Overclock.net › Forums › Cooling › Water Cooling › Are my temps high?
New Posts  All Forums:Forum Nav:

Are my temps high? - Page 2

post #11 of 25
What pump do u have?
There is a lot of rads and components there so i think that pump might be stressed too much... and also your CPU temps seem fine to me (i never OC those i7 so don't take my word for it), but the gpu-s are a but high i think...
U have more than enough rads there, so don't worry about that...

Also can u feel rads getting hot on touch?
Best place to feel it is opposite side of the rad from the side where ur inlet and outlet goes in (side of the rad, not top or the bottom).
Let me mark it on this photo wink.gif

450

If they do get hot u will need more fans, or stronger ones i guess.

EDIT: I just looked at ur build log and it cant be the pump...stupid of me not to see that build log before posting...hehe
Edited by Rops84 - 3/26/12 at 4:34am
Zeus
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 5 Ghz @ 1.488 V 24/7 Asrock p67 extreme 4 B3 Gainward GTX 570 GS GLH @ 850/2100 @ 1.00V 2x4 Gb G:SKILL Sniper @ 1600 9-9-9-24 t1 @ 1.260 V 
Hard DriveOptical DriveCoolingCooling
RAID-2xWD Sata3 Blue 500 Gb + 1xWD Sata3 Green 2TB none RAD: EK XTC 420 CPU Block: EK-Supreme HF - Full Nickel-EN 
CoolingOSMonitorKeyboard
GPU Block: EK Universal EN Win7 Professional 64Bit LG Flatron M2362D 23"[1920x1080] Steelseries 6GV2 
PowerCaseMouseMouse Pad
XFX PRO 550W CoolerMaster CM690 II Nvidia Edition Razer DeathAdder 3500Dpi Left hand edition Razer Goliathus Speed 
  hide details  
Reply
Zeus
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 5 Ghz @ 1.488 V 24/7 Asrock p67 extreme 4 B3 Gainward GTX 570 GS GLH @ 850/2100 @ 1.00V 2x4 Gb G:SKILL Sniper @ 1600 9-9-9-24 t1 @ 1.260 V 
Hard DriveOptical DriveCoolingCooling
RAID-2xWD Sata3 Blue 500 Gb + 1xWD Sata3 Green 2TB none RAD: EK XTC 420 CPU Block: EK-Supreme HF - Full Nickel-EN 
CoolingOSMonitorKeyboard
GPU Block: EK Universal EN Win7 Professional 64Bit LG Flatron M2362D 23"[1920x1080] Steelseries 6GV2 
PowerCaseMouseMouse Pad
XFX PRO 550W CoolerMaster CM690 II Nvidia Edition Razer DeathAdder 3500Dpi Left hand edition Razer Goliathus Speed 
  hide details  
Reply
post #12 of 25
Thread Starter 
MCP655 with EK top. The air that's being expelled from the rads is warm, and the radiator feels touch warm also. I'm pretty sure I need stronger fans, and these Yate Loons low speed are just not cutting it. Too bad I ran out of cash, lol.
post #13 of 25
YY, sounds like u do need stronger fans...rads should not be warm like that...
But if ur components don't overheat ur fine with that temps...when u decide to get a stronger PSU and u start OC maybe than u can get faster fans... until than i don't think u really need them.

On my rig warm rads happens only when all the fans r off and under heavy load. But i have less Wattage in my system i guess...
Zeus
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 5 Ghz @ 1.488 V 24/7 Asrock p67 extreme 4 B3 Gainward GTX 570 GS GLH @ 850/2100 @ 1.00V 2x4 Gb G:SKILL Sniper @ 1600 9-9-9-24 t1 @ 1.260 V 
Hard DriveOptical DriveCoolingCooling
RAID-2xWD Sata3 Blue 500 Gb + 1xWD Sata3 Green 2TB none RAD: EK XTC 420 CPU Block: EK-Supreme HF - Full Nickel-EN 
CoolingOSMonitorKeyboard
GPU Block: EK Universal EN Win7 Professional 64Bit LG Flatron M2362D 23"[1920x1080] Steelseries 6GV2 
PowerCaseMouseMouse Pad
XFX PRO 550W CoolerMaster CM690 II Nvidia Edition Razer DeathAdder 3500Dpi Left hand edition Razer Goliathus Speed 
  hide details  
Reply
Zeus
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 5 Ghz @ 1.488 V 24/7 Asrock p67 extreme 4 B3 Gainward GTX 570 GS GLH @ 850/2100 @ 1.00V 2x4 Gb G:SKILL Sniper @ 1600 9-9-9-24 t1 @ 1.260 V 
Hard DriveOptical DriveCoolingCooling
RAID-2xWD Sata3 Blue 500 Gb + 1xWD Sata3 Green 2TB none RAD: EK XTC 420 CPU Block: EK-Supreme HF - Full Nickel-EN 
CoolingOSMonitorKeyboard
GPU Block: EK Universal EN Win7 Professional 64Bit LG Flatron M2362D 23"[1920x1080] Steelseries 6GV2 
PowerCaseMouseMouse Pad
XFX PRO 550W CoolerMaster CM690 II Nvidia Edition Razer DeathAdder 3500Dpi Left hand edition Razer Goliathus Speed 
  hide details  
Reply
post #14 of 25
it looks like in the pic you have the loop going

pump > rad > gpu > gpu > cpu> rad

maybe try sticking the top rad in between the gpu's and cpu. you're dumping all that heat from your gpu's onto your cpu.
Phantom Rig
(22 items)
 
  
CPUMotherboardGraphicsGraphics
Intel i7 980 ASUS P6X58D-E Zotac GTX 580 + Alphacool NexXxos Full-block Nvidia GTX 580 + Alphacool NexXxos Full-block 
RAMHard DriveHard DriveOptical Drive
3 x Corsair Dominator GT 1866MHz 2gig OCZ 120g Solid 3 SSD Sata III WD Caviar Black 2TB LG Blu Ray Burner 
CoolingCoolingCoolingOS
EK Supreme HF Custom Nickel Plate Black Ice GTX 360 EK 240  Windows 7 Ultimate x64 
MonitorMonitorMonitorKeyboard
AOC I2757FH  AOC I2757FH  AOC I2757FH  Rosewill Cherry MX-Redz 
PowerCaseMouseAudio
Ultra X3 850W NZXT Phantom White+ Custom mods + Blue LED Logitech G500 Creative Titanium HD 
Audio
Sennheiser HD 598 
  hide details  
Reply
Phantom Rig
(22 items)
 
  
CPUMotherboardGraphicsGraphics
Intel i7 980 ASUS P6X58D-E Zotac GTX 580 + Alphacool NexXxos Full-block Nvidia GTX 580 + Alphacool NexXxos Full-block 
RAMHard DriveHard DriveOptical Drive
3 x Corsair Dominator GT 1866MHz 2gig OCZ 120g Solid 3 SSD Sata III WD Caviar Black 2TB LG Blu Ray Burner 
CoolingCoolingCoolingOS
EK Supreme HF Custom Nickel Plate Black Ice GTX 360 EK 240  Windows 7 Ultimate x64 
MonitorMonitorMonitorKeyboard
AOC I2757FH  AOC I2757FH  AOC I2757FH  Rosewill Cherry MX-Redz 
PowerCaseMouseAudio
Ultra X3 850W NZXT Phantom White+ Custom mods + Blue LED Logitech G500 Creative Titanium HD 
Audio
Sennheiser HD 598 
  hide details  
Reply
post #15 of 25
"All the heat" from the GPUs would be less than 2C, reordering the loop won't significantly change CPU temps. It sounds like he's just not capable of dissipating enough heat at the moment, faster fans or more radiator is needed.
Primary System
(18 items)
 
  
CPUMotherboardGraphicsRAM
i7 860 Gigabyte P55A-UD4P 2x EVGA GTX460 2x 4gb Corsair Vengeance 
Hard DriveCoolingCoolingCooling
Samsung F4 XSPC Rasa cpu block 2x XSPC Razor 460 Black Ice GTX 360 
CoolingOSMonitorKeyboard
MCP-350 Windows 7 64bit Samsung SyncMaster SA300 23" Filco Majestouch "Otaku" Tenkeyless 
PowerCaseMouseAudio
Corsair TX850W v1 NZXT Whisper Logitech Performance MX Altec Lansing ATP3 
  hide details  
Reply
Primary System
(18 items)
 
  
CPUMotherboardGraphicsRAM
i7 860 Gigabyte P55A-UD4P 2x EVGA GTX460 2x 4gb Corsair Vengeance 
Hard DriveCoolingCoolingCooling
Samsung F4 XSPC Rasa cpu block 2x XSPC Razor 460 Black Ice GTX 360 
CoolingOSMonitorKeyboard
MCP-350 Windows 7 64bit Samsung SyncMaster SA300 23" Filco Majestouch "Otaku" Tenkeyless 
PowerCaseMouseAudio
Corsair TX850W v1 NZXT Whisper Logitech Performance MX Altec Lansing ATP3 
  hide details  
Reply
post #16 of 25
it worked for me with a similar loop. i had to turn the rad around which meant more cutting of the case but it was worth it. i have less rad and less fan speed since i dont do push pull, just one or the other until i get another fan controller. My temps sit at ~25 for each gpu and around ~30 for the cpu idle, ~50 gpu load ~55 cpu load.

450
Phantom Rig
(22 items)
 
  
CPUMotherboardGraphicsGraphics
Intel i7 980 ASUS P6X58D-E Zotac GTX 580 + Alphacool NexXxos Full-block Nvidia GTX 580 + Alphacool NexXxos Full-block 
RAMHard DriveHard DriveOptical Drive
3 x Corsair Dominator GT 1866MHz 2gig OCZ 120g Solid 3 SSD Sata III WD Caviar Black 2TB LG Blu Ray Burner 
CoolingCoolingCoolingOS
EK Supreme HF Custom Nickel Plate Black Ice GTX 360 EK 240  Windows 7 Ultimate x64 
MonitorMonitorMonitorKeyboard
AOC I2757FH  AOC I2757FH  AOC I2757FH  Rosewill Cherry MX-Redz 
PowerCaseMouseAudio
Ultra X3 850W NZXT Phantom White+ Custom mods + Blue LED Logitech G500 Creative Titanium HD 
Audio
Sennheiser HD 598 
  hide details  
Reply
Phantom Rig
(22 items)
 
  
CPUMotherboardGraphicsGraphics
Intel i7 980 ASUS P6X58D-E Zotac GTX 580 + Alphacool NexXxos Full-block Nvidia GTX 580 + Alphacool NexXxos Full-block 
RAMHard DriveHard DriveOptical Drive
3 x Corsair Dominator GT 1866MHz 2gig OCZ 120g Solid 3 SSD Sata III WD Caviar Black 2TB LG Blu Ray Burner 
CoolingCoolingCoolingOS
EK Supreme HF Custom Nickel Plate Black Ice GTX 360 EK 240  Windows 7 Ultimate x64 
MonitorMonitorMonitorKeyboard
AOC I2757FH  AOC I2757FH  AOC I2757FH  Rosewill Cherry MX-Redz 
PowerCaseMouseAudio
Ultra X3 850W NZXT Phantom White+ Custom mods + Blue LED Logitech G500 Creative Titanium HD 
Audio
Sennheiser HD 598 
  hide details  
Reply
post #17 of 25
Quote:
Originally Posted by LmG View Post

it worked for me with a similar loop. i had to turn the rad around which meant more cutting of the case but it was worth it. i have less rad and less fan speed since i dont do push pull, just one or the other until i get another fan controller. My temps sit at ~25 for each gpu and around ~30 for the cpu idle, ~50 gpu load ~55 cpu load.
450

What are your ambients? And overclock? I want those temps
Sovereign
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k Maximus V Gene HIS IceQ 7950 16gb Samsung  
Hard DriveCoolingOSMonitor
Samsung 840 120gb H80i Windows 7 x64 Benq XL2420T 
PowerCaseMouseMouse Pad
Seasonic 1000 Platinum TJ08e Mionix Naos 5000 Propus 380 
Audio
Creative ZxR 
  hide details  
Reply
Sovereign
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k Maximus V Gene HIS IceQ 7950 16gb Samsung  
Hard DriveCoolingOSMonitor
Samsung 840 120gb H80i Windows 7 x64 Benq XL2420T 
PowerCaseMouseMouse Pad
Seasonic 1000 Platinum TJ08e Mionix Naos 5000 Propus 380 
Audio
Creative ZxR 
  hide details  
Reply
post #18 of 25
Order of loop is not so important.
There is only some 0.2 C difference between the hottest and coldest part of the loop... especially with such a strong pump.
Zeus
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 5 Ghz @ 1.488 V 24/7 Asrock p67 extreme 4 B3 Gainward GTX 570 GS GLH @ 850/2100 @ 1.00V 2x4 Gb G:SKILL Sniper @ 1600 9-9-9-24 t1 @ 1.260 V 
Hard DriveOptical DriveCoolingCooling
RAID-2xWD Sata3 Blue 500 Gb + 1xWD Sata3 Green 2TB none RAD: EK XTC 420 CPU Block: EK-Supreme HF - Full Nickel-EN 
CoolingOSMonitorKeyboard
GPU Block: EK Universal EN Win7 Professional 64Bit LG Flatron M2362D 23"[1920x1080] Steelseries 6GV2 
PowerCaseMouseMouse Pad
XFX PRO 550W CoolerMaster CM690 II Nvidia Edition Razer DeathAdder 3500Dpi Left hand edition Razer Goliathus Speed 
  hide details  
Reply
Zeus
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 5 Ghz @ 1.488 V 24/7 Asrock p67 extreme 4 B3 Gainward GTX 570 GS GLH @ 850/2100 @ 1.00V 2x4 Gb G:SKILL Sniper @ 1600 9-9-9-24 t1 @ 1.260 V 
Hard DriveOptical DriveCoolingCooling
RAID-2xWD Sata3 Blue 500 Gb + 1xWD Sata3 Green 2TB none RAD: EK XTC 420 CPU Block: EK-Supreme HF - Full Nickel-EN 
CoolingOSMonitorKeyboard
GPU Block: EK Universal EN Win7 Professional 64Bit LG Flatron M2362D 23"[1920x1080] Steelseries 6GV2 
PowerCaseMouseMouse Pad
XFX PRO 550W CoolerMaster CM690 II Nvidia Edition Razer DeathAdder 3500Dpi Left hand edition Razer Goliathus Speed 
  hide details  
Reply
post #19 of 25
Quote:
Originally Posted by douglatins View Post

What are your ambients? And overclock? I want those temps

Right now my OC on the 950 is only 3.8. I'm pushing my psu to the max so I cant go any higher until I upgrade.
Ambients are sitting around ~19.
Phantom Rig
(22 items)
 
  
CPUMotherboardGraphicsGraphics
Intel i7 980 ASUS P6X58D-E Zotac GTX 580 + Alphacool NexXxos Full-block Nvidia GTX 580 + Alphacool NexXxos Full-block 
RAMHard DriveHard DriveOptical Drive
3 x Corsair Dominator GT 1866MHz 2gig OCZ 120g Solid 3 SSD Sata III WD Caviar Black 2TB LG Blu Ray Burner 
CoolingCoolingCoolingOS
EK Supreme HF Custom Nickel Plate Black Ice GTX 360 EK 240  Windows 7 Ultimate x64 
MonitorMonitorMonitorKeyboard
AOC I2757FH  AOC I2757FH  AOC I2757FH  Rosewill Cherry MX-Redz 
PowerCaseMouseAudio
Ultra X3 850W NZXT Phantom White+ Custom mods + Blue LED Logitech G500 Creative Titanium HD 
Audio
Sennheiser HD 598 
  hide details  
Reply
Phantom Rig
(22 items)
 
  
CPUMotherboardGraphicsGraphics
Intel i7 980 ASUS P6X58D-E Zotac GTX 580 + Alphacool NexXxos Full-block Nvidia GTX 580 + Alphacool NexXxos Full-block 
RAMHard DriveHard DriveOptical Drive
3 x Corsair Dominator GT 1866MHz 2gig OCZ 120g Solid 3 SSD Sata III WD Caviar Black 2TB LG Blu Ray Burner 
CoolingCoolingCoolingOS
EK Supreme HF Custom Nickel Plate Black Ice GTX 360 EK 240  Windows 7 Ultimate x64 
MonitorMonitorMonitorKeyboard
AOC I2757FH  AOC I2757FH  AOC I2757FH  Rosewill Cherry MX-Redz 
PowerCaseMouseAudio
Ultra X3 850W NZXT Phantom White+ Custom mods + Blue LED Logitech G500 Creative Titanium HD 
Audio
Sennheiser HD 598 
  hide details  
Reply
post #20 of 25
Quote:
Originally Posted by LmG View Post

Right now my OC on the 950 is only 3.8. I'm pushing my psu to the max so I cant go any higher until I upgrade.
Ambients are sitting around ~19.

Oi see, yesterday i got 61loads and 47 idles, but ambients were 30c
Sovereign
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k Maximus V Gene HIS IceQ 7950 16gb Samsung  
Hard DriveCoolingOSMonitor
Samsung 840 120gb H80i Windows 7 x64 Benq XL2420T 
PowerCaseMouseMouse Pad
Seasonic 1000 Platinum TJ08e Mionix Naos 5000 Propus 380 
Audio
Creative ZxR 
  hide details  
Reply
Sovereign
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k Maximus V Gene HIS IceQ 7950 16gb Samsung  
Hard DriveCoolingOSMonitor
Samsung 840 120gb H80i Windows 7 x64 Benq XL2420T 
PowerCaseMouseMouse Pad
Seasonic 1000 Platinum TJ08e Mionix Naos 5000 Propus 380 
Audio
Creative ZxR 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Are my temps high?