440p large packages.
post #5688 of 6483
Quote:
Originally Posted by Feild Scarecrow View Post

Does anyone have a link to download a huge package of 2560x1440p images I have found lots of 1080p ones but no 1440p large packages.

Wallbase(.)cc is your friend if you're browsing for wallpapers
Kaga (WIP)
(22 items)
 
   
GraphicsRAMMonitorPower
1080Ti x2 32GB Corsair Dominator Platinum 2666 (64GB Total) Acer Predator X34P or Equivalent Seasonic Snow Silent - 1050w 
OtherOtherOther
Custom Acrylic Engraving Straight 8 Pin cables + Cable Combs 3x EK-Vardar F2, 2x Replacement Front 140mm 
  hide details  
Reply
Kaga (WIP)
(22 items)
 
   
GraphicsRAMMonitorPower
1080Ti x2 32GB Corsair Dominator Platinum 2666 (64GB Total) Acer Predator X34P or Equivalent Seasonic Snow Silent - 1050w 
OtherOtherOther
Custom Acrylic Engraving Straight 8 Pin cables + Cable Combs 3x EK-Vardar F2, 2x Replacement Front 140mm 
  hide details  
Reply
post #5689 of 6483
Pretty sure I am about to order a crossover from accesorieswhole(seems like the best choice)
but I just wanted to know if the crossover can go lower than it's native resolution?
Also should I buy a multi-input one or stick with a single input due to decreased input lag?
post #5690 of 6483
Quote:
Originally Posted by SICO94 View Post

Pretty sure I am about to order a crossover from accesorieswhole(seems like the best choice)
but I just wanted to know if the crossover can go lower than it's native resolution?
Also should I buy a multi-input one or stick with a single input due to decreased input lag?

If you mean play at different resolutions other than 2560x1440? The answer is yes on a PC, I'm not enitrely sure about consoles however but I'm tempted to lean towards a yes as well.

You're not going to notice multi vs single input as much as people say in reality, buy the model that looks best to you.
Kaga (WIP)
(22 items)
 
   
GraphicsRAMMonitorPower
1080Ti x2 32GB Corsair Dominator Platinum 2666 (64GB Total) Acer Predator X34P or Equivalent Seasonic Snow Silent - 1050w 
OtherOtherOther
Custom Acrylic Engraving Straight 8 Pin cables + Cable Combs 3x EK-Vardar F2, 2x Replacement Front 140mm 
  hide details  
Reply
Kaga (WIP)
(22 items)
 
   
GraphicsRAMMonitorPower
1080Ti x2 32GB Corsair Dominator Platinum 2666 (64GB Total) Acer Predator X34P or Equivalent Seasonic Snow Silent - 1050w 
OtherOtherOther
Custom Acrylic Engraving Straight 8 Pin cables + Cable Combs 3x EK-Vardar F2, 2x Replacement Front 140mm 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Monitors and Displays
Overclock.net › Forums › Components › Monitors and Displays › CrossOver 27Q LED/LED-P, 27M LED, & 2720MDP GOLD LED Monitor Club