Overclock.net › Forums › AMD › AMD CPUs › Serious help needed - Memory/CPU clocking
New Posts  All Forums:Forum Nav:

Serious help needed - Memory/CPU clocking - Page 4

post #31 of 48
Thread Starter 
Ok thanks I'll give it a try
post #32 of 48
Thread Starter 
Still seems dodgey with increased CPU-NB... took it to 1.5 (and still not stable!)

Help!! haha

Maybe my chip doesn't like me?

James
post #33 of 48
have your turn off the turbo
post #34 of 48
Thread Starter 
I believe so, how do I check?
post #35 of 48
it will be in your bios turn off any over colcoking things
post #36 of 48
Thread Starter 
I'm just trying the 4.8 overclock just using multiplyer. Seems happier at lower voltages. Is there a significant performance drop if just using the multi?
post #37 of 48
Thread Starter 
One thing that I have noticed - It seems that the voltage seems to keep fluctuating a little. Going between 1.41 and 1.48 all the time. Could this be a coincidence or the issue itself I wonder?
post #38 of 48
not at all each chip is diffrent and 4.8 is a very good over clock
post #39 of 48
Thread Starter 
Well it just seems strange. Voltage keeps fluctuating and the CPU cores in CPU-Z keep going from 4.73 to 4.1 and back again. Never seemed to do it before.....
post #40 of 48
that is the turbo it ramps down when not under load and ramps back up when under load
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › Serious help needed - Memory/CPU clocking