Overclock.net › Forums › AMD › AMD CPUs › Help setting up new motherboard
New Posts  All Forums:Forum Nav:

Help setting up new motherboard

post #1 of 2
Thread Starter 
Hello,

I am having a hell of a time trying to get this setup stable on the factory defaults. I have a Gigabyte GA970A-UD3, FX 6100, GTX560Ti, and 8 GB Corsair Vengeance DDR3 1600 ram with a 600 watt power supply. I wrote out the MB Intelligent Tweaker (M.I.T.) from the bios setup to show everyone where my settings are at. Can someone please help me by showing me what I'm doing wrong? I will also post a link from the CPU-Z diagnosic I ran.

http://valid.canardpc.com/show_oc.php?id=2320756

MB Intelligent Tweaker (M.I.T)
CPU Clock Ratio – Auto or x7 – x35 (Set on Auto)
CPU Northbridge Feq – Auto or x5 –x20 (Set on Auto)
Core Performance Boost – Enable or Disable (Disabled)
CPB Ratio – Auto or Manual (Set on Auto)
CPU Host Clock Control – Auto or Manual (Set on Auto)
CPU Frequency (MHz) - Min = 200 Max = 500 (Set at 200)
PCIe Clock (MHz) – Auto or 100 to 150 (Set on Auto)
HT Link Width – Auto or 8bit – 16bit (Set on Auto)
HT Link Frequency – Auto or x1 – x13 (Set on Auto)
DRAM E.O.C.P. – Disable or DDR1600,1866,2000,2133,2200,2400 (Set at DDR1600)
Set Memory Clock – Auto or Manual (Set on Manual)
Memory Clock – x3.33 to x9.33 (Set at x8.00)

DRAM Configuration

CPU Host Clock Control – Auto or Manual (Set on Auto)
CPU Frequency (MHz) – Min = 200 Max = 500 (Set at 200)
Set Memory Clock – Auto or Manual (Set on Manual)
Memory Clock – x3.33 to x9.33 (Set at x8.00)
DCTs Mode – Ganged or Unganged (Set on Ganged)
DDR3 Timing Items – Auto or Manual (Set on Manual)
1T/2T Command Timing – 1T or 2T (Set at 2T)
CAS# Latency – 5T to 14T (Set at 9T)
RAS to CAS R/W Delay – 2T to 19T (Set at 9T)
Row Precharge Time – 2T to 19T (Set at 9T)
Minimum RAS Active Time – 8T to 40T (Set at 24T)
Twtr Command Delay – 4T to 9T (Set at 5T)
Trfc0 for DIMM1,DIMM3 – Auto or 90ns to 350ns (Set at 160ns)
Trfc1 for DIMM2,DIMM4 – Auto or 90ns to 350ns (Set at 160ns)
Write Recovery Time – 5T to 16T (Set at 12T)
Precharge Time – 4T to 10T (Set at 6T)
Row Cycle Time – 10T to 56T (Set at 41T)
RAS to RAS Delay – 1T to 9T (Set at 6T)

** DCTs Drive Strength ** (All set to Auto)

Proc0dt (Ohms) DCT0 and DCT1 Auto or 240 to 60
DQS Drive Strength DCT0 and DCT1 Auto or 0.75T to 1.5T
Data Drive Strength DCT0 and DCT1 Auto or 0.75T to 1.5T
MEMCLK Drive Strength DCT0 and DCT1 Auto or 0.75T to 1.5T
Addr/Cmd Drive Strength DCT0 and DCT1 Auto or 1.0x to 2.0x
CS/ODT Drive Strength DCT0 and DCT1 Auto or 1.0x to 2.0x
CKE Drive Strength DCT0 and DCT1 Auto or 1.0x to 2.0x

** DCTs Addr/Cmd Timing ** (All set to Auto)

Addr/Cmd Setup Time DCT0 and DCT1 Auto or ½T to 1T
Addr/Cmd Fine Delay DCT0 and DCT1 Auto or 0/64 to 31/64
CS/ODT Setup Time DCT0 and DCT1 Auto or 1/2T to 1T
CS/ODT Fine Delay DCT0 and DCT1 Auto or 0/64 to 31/64
CKE Setup Time DCT0 and DCT1 Auto or 1/2T to 1T
CKE Fine Delay DCT0 and DCT1 Auto or 0/64 to 31/64

Channel Interleaving – Enable or Disable (Set to Enable)
Bank Interleaving – Enable or Disable (Set to Enable)
DQS Training Control – Skip DQS or Perform DQS (Set to Skip DQS)
CKE Power Down Mode – Enable or Disable (Set to Disable)
Memclock Tri-Stat – Enable or Disable (Set to Disable)
System Voltage Control - Auto or Manual (Set to Manual)
CPU PLL Voltage Control (Set to Normal)
DRAM Voltage Control (Set to Normal)
DDR VTT Voltage Control (Set to Normal)
NB Voltage Control (Set to Normal)
HT Link Voltage Control (Set to Normal)
NB/PCIe/PLL Voltage Control (Set to Normal)
CPU NB VID Control (Set to Normal)
CPU Voltage Control (Set to Normal)
Normal CPU Vcore 1.2500V
post #2 of 2
You are manually setting CPU voltage. Have you verified that voltage as correct?

Also, the biggest problem is see is this:
Quote:
RAS to RAS Delay – 1T to 9T (Set at 6T)

If that is labeled correctly that is tRCD, and it should be set to 9.
Primary
(15 items)
 
Secondary
(13 items)
 
In progress
(10 items)
 
CPUMotherboardGraphicsRAM
5820K @ 4.2/3.5GHz core/uncore, 1.175/1.15v Gigabyte X99 SOC Champion (F22n) Gigabyte AORUS GTX 1080 Ti (F3P) @ 2025/1485, 1... 4x4GiB Crucial @ 2667, 12-12-12-28-T1, 1.34v 
Hard DriveHard DriveHard DriveCooling
Plextor M6e 128GB (fw 1.06) M.2 (PCI-E 2.0 2x) 2x Crucial M4 256GB 4x WD Scorpio Black 500GB Noctua NH-D15 
OSMonitorKeyboardPower
Windows 7 Professional x64 SP1 BenQ BL3200PT Filco Majestouch Tenkeyless (MX Brown) Corsair RM1000x 
CaseMouseAudio
Fractal Design Define R4 Logitech G402 Realtek ALC1150 + M-Audio AV40 
CPUMotherboardGraphicsRAM
X5670 @ 4.4/3.2GHz core/uncore, 1.36 vcore, 1.2... Gigabyte X58A-UD5 r2.0 w/FF3mod10 BIOS Sapphire Fury Nitro OC+ @ 1053/500, 1.225vGPU/1... 2x Samsung MV-3V4G3D/US @ 2000, 10-11-11-30-T1,... 
RAMHard DriveHard DriveHard Drive
1x Crucial BLT4G3D1608ET3LX0 @ 2000, 10-11-11-3... OCZ (Toshiba) Trion 150 120GB Hyundai Sapphire 120GB 3x Hitachi Deskstar 7k1000.C 1TB 
CoolingOSPowerCase
Noctua NH-D14 Windows 7 Pro x64 SP1 Antec TP-750 Fractal Design R5 
Audio
ASUS Xonar DS 
CPUMotherboardGraphicsRAM
i7-6800K @ 4.3/3.5GHz core/uncore, 1.36/1.2v ASRock X99 OC Formula (P3.10) GTX 780 (temporary) 4x4GiB Crucial DDR4-2400 @ 11-13-12-28-T2, 1.33v 
Hard DriveHard DriveCoolingOS
Intel 600p 256GB NVMe 2x HGST Travelstar 7k1000 1TB Corsair H55 (temporary) Windows Server 2016 Datacenter 
PowerCase
Seasonic SS-860XP2 Corsair Carbide Air 540 
  hide details  
Reply
Primary
(15 items)
 
Secondary
(13 items)
 
In progress
(10 items)
 
CPUMotherboardGraphicsRAM
5820K @ 4.2/3.5GHz core/uncore, 1.175/1.15v Gigabyte X99 SOC Champion (F22n) Gigabyte AORUS GTX 1080 Ti (F3P) @ 2025/1485, 1... 4x4GiB Crucial @ 2667, 12-12-12-28-T1, 1.34v 
Hard DriveHard DriveHard DriveCooling
Plextor M6e 128GB (fw 1.06) M.2 (PCI-E 2.0 2x) 2x Crucial M4 256GB 4x WD Scorpio Black 500GB Noctua NH-D15 
OSMonitorKeyboardPower
Windows 7 Professional x64 SP1 BenQ BL3200PT Filco Majestouch Tenkeyless (MX Brown) Corsair RM1000x 
CaseMouseAudio
Fractal Design Define R4 Logitech G402 Realtek ALC1150 + M-Audio AV40 
CPUMotherboardGraphicsRAM
X5670 @ 4.4/3.2GHz core/uncore, 1.36 vcore, 1.2... Gigabyte X58A-UD5 r2.0 w/FF3mod10 BIOS Sapphire Fury Nitro OC+ @ 1053/500, 1.225vGPU/1... 2x Samsung MV-3V4G3D/US @ 2000, 10-11-11-30-T1,... 
RAMHard DriveHard DriveHard Drive
1x Crucial BLT4G3D1608ET3LX0 @ 2000, 10-11-11-3... OCZ (Toshiba) Trion 150 120GB Hyundai Sapphire 120GB 3x Hitachi Deskstar 7k1000.C 1TB 
CoolingOSPowerCase
Noctua NH-D14 Windows 7 Pro x64 SP1 Antec TP-750 Fractal Design R5 
Audio
ASUS Xonar DS 
CPUMotherboardGraphicsRAM
i7-6800K @ 4.3/3.5GHz core/uncore, 1.36/1.2v ASRock X99 OC Formula (P3.10) GTX 780 (temporary) 4x4GiB Crucial DDR4-2400 @ 11-13-12-28-T2, 1.33v 
Hard DriveHard DriveCoolingOS
Intel 600p 256GB NVMe 2x HGST Travelstar 7k1000 1TB Corsair H55 (temporary) Windows Server 2016 Datacenter 
PowerCase
Seasonic SS-860XP2 Corsair Carbide Air 540 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › Help setting up new motherboard