Dont get me wrong i did not even try one game i was talking about 3dfm and not just 3d11.
its does not stand a chance against a cooled down 448 ti in older fm dx9 bench with latest w7 or xp disk drivers.

Quote:
Originally Posted by
BababooeyHTJ 
Damn, I would have thought that cold would help. When you mounted the H70 were you able to use the stock heatsink with it?
Yeah me too it always works.
i did not try to use the stock parts i took it off in one piece,vrm is cool to the touch but it only takes a few heatsinks and direct airflow to get the vrm cooled.
Quote:
Originally Posted by
GoldenTiger 
Had you physically volt-modded the card, or were you still using stock other than the cooling? Thanks for the post.
That ss i posted was with just a 5x 5x piece of dry ice 3 inches thick on shop towels covering the stock heatsink intake for the fan.
I had a pot on the other but it cb on me at -22c and was wet after i got it back down but 0% increase while -0c -20c so i was miffed a tad,that card has the h70 on it now.
I dont want to deface my cards in anyway now but i know tin @kingpincooling has cb,vid mods and adding some parts they did not think necessary for the card that i may try later
I might just try shams hot wire mod since i have mb to do that on and will report back later if i get it done.

Edited by cowie - 3/25/12 at 8:29am