New Posts  All Forums:Forum Nav:

stuck at 99,99%

post #1 of 8
Thread Starter 
What do i do? it's a CPU WU.

How can i delete one specific WU? im currently folding 1 cpu 2 gpu at once, is that bad? should i just run one at the time? So i basically need either to get rid of this faulty (i think) WU, it's been at 99,99% the all day, or it change to 0,1% with a 3days ETA... Since i started folding last night im still learning and trying to absorb as much info as i can but i havent found anything so far
post #2 of 8
Quote:
Originally Posted by Frank33 View Post

What do i do? it's a CPU WU.
How can i delete one specific WU? im currently folding 1 cpu 2 gpu at once, is that bad? should i just run one at the time? So i basically need either to get rid of this faulty (i think) WU, it's been at 99,99% the all day, or it change to 0,1% with a 3days ETA... Since i started folding last night im still learning and trying to absorb as much info as i can but i havent found anything so far

You can safely run a CPU and multiple GPU clients at the same time. What client are you using?
post #3 of 8
Thread Starter 
FAHControl V7.1.52 i installed it for both cpu/gpu, i see all 3 of them there and i saw in a guide to also install HFM.net v0.9.0 wich i installed too.
But my main question is how do i reset/delete/fix the stuck WU??
post #4 of 8
Im not that familiar with this client.

All I could suggest is that your go into your work folder and delete the WU

C:\Users\[Username]\AppData\Roaming\FAHClient\Work

For ease of use and configuration, you may wish to consider using GPU Tracker V2.

http://www.overclock.net/t/739408/fah-gpu-tracker-v2

But wait for your current WU to finish as they will not be transfered over.
post #5 of 8
You will want to continue using the V7 client you are currently using and not the GPU tracker sethy suggested, the AMD GPUs are better supported in v7. The problem is likely your GPU and CPU folding fighting over limited CPU resources causing your CPU folding to take longer than it should. To verify this you should pause both of your GPU folding (right click on then pause for each GPU slot) and give your CPU about 30 minutes and see if it finishes. If it does not then you can find the work folder to delete it in C:\Users\[Username]\AppData\Roaming\FAHClient\Work, but before you do we should make some changes to make your CPU and GPUs play better together. First pause the CPU folding slot, then go to configure in the top left and then to the slots tab, then click on your CPU SMP slot and click edit, then the SMP section in the CPUS field cahnge that from -1 to 10 and press ok, then close the client and delete that WU and the reopen the client and it should be now using only 10/12 of your CPU threads. We do this because the AMD GPUs require about a whole thread of the CPU to work on their folding so we dedicate one thread to each of them. Next and finally you should verify that you have your AMD GPUs running the advanced WUs by double checking that you followed this step of set up. With those changes you should be folding well from here on out.
Edited by juano - 4/5/12 at 6:54am
Main Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2700k ASUS P8P67 WS Revolution EVGA 980 Ti SC+ Samsung 4x4GB DDR3 1866MHz 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Evo 1TB Samsung Spinpoint F4 2TB Samsung BD Combo Noctua NH-D14 
OSMonitorPowerCase
Windows 10 64 bit Asus PG279Q Kingwin Lazer Platinum 1000W Silverstone Raven RV03 
  hide details  
Reply
Main Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2700k ASUS P8P67 WS Revolution EVGA 980 Ti SC+ Samsung 4x4GB DDR3 1866MHz 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Evo 1TB Samsung Spinpoint F4 2TB Samsung BD Combo Noctua NH-D14 
OSMonitorPowerCase
Windows 10 64 bit Asus PG279Q Kingwin Lazer Platinum 1000W Silverstone Raven RV03 
  hide details  
Reply
post #6 of 8
Thread Starter 
So i can safely unsinstall HFM? and just use V7?
post #7 of 8
yes HFM is not required for folding.
Main Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2700k ASUS P8P67 WS Revolution EVGA 980 Ti SC+ Samsung 4x4GB DDR3 1866MHz 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Evo 1TB Samsung Spinpoint F4 2TB Samsung BD Combo Noctua NH-D14 
OSMonitorPowerCase
Windows 10 64 bit Asus PG279Q Kingwin Lazer Platinum 1000W Silverstone Raven RV03 
  hide details  
Reply
Main Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2700k ASUS P8P67 WS Revolution EVGA 980 Ti SC+ Samsung 4x4GB DDR3 1866MHz 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Evo 1TB Samsung Spinpoint F4 2TB Samsung BD Combo Noctua NH-D14 
OSMonitorPowerCase
Windows 10 64 bit Asus PG279Q Kingwin Lazer Platinum 1000W Silverstone Raven RV03 
  hide details  
Reply
post #8 of 8
doh.gif I gotta remember to check the type of GPU peeps are using....
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Overclock.net Folding@Home Team