Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)
New Posts  All Forums:Forum Nav:

GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL) - Page 122

post #1211 of 6656
Now I'm getting "Power Surge On Hub Port" A USB device has exceeded the power limits of the hub port.....
I noticed this after I attempted to lower my DVID to -.05 and it wouldn't boot, so I reset my cmos.
Everything else is running fine. I did Prime95 last night for 7 hours straight.

I only have a mice and keyboard plugged into my usb, same as always. I've unplugged all other usb devices and I'm still getting this message.

I've tried loading defaults, reflashed my bios to F7 again, loaded defaults again and I'm still getting it? Did I break something in my OC attempts?

=================================

Hi.

If you are using VMWARE, it might be cause. You need to check option for USB
post #1212 of 6656
Quote:
Originally Posted by mandrix View Post

Yeah, I got a board with bent cpu socket pins. Newegg wouldn't RMA it, either. I sent it off to Gigabyte so I guess I'll find out what it's going to cost me. If I can't sell it I guess I'll have 2 UD5H boards. wink.gif

Keep me updated on what happens.
post #1213 of 6656
Quote:
Originally Posted by eaglepowers View Post

Sin0822, I tried running in Auto and my cpu-z core voltage was the same as normal and dvid +.0, however, I noticed lower temps but that's probably because it's cooler in the room?
Mandrix, thanks for the advice, unfortunately, I just don't really understand the relationship w/ all the settings well enough to tinker. Like Sin0822 said, if I really want to achieve more I need to start from scratch and experiment. I wish it wasn't so time consuming.

You should start from scratch and get a working knowledge of overclocking. What's the rush?

I don't think that power surge message is related to your overclock. I had that early on, and had it again about a week ago so it spans several BIOS updates. Not sure what I did if anything about it but haven't had it in a while. Funny thing is, I didn't have anything plugged into those hubs/ports so it's kinda crazy.
I had that on my Z68XP-UD3 mobo once as well.
post #1214 of 6656
Quote:
Originally Posted by mandrix View Post

You should start from scratch and get a working knowledge of overclocking. What's the rush?
I don't think that power surge message is related to your overclock. I had that early on, and had it again about a week ago so it spans several BIOS updates. Not sure what I did if anything about it but haven't had it in a while. Funny thing is, I didn't have anything plugged into those hubs/ports so it's kinda crazy.
I had that on my Z68XP-UD3 mobo once as well.

Thanks for the advice. I tried to read through Sin's Sandy Bridge OC guide and kindof understand it but all these turbo, extreme....etc settings just leave me clueless? I just don't have as much time as I'd like to play w/ things especially this being my work pc, but you're right I shouldn't rush things and this is part of the fun.

The power surge is coming up all the time and is really annoying. It doesn't go more than a min before it pops up. I've tried reinstalling my usb drivers, different keyboard, unplugging my case usb but so far nothing. I'm wondering if my OS is corrupt?
Mr08
(12 items)
 
Mr 07
(13 items)
 
 
CPUMotherboardGraphicsRAM
2600K GIGABYTE Z77X-UD5H  MSI GTX 465 Twin Frozr II GE #1954 (unlocked 470) 4x4gb Samsung 30nm MV-3V4G3D 
Hard DriveCoolingOSMonitor
Samsung 830 256gb Thermalright Ultra-120 Extreme Win7 64bit Ultimate Eizo CG19 and Dell 2407  
KeyboardPowerCaseMouse
Fatal1ty Creative  SeaSonic X650 Gold  Silverstone Fortress FT02 Razer Lachesis 
CPUMotherboardGraphicsRAM
Q6600 3.2g Asus P5k Deluxe MSI GTX 465 Twin Frozr II GE #1954 (unlocked 470) 8gb Corsair Dominator 1066 
Hard DriveOSMonitorKeyboard
60g OCz Vertex II, Raptor and 2x 1.5tb Win7 64bit Ultimate Eizo CG19 and Dell 2407 Fatal1ty Creative 
PowerMouse
Corsair 520W Razer Lachesis 
  hide details  
Reply
Mr08
(12 items)
 
Mr 07
(13 items)
 
 
CPUMotherboardGraphicsRAM
2600K GIGABYTE Z77X-UD5H  MSI GTX 465 Twin Frozr II GE #1954 (unlocked 470) 4x4gb Samsung 30nm MV-3V4G3D 
Hard DriveCoolingOSMonitor
Samsung 830 256gb Thermalright Ultra-120 Extreme Win7 64bit Ultimate Eizo CG19 and Dell 2407  
KeyboardPowerCaseMouse
Fatal1ty Creative  SeaSonic X650 Gold  Silverstone Fortress FT02 Razer Lachesis 
CPUMotherboardGraphicsRAM
Q6600 3.2g Asus P5k Deluxe MSI GTX 465 Twin Frozr II GE #1954 (unlocked 470) 8gb Corsair Dominator 1066 
Hard DriveOSMonitorKeyboard
60g OCz Vertex II, Raptor and 2x 1.5tb Win7 64bit Ultimate Eizo CG19 and Dell 2407 Fatal1ty Creative 
PowerMouse
Corsair 520W Razer Lachesis 
  hide details  
Reply
post #1215 of 6656
Quote:
Originally Posted by Snakes View Post

Shoot, I reported on my vcore and temps reduction last night but it turns out the bios hadn't taken my input of 1.125v, I was actually running at 1.135. I've since learned that I get a BSOD with a vcore of 1.125 and lower, seems stable at 1.130 (this is at 4GHz) with decent temps under Prime95, I think I'll continue with these settings. I ran prime95 tonight with small FFTs successfully for 4 hours, it's not the most thorough stress test but things are looking stable.

Hey man, I forgot your board and CPU so I will check and edit in a sec. just making this so I don't forget to make the post.....again.



EDIT:
OK, you are on the same board with the same chip I have. I have a 100% stable 4.5 overclock that you can load. I have all processor states enabled and turbo off. If you want to just install a profile let me know and I will be more than happy to figure out how to drag it out of my bios for you. I'm sure there is a write-up somewhere around here, and if one doesn't exist I can write it after I figure it out. If they're going to give us loadable profiles we might as well use them.

The profile is using "Normal" for the Vcore setting so I cannot tell you exactly what your vcore will be, your chip will determine that on the fly.
Edited by Polyspecific - 5/15/12 at 12:52pm
Victoria
(10 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570K Gigabyte Z77x-UD5H XFX HD6950 Samsung Green DDR3 
Hard DriveCoolingOSKeyboard
Samsung 830 XSPC Rasa RX240 Windows 7 x64 Enterprise Saitek Eclipse 
CaseMouse
Antec Lanboy Air Logitech g500 
  hide details  
Reply
Victoria
(10 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570K Gigabyte Z77x-UD5H XFX HD6950 Samsung Green DDR3 
Hard DriveCoolingOSKeyboard
Samsung 830 XSPC Rasa RX240 Windows 7 x64 Enterprise Saitek Eclipse 
CaseMouse
Antec Lanboy Air Logitech g500 
  hide details  
Reply
post #1216 of 6656
what are the downsides to having LLC on the highest setting?

Chad
post #1217 of 6656
Quote:
Originally Posted by Polyspecific View Post

Hey man, I forgot your board and CPU so I will check and edit in a sec. just making this so I don't forget to make the post.....again.
EDIT:
OK, you are on the same board with the same chip I have. I have a 100% stable 4.5 overclock that you can load. I have all processor states enabled and turbo off. If you want to just install a profile let me know and I will be more than happy to figure out how to drag it out of my bios for you. I'm sure there is a write-up somewhere around here, and if one doesn't exist I can write it after I figure it out. If they're going to give us loadable profiles we might as well use them.
The profile is using "Normal" for the Vcore setting so I cannot tell you exactly what your vcore will be, your chip will determine that on the fly.

I think you can save your profile to a usb drive. I made the mistake of saving them in the bios and after I flashed my bios they were gone. Not a big deal but I plan on saving to a usb drive as well in the future.
Mr08
(12 items)
 
Mr 07
(13 items)
 
 
CPUMotherboardGraphicsRAM
2600K GIGABYTE Z77X-UD5H  MSI GTX 465 Twin Frozr II GE #1954 (unlocked 470) 4x4gb Samsung 30nm MV-3V4G3D 
Hard DriveCoolingOSMonitor
Samsung 830 256gb Thermalright Ultra-120 Extreme Win7 64bit Ultimate Eizo CG19 and Dell 2407  
KeyboardPowerCaseMouse
Fatal1ty Creative  SeaSonic X650 Gold  Silverstone Fortress FT02 Razer Lachesis 
CPUMotherboardGraphicsRAM
Q6600 3.2g Asus P5k Deluxe MSI GTX 465 Twin Frozr II GE #1954 (unlocked 470) 8gb Corsair Dominator 1066 
Hard DriveOSMonitorKeyboard
60g OCz Vertex II, Raptor and 2x 1.5tb Win7 64bit Ultimate Eizo CG19 and Dell 2407 Fatal1ty Creative 
PowerMouse
Corsair 520W Razer Lachesis 
  hide details  
Reply
Mr08
(12 items)
 
Mr 07
(13 items)
 
 
CPUMotherboardGraphicsRAM
2600K GIGABYTE Z77X-UD5H  MSI GTX 465 Twin Frozr II GE #1954 (unlocked 470) 4x4gb Samsung 30nm MV-3V4G3D 
Hard DriveCoolingOSMonitor
Samsung 830 256gb Thermalright Ultra-120 Extreme Win7 64bit Ultimate Eizo CG19 and Dell 2407  
KeyboardPowerCaseMouse
Fatal1ty Creative  SeaSonic X650 Gold  Silverstone Fortress FT02 Razer Lachesis 
CPUMotherboardGraphicsRAM
Q6600 3.2g Asus P5k Deluxe MSI GTX 465 Twin Frozr II GE #1954 (unlocked 470) 8gb Corsair Dominator 1066 
Hard DriveOSMonitorKeyboard
60g OCz Vertex II, Raptor and 2x 1.5tb Win7 64bit Ultimate Eizo CG19 and Dell 2407 Fatal1ty Creative 
PowerMouse
Corsair 520W Razer Lachesis 
  hide details  
Reply
post #1218 of 6656
Quote:
Originally Posted by Polyspecific View Post

Hey man, I forgot your board and CPU so I will check and edit in a sec. just making this so I don't forget to make the post.....again.
EDIT:
OK, you are on the same board with the same chip I have. I have a 100% stable 4.5 overclock that you can load. I have all processor states enabled and turbo off. If you want to just install a profile let me know and I will be more than happy to figure out how to drag it out of my bios for you. I'm sure there is a write-up somewhere around here, and if one doesn't exist I can write it after I figure it out. If they're going to give us loadable profiles we might as well use them.
The profile is using "Normal" for the Vcore setting so I cannot tell you exactly what your vcore will be, your chip will determine that on the fly.
That's an appealing offer but I'm kinda concerned about overclocking that high. I don't think my CPU cooler could handle those temps in a way I'd be comfortable with. When I was using the default bios settings with a 3.8GHz max it was already going up to 75C under prime95. I've now gotten it to 4GHz at 65C by lowering vcore, I expect 4.5 would require a significant vcore boost and therefore a temp increase. I feel like playing it safe for now.
Main rig
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 3570k Gigabyte Z77X-UD5H EVGA GeForce GTX 560 Ti Superclocked 1024MB G.Skill Ares DDR3 1866MHz 
Hard DriveHard DriveHard DriveHard Drive
Intel SSD 320 Series (120GB, 2.5in SATA 3Gb/s, ... Seagate Barracuda 7200.11 ST31500341AS 1.5TB 72... Western Digital WD20EARS-00MVWB0 Caviar Green 2... Western Digital My Passport external drive USB 3.0 
Optical DriveCoolingCoolingCooling
Samsung SH-B123L BD combo drive Cooler Master Hyper 212 Evo Antec Tri Cool 120mm fan w Blue LED Arctic Cooling MX-2 Thermal Compound 4g 
OSMonitorKeyboardPower
Windows 7 Home Premium Dell U2412M Logitech Wave Y-UV90 Antec Earthwatts EA-650 650W Continuous Power S... 
CaseMouseAudio
Corsair Obsidian 650D Logitech Gaming Mouse (G500) Creative Labs GigaWorks T20 2.0 Multimedia Spea... 
  hide details  
Reply
Main rig
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 3570k Gigabyte Z77X-UD5H EVGA GeForce GTX 560 Ti Superclocked 1024MB G.Skill Ares DDR3 1866MHz 
Hard DriveHard DriveHard DriveHard Drive
Intel SSD 320 Series (120GB, 2.5in SATA 3Gb/s, ... Seagate Barracuda 7200.11 ST31500341AS 1.5TB 72... Western Digital WD20EARS-00MVWB0 Caviar Green 2... Western Digital My Passport external drive USB 3.0 
Optical DriveCoolingCoolingCooling
Samsung SH-B123L BD combo drive Cooler Master Hyper 212 Evo Antec Tri Cool 120mm fan w Blue LED Arctic Cooling MX-2 Thermal Compound 4g 
OSMonitorKeyboardPower
Windows 7 Home Premium Dell U2412M Logitech Wave Y-UV90 Antec Earthwatts EA-650 650W Continuous Power S... 
CaseMouseAudio
Corsair Obsidian 650D Logitech Gaming Mouse (G500) Creative Labs GigaWorks T20 2.0 Multimedia Spea... 
  hide details  
Reply
post #1219 of 6656
I loaded sin's profile you need to unzip the RAR and get the root file onto the usb.

back on page 805 for details.

Chad
post #1220 of 6656
Quote:
Originally Posted by choikugi View Post

Now I'm getting "Power Surge On Hub Port" A USB device has exceeded the power limits of the hub port.....
I noticed this after I attempted to lower my DVID to -.05 and it wouldn't boot, so I reset my cmos.
Everything else is running fine. I did Prime95 last night for 7 hours straight.
I only have a mice and keyboard plugged into my usb, same as always. I've unplugged all other usb devices and I'm still getting this message.
I've tried loading defaults, reflashed my bios to F7 again, loaded defaults again and I'm still getting it? Did I break something in my OC attempts?
=================================
Hi.
If you are using VMWARE, it might be cause. You need to check option for USB

Thanks for the help. I don't know what vmware is? Is it in the bios?
Mr08
(12 items)
 
Mr 07
(13 items)
 
 
CPUMotherboardGraphicsRAM
2600K GIGABYTE Z77X-UD5H  MSI GTX 465 Twin Frozr II GE #1954 (unlocked 470) 4x4gb Samsung 30nm MV-3V4G3D 
Hard DriveCoolingOSMonitor
Samsung 830 256gb Thermalright Ultra-120 Extreme Win7 64bit Ultimate Eizo CG19 and Dell 2407  
KeyboardPowerCaseMouse
Fatal1ty Creative  SeaSonic X650 Gold  Silverstone Fortress FT02 Razer Lachesis 
CPUMotherboardGraphicsRAM
Q6600 3.2g Asus P5k Deluxe MSI GTX 465 Twin Frozr II GE #1954 (unlocked 470) 8gb Corsair Dominator 1066 
Hard DriveOSMonitorKeyboard
60g OCz Vertex II, Raptor and 2x 1.5tb Win7 64bit Ultimate Eizo CG19 and Dell 2407 Fatal1ty Creative 
PowerMouse
Corsair 520W Razer Lachesis 
  hide details  
Reply
Mr08
(12 items)
 
Mr 07
(13 items)
 
 
CPUMotherboardGraphicsRAM
2600K GIGABYTE Z77X-UD5H  MSI GTX 465 Twin Frozr II GE #1954 (unlocked 470) 4x4gb Samsung 30nm MV-3V4G3D 
Hard DriveCoolingOSMonitor
Samsung 830 256gb Thermalright Ultra-120 Extreme Win7 64bit Ultimate Eizo CG19 and Dell 2407  
KeyboardPowerCaseMouse
Fatal1ty Creative  SeaSonic X650 Gold  Silverstone Fortress FT02 Razer Lachesis 
CPUMotherboardGraphicsRAM
Q6600 3.2g Asus P5k Deluxe MSI GTX 465 Twin Frozr II GE #1954 (unlocked 470) 8gb Corsair Dominator 1066 
Hard DriveOSMonitorKeyboard
60g OCz Vertex II, Raptor and 2x 1.5tb Win7 64bit Ultimate Eizo CG19 and Dell 2407 Fatal1ty Creative 
PowerMouse
Corsair 520W Razer Lachesis 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)