Overclock.net › Forums › Intel › Intel CPUs › internet problms caused by oc'ing
New Posts  All Forums:Forum Nav:

internet problms caused by oc'ing - Page 2

post #11 of 24
Thread Starter 
i did and my computer dosent send instructions when i up the voltage, and i got mem test and not even 5 minits and 5 errors AHHHHHHHHHH, this isint easy stuff, but its fun
Quad Maud!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q8200 @ 3.22 GHZ GIGABYTE GA-EP45-UD3P 9800GTX+ OCZ Reaper DDR2 1150 
Hard DriveOSMonitorKeyboard
250 Gig SeaGate Windows XP Pro Sony 17' LCD 1280x1024 Microsoft 
PowerMouse
Coolmax 650 Watt SLI Logitec 
  hide details  
Reply
Quad Maud!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q8200 @ 3.22 GHZ GIGABYTE GA-EP45-UD3P 9800GTX+ OCZ Reaper DDR2 1150 
Hard DriveOSMonitorKeyboard
250 Gig SeaGate Windows XP Pro Sony 17' LCD 1280x1024 Microsoft 
PowerMouse
Coolmax 650 Watt SLI Logitec 
  hide details  
Reply
post #12 of 24
after 1120 on the fsb with many 920's its 1.36V or above. Not sure if this differs much with the 950 due to the increased multiplier(I am only at 14X multiplier), I'd say it's somewhere between 1.31 and 1.35V.. May vary due to the mobo, but not sure. Good luck...
    
CPUMotherboardGraphicsRAM
G0 Quad @ 3.6Ghz P35C-DS3R EVGA 8800GTS 512MB 2Gb Corsair XMS2 PC6400 
Hard DriveOptical DriveOSMonitor
Maxtor SATA II 500Gb LG 20x SATA XP Professional Corporate 220WM Samsung 
PowerCaseMouse
Apevia 420Watt Apevia X-QPack G5 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
G0 Quad @ 3.6Ghz P35C-DS3R EVGA 8800GTS 512MB 2Gb Corsair XMS2 PC6400 
Hard DriveOptical DriveOSMonitor
Maxtor SATA II 500Gb LG 20x SATA XP Professional Corporate 220WM Samsung 
PowerCaseMouse
Apevia 420Watt Apevia X-QPack G5 
  hide details  
Reply
post #13 of 24
Thread Starter 
now what about my ram it keep getting more and more errors
Quad Maud!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q8200 @ 3.22 GHZ GIGABYTE GA-EP45-UD3P 9800GTX+ OCZ Reaper DDR2 1150 
Hard DriveOSMonitorKeyboard
250 Gig SeaGate Windows XP Pro Sony 17' LCD 1280x1024 Microsoft 
PowerMouse
Coolmax 650 Watt SLI Logitec 
  hide details  
Reply
Quad Maud!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q8200 @ 3.22 GHZ GIGABYTE GA-EP45-UD3P 9800GTX+ OCZ Reaper DDR2 1150 
Hard DriveOSMonitorKeyboard
250 Gig SeaGate Windows XP Pro Sony 17' LCD 1280x1024 Microsoft 
PowerMouse
Coolmax 650 Watt SLI Logitec 
  hide details  
Reply
post #14 of 24
if you set it at the rating I posted prior, try a 2.0 voltage. Other than that, trial and error buddy.
    
CPUMotherboardGraphicsRAM
G0 Quad @ 3.6Ghz P35C-DS3R EVGA 8800GTS 512MB 2Gb Corsair XMS2 PC6400 
Hard DriveOptical DriveOSMonitor
Maxtor SATA II 500Gb LG 20x SATA XP Professional Corporate 220WM Samsung 
PowerCaseMouse
Apevia 420Watt Apevia X-QPack G5 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
G0 Quad @ 3.6Ghz P35C-DS3R EVGA 8800GTS 512MB 2Gb Corsair XMS2 PC6400 
Hard DriveOptical DriveOSMonitor
Maxtor SATA II 500Gb LG 20x SATA XP Professional Corporate 220WM Samsung 
PowerCaseMouse
Apevia 420Watt Apevia X-QPack G5 
  hide details  
Reply
post #15 of 24
Thread Starter 
i understand that but i dont get what consists of trial and error on ram, n e way to return my ram do default timings?
Quad Maud!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q8200 @ 3.22 GHZ GIGABYTE GA-EP45-UD3P 9800GTX+ OCZ Reaper DDR2 1150 
Hard DriveOSMonitorKeyboard
250 Gig SeaGate Windows XP Pro Sony 17' LCD 1280x1024 Microsoft 
PowerMouse
Coolmax 650 Watt SLI Logitec 
  hide details  
Reply
Quad Maud!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q8200 @ 3.22 GHZ GIGABYTE GA-EP45-UD3P 9800GTX+ OCZ Reaper DDR2 1150 
Hard DriveOSMonitorKeyboard
250 Gig SeaGate Windows XP Pro Sony 17' LCD 1280x1024 Microsoft 
PowerMouse
Coolmax 650 Watt SLI Logitec 
  hide details  
Reply
post #16 of 24
Yeah Id say the memory is the stability problem at this point, try to set everything back to stock, set the vcore to 1.3v, and the memory to 2.1, clock the CPU and ram to stock speeds, then retest the ram at stock to find out if you have a bum chip, if you get errors again then remove one of the chips and run a loop of memtest, if it fails or runs the who9le loop toss in the other chip and do the same thing, if you dont get any errors with the ram then thats likely not your problem but if you do get errors you might look into RMAing the ram, or trying another set.

Now if you have no issues with the ram during testing then lower the rams ratio(from 333mhz-200mhz which is 1-1 with the FSB and the ideal intel combo) Then start by disabling all auto settings in the overclocking sections, set all voltage options to the least amount except the Vcore and the memory voltage, leave these at the voltages I stated above, make sure your PCIE and PCI clocks are locked at 100/33. THen simply start upping the FSB 3-5mhz at a time slowly untill you run into more stability issues then start working on the vcore some more. I should mention that Nforce-4 chipsets are the poorest overclocking chips for intel, so I wouldnt expect a huge gain in speed.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
940 C1 step Lapped ASUS E Premium Droop mod X1950XT custom TDX XMS2 675C4 Pro LED 
Hard DriveOSMonitorKeyboard
2x200 Maxtor SATA XP SP2 Acer 22" Wide Microsoft multi media 
PowerCaseMouse
OCZ GXS 700 Raidmax Ninja Black Micron 2.4 C/L 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
940 C1 step Lapped ASUS E Premium Droop mod X1950XT custom TDX XMS2 675C4 Pro LED 
Hard DriveOSMonitorKeyboard
2x200 Maxtor SATA XP SP2 Acer 22" Wide Microsoft multi media 
PowerCaseMouse
OCZ GXS 700 Raidmax Ninja Black Micron 2.4 C/L 
  hide details  
Reply
post #17 of 24
voltage, make sure to try for a 1:1 ratio. Since the processors speed is quad pumped, and the mems speed is only doubled, then the fsb you type in should be double that of the mem speed you type in. If your fsb is at 1000, then your ram subsequently should be at 500. Divide 100 by four you get 250, divide 500 by 2 you get 250. 250 and 250 is a 1:1 ratio. These guys on this forum have been trying to get that across to me for the last two weeks and I finally got the point yetserday. Jumped 800Mhz since then. What brand of memory do you have?

Edit: Oops, typed too slow, go with what he says.
    
CPUMotherboardGraphicsRAM
G0 Quad @ 3.6Ghz P35C-DS3R EVGA 8800GTS 512MB 2Gb Corsair XMS2 PC6400 
Hard DriveOptical DriveOSMonitor
Maxtor SATA II 500Gb LG 20x SATA XP Professional Corporate 220WM Samsung 
PowerCaseMouse
Apevia 420Watt Apevia X-QPack G5 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
G0 Quad @ 3.6Ghz P35C-DS3R EVGA 8800GTS 512MB 2Gb Corsair XMS2 PC6400 
Hard DriveOptical DriveOSMonitor
Maxtor SATA II 500Gb LG 20x SATA XP Professional Corporate 220WM Samsung 
PowerCaseMouse
Apevia 420Watt Apevia X-QPack G5 
  hide details  
Reply
post #18 of 24
Thread Starter 
what are good oc'ing boards and i have to start all over again oh and what is this 1.1 ratio
Quad Maud!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q8200 @ 3.22 GHZ GIGABYTE GA-EP45-UD3P 9800GTX+ OCZ Reaper DDR2 1150 
Hard DriveOSMonitorKeyboard
250 Gig SeaGate Windows XP Pro Sony 17' LCD 1280x1024 Microsoft 
PowerMouse
Coolmax 650 Watt SLI Logitec 
  hide details  
Reply
Quad Maud!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q8200 @ 3.22 GHZ GIGABYTE GA-EP45-UD3P 9800GTX+ OCZ Reaper DDR2 1150 
Hard DriveOSMonitorKeyboard
250 Gig SeaGate Windows XP Pro Sony 17' LCD 1280x1024 Microsoft 
PowerMouse
Coolmax 650 Watt SLI Logitec 
  hide details  
Reply
post #19 of 24
Adeoliver, what board and voltage did you get that 920 to 5 ghz with, if you don't mind me asking, or is that a no no between overclockers? Not sure of the ethics yet... Probably a 965 right?
    
CPUMotherboardGraphicsRAM
G0 Quad @ 3.6Ghz P35C-DS3R EVGA 8800GTS 512MB 2Gb Corsair XMS2 PC6400 
Hard DriveOptical DriveOSMonitor
Maxtor SATA II 500Gb LG 20x SATA XP Professional Corporate 220WM Samsung 
PowerCaseMouse
Apevia 420Watt Apevia X-QPack G5 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
G0 Quad @ 3.6Ghz P35C-DS3R EVGA 8800GTS 512MB 2Gb Corsair XMS2 PC6400 
Hard DriveOptical DriveOSMonitor
Maxtor SATA II 500Gb LG 20x SATA XP Professional Corporate 220WM Samsung 
PowerCaseMouse
Apevia 420Watt Apevia X-QPack G5 
  hide details  
Reply
post #20 of 24
Thread Starter 
i have ****ty pqi ram i really want to get 2 gigs of crucial but i just got this ram like 3 months ago and it has a really high cat latency if i take my ram out and put it back in will that reset the timing because i messed with them and i had no idea what i was doing
Quad Maud!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q8200 @ 3.22 GHZ GIGABYTE GA-EP45-UD3P 9800GTX+ OCZ Reaper DDR2 1150 
Hard DriveOSMonitorKeyboard
250 Gig SeaGate Windows XP Pro Sony 17' LCD 1280x1024 Microsoft 
PowerMouse
Coolmax 650 Watt SLI Logitec 
  hide details  
Reply
Quad Maud!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q8200 @ 3.22 GHZ GIGABYTE GA-EP45-UD3P 9800GTX+ OCZ Reaper DDR2 1150 
Hard DriveOSMonitorKeyboard
250 Gig SeaGate Windows XP Pro Sony 17' LCD 1280x1024 Microsoft 
PowerMouse
Coolmax 650 Watt SLI Logitec 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › internet problms caused by oc'ing