Originally Posted by truckerguy
so would it be insane to plug a lamp into a 220 outlet just becase you can fit a 220 plug the conductive paths on the back of a mother board are a little over the thickness of a human hair your NB is part of the board, CPU/NB is part of the cpu little thicker wire(pins) it can handle 1.5 to 1.55 above that and the thermal silicone starts to meltthier gose the insalation between the curcits in the cpu and we know whats next a short
controling the the byproduct of pushing too much curent over to small a area wont stop or slow down the degrgation of the silicon
ok i kinda get what you mean but not really. so over 1.5-1.55 will melt the curcut in the board.. so 1.48 should be safe? \
my case has really good air flow.
hwmonitor pro says nb has never gone over 48 @ 1.5 i have backed it down to see what the lowest voltage i can use for 2830.
now if i turn nb voltage up say to 1.15 or little higher will that let me drop cpu-nb voltage
and i might have confussed alot of people but i am talking about cpu-nb when i say it is @1.5 not just nb i ahve never put that up i have it set to 1.1 in bios)same as auto)