Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)
New Posts  All Forums:Forum Nav:

GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL) - Page 123

post #1221 of 6656
Quote:
Originally Posted by eaglepowers View Post

Quote:
Originally Posted by choikugi View Post

Now I'm getting "Power Surge On Hub Port" A USB device has exceeded the power limits of the hub port.....
I noticed this after I attempted to lower my DVID to -.05 and it wouldn't boot, so I reset my cmos.
Everything else is running fine. I did Prime95 last night for 7 hours straight.
I only have a mice and keyboard plugged into my usb, same as always. I've unplugged all other usb devices and I'm still getting this message.
I've tried loading defaults, reflashed my bios to F7 again, loaded defaults again and I'm still getting it? Did I break something in my OC attempts?
=================================
Hi.
If you are using VMWARE, it might be cause. You need to check option for USB

Thanks for the help. I don't know what vmware is? Is it in the bios?

You are not using VMWare...
COMPUTER
(16 items)
 
  
CPUMotherboardGraphicsRAM
3570K Gigabyte GA-Z77X-UD3H Gigabyte GTX 670 Windforce OC 2GB Samsung 30nm 
Hard DriveHard DriveCoolingOS
WD Caviar Blue WD Caviar Black NZXT Havik 140 Windows 7 64bit 
OSMonitorKeyboardPower
Windows 8 64bit ASUS GD235HZ (GD245HQ) 120Hz Dell OCZ GameXStream 850W 
CaseMouseMouse PadAudio
Corsair Carbide 300R Logitech G9 naked Allsop Black Cloth (low profile) Logitech G35 Surround 
  hide details  
Reply
COMPUTER
(16 items)
 
  
CPUMotherboardGraphicsRAM
3570K Gigabyte GA-Z77X-UD3H Gigabyte GTX 670 Windforce OC 2GB Samsung 30nm 
Hard DriveHard DriveCoolingOS
WD Caviar Blue WD Caviar Black NZXT Havik 140 Windows 7 64bit 
OSMonitorKeyboardPower
Windows 8 64bit ASUS GD235HZ (GD245HQ) 120Hz Dell OCZ GameXStream 850W 
CaseMouseMouse PadAudio
Corsair Carbide 300R Logitech G9 naked Allsop Black Cloth (low profile) Logitech G35 Surround 
  hide details  
Reply
post #1222 of 6656
Quote:
Originally Posted by samwiches View Post

You are not using VMWare...

Yeah, that's what I assumed. It's driving me nuts. I'm going to try and go with an earlier bios to see if it goes away? I wonder if my board is defective?
Mr08
(12 items)
 
Mr 07
(13 items)
 
 
CPUMotherboardGraphicsRAM
2600K GIGABYTE Z77X-UD5H  MSI GTX 465 Twin Frozr II GE #1954 (unlocked 470) 4x4gb Samsung 30nm MV-3V4G3D 
Hard DriveCoolingOSMonitor
Samsung 830 256gb Thermalright Ultra-120 Extreme Win7 64bit Ultimate Eizo CG19 and Dell 2407  
KeyboardPowerCaseMouse
Fatal1ty Creative  SeaSonic X650 Gold  Silverstone Fortress FT02 Razer Lachesis 
CPUMotherboardGraphicsRAM
Q6600 3.2g Asus P5k Deluxe MSI GTX 465 Twin Frozr II GE #1954 (unlocked 470) 8gb Corsair Dominator 1066 
Hard DriveOSMonitorKeyboard
60g OCz Vertex II, Raptor and 2x 1.5tb Win7 64bit Ultimate Eizo CG19 and Dell 2407 Fatal1ty Creative 
PowerMouse
Corsair 520W Razer Lachesis 
  hide details  
Reply
Mr08
(12 items)
 
Mr 07
(13 items)
 
 
CPUMotherboardGraphicsRAM
2600K GIGABYTE Z77X-UD5H  MSI GTX 465 Twin Frozr II GE #1954 (unlocked 470) 4x4gb Samsung 30nm MV-3V4G3D 
Hard DriveCoolingOSMonitor
Samsung 830 256gb Thermalright Ultra-120 Extreme Win7 64bit Ultimate Eizo CG19 and Dell 2407  
KeyboardPowerCaseMouse
Fatal1ty Creative  SeaSonic X650 Gold  Silverstone Fortress FT02 Razer Lachesis 
CPUMotherboardGraphicsRAM
Q6600 3.2g Asus P5k Deluxe MSI GTX 465 Twin Frozr II GE #1954 (unlocked 470) 8gb Corsair Dominator 1066 
Hard DriveOSMonitorKeyboard
60g OCz Vertex II, Raptor and 2x 1.5tb Win7 64bit Ultimate Eizo CG19 and Dell 2407 Fatal1ty Creative 
PowerMouse
Corsair 520W Razer Lachesis 
  hide details  
Reply
post #1223 of 6656
Hello all, first post!

I am currently building my first box mainly for gaming and was having trouble picking out a motherboard. I am going to use this computer mostly for gaming. I already purchased a Gigabyte gtx 670, kingston hyperdrivex 120gb, WD 1TB drive, and an i7 3770. I was looking into this board but it seems it was just recently posted on newegg and I haven't been able to find any legit reviews. Does anyone know any benchmark comparisons with the current z77 boards? I want to make sure I am getting a solid board, and price is not much of an issue.

Thanks for the help!

EDIT - Seems my original link is not working:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813128552
Edited by indecisive29 - 5/15/12 at 2:33pm
post #1224 of 6656
Thread Starter 
I have one, what do you want to know?
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #1225 of 6656
Quote:
Originally Posted by Snakes View Post

That's an appealing offer but I'm kinda concerned about overclocking that high. I don't think my CPU cooler could handle those temps in a way I'd be comfortable with. When I was using the default bios settings with a 3.8GHz max it was already going up to 75C under prime95. I've now gotten it to 4GHz at 65C by lowering vcore, I expect 4.5 would require a significant vcore boost and therefore a temp increase. I feel like playing it safe for now.

snakes you feel confident your cooler is seated well ? what thermal paste did you use ? temps should lower after a few days bake on ... a ways back you said your idle temps were high , did you cross check that with a couple of proggies while watching fan speeds ? i am just hanging out at 4.4ghz and never break 50c under normal use and i have the 212+ cooler .

you can use GTL . to tweak the volts while in widows and watch your temps when you apply settings . you know can get enthusiasts insurance from intel for 20 bucks and play to your hearts desire ...
Edited by bkdg100 - 5/15/12 at 5:13pm
post #1226 of 6656
Quote:
Originally Posted by indecisive29 View Post

Hello all, first post!
I am currently building my first box mainly for gaming and was having trouble picking out a motherboard. I am going to use this computer mostly for gaming. I already purchased a Gigabyte gtx 670, kingston hyperdrivex 120gb, WD 1TB drive, and an i7 3770. I was looking into this board but it seems it was just recently posted on newegg and I haven't been able to find any legit reviews. Does anyone know any benchmark comparisons with the current z77 boards? I want to make sure I am getting a solid board, and price is not much of an issue.
Thanks for the help!
EDIT - Seems my original link is not working:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813128552


you can find reviews all over . from linux to mac heads and everything between . i wouldn't post links for reviews to other sites as that would be unethical in my opinion ,. but , you are already at the center of the gigabyte world and "THE MAN" ( Sin0822 ) just asked you a question .....
post #1227 of 6656
I wanted to look at benchmark comparisons between the the sniper 3 and the other top z77 gaming boards. At first I was waiting for the M5F but it seems it has gotten delayed and I do not want to wait. I guess I am a little bit of a noob and just looking for a solid gaming board. Checking into the reliability I suppose is the biggest concern of mine, and how one gpu would perform on the board (specifically, if possible, the gigabyte gtx 670).
post #1228 of 6656
Quote:
Originally Posted by eaglepowers View Post

Yeah, that's what I assumed. It's driving me nuts. I'm going to try and go with an earlier bios to see if it goes away? I wonder if my board is defective?

I had the exact same issue. Make sure the USB 3.0 drivers are the newest via Intel along with the Chipset and Intel Management software via Intel website. This took care of the issue for me.
VICE
(19 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 5 1600 ASUS ROG STRIX B350-F GAMING ASUS ROG Strix RX 560 4g OC CORSAIR Vengeance LPX 16GB DDR4-3000 
Hard DriveHard DriveHard DriveCooling
Corsair Force MP500 Series M.2 SSD 240GB  256gb Kingston HyperX Savage SSD 240gb Sandisk Extreme SSD  Barrow LTYK3A-04 
CoolingCoolingCoolingOS
EK 480mm Radiator 2x XSPC Photon 170 D5 Pump/Res Combos 360mm Swiftech Radiator  Windows 10 64-Bit 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M Custom WASD mechanical Evga 750w SuperNOVA G2 CaseLabs Merlin SM8 
MouseMouse PadAudio
CM Storm Xornet ROG Asus SupremeFX Realtek 1220 
  hide details  
Reply
VICE
(19 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 5 1600 ASUS ROG STRIX B350-F GAMING ASUS ROG Strix RX 560 4g OC CORSAIR Vengeance LPX 16GB DDR4-3000 
Hard DriveHard DriveHard DriveCooling
Corsair Force MP500 Series M.2 SSD 240GB  256gb Kingston HyperX Savage SSD 240gb Sandisk Extreme SSD  Barrow LTYK3A-04 
CoolingCoolingCoolingOS
EK 480mm Radiator 2x XSPC Photon 170 D5 Pump/Res Combos 360mm Swiftech Radiator  Windows 10 64-Bit 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M Custom WASD mechanical Evga 750w SuperNOVA G2 CaseLabs Merlin SM8 
MouseMouse PadAudio
CM Storm Xornet ROG Asus SupremeFX Realtek 1220 
  hide details  
Reply
post #1229 of 6656
Quote:
Originally Posted by indecisive29 View Post

I wanted to look at benchmark comparisons between the the sniper 3 and the other top z77 gaming boards. At first I was waiting for the M5F but it seems it has gotten delayed and I do not want to wait. I guess I am a little bit of a noob and just looking for a solid gaming board. Checking into the reliability I suppose is the biggest concern of mine, and how one gpu would perform on the board (specifically, if possible, the gigabyte gtx 670).

if you want to spend for the G1.Sniper 3 , by all means that is a gamers board . best GB has too offer . now you should just decide between that and the asus 300+ bucks boards and you are all set .

btw . why did you get a non K ver of the cpu ?
post #1230 of 6656
Quote:
Originally Posted by bkdg100 View Post

if you want to spend for the G1.Sniper 3 , by all means that is a gamers board . best GB has too offer . now you should just decide between that and the asus 300+ bucks boards and you are all set .
btw . why did you get a non K ver of the cpu ?
I did some research and found that if I am not OC'ing that the 3770 is actually the preferred proc (hopefully this is accurate info). I have some what of buyers remorse getting it, but since this is my first build I did not think I was going to be messing around with OC'ing too much.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)