Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)
New Posts  All Forums:Forum Nav:

GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL) - Page 137

post #1361 of 6656
Hey guys/gals new to the forum. Just wanted to say I have a G1.Sniper3 paired with a 3770k. I there an oc guide somewhere as I am very new to the I7. My last processor is a Q9550 on a ud3p. thumb.gif

Thanks in advance!
Latest
(17 items)
 
  
CPUMotherboardGraphicsGraphics
4790K ASUS Maximus Hero VII ASUS R9 290 DCUII  ASUS R9 290 DCUII  
RAMHard DriveHard DriveCooling
G.Skill Trident X 16GB F3-2400C10-8GTX  Samsung 840 EVO SSD  Samsung 840 EVO SSD  Swiftech Apogee XL ROG Edition  
OSMonitorKeyboardPower
Windows 10 Home ASUS VS247H-P Corsair Gaming K70  EVGA 1200 P2  
CaseMouseMouse PadAudio
Corsair 760T Artic White  Corsair Gaming M65 RGB  Corsair MM200  Onboard ROG SupremeFX  
Audio
Corsair Gaming H2100  
  hide details  
Reply
Latest
(17 items)
 
  
CPUMotherboardGraphicsGraphics
4790K ASUS Maximus Hero VII ASUS R9 290 DCUII  ASUS R9 290 DCUII  
RAMHard DriveHard DriveCooling
G.Skill Trident X 16GB F3-2400C10-8GTX  Samsung 840 EVO SSD  Samsung 840 EVO SSD  Swiftech Apogee XL ROG Edition  
OSMonitorKeyboardPower
Windows 10 Home ASUS VS247H-P Corsair Gaming K70  EVGA 1200 P2  
CaseMouseMouse PadAudio
Corsair 760T Artic White  Corsair Gaming M65 RGB  Corsair MM200  Onboard ROG SupremeFX  
Audio
Corsair Gaming H2100  
  hide details  
Reply
post #1362 of 6656
Quote:
Originally Posted by Conners View Post

Hey guys/gals new to the forum. Just wanted to say I have a G1.Sniper3 paired with a 3770k. I there an oc guide somewhere as I am very new to the I7. My last processor is a Q9550 on a ud3p. thumb.gif
Thanks in advance!
Here's one. http://www.overclock.net/t/1247413/ivy-bridge-overclocking-guide-with-ln2-guide-at-the-end
Main rig
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 3570k Gigabyte Z77X-UD5H EVGA GeForce GTX 560 Ti Superclocked 1024MB G.Skill Ares DDR3 1866MHz 
Hard DriveHard DriveHard DriveHard Drive
Intel SSD 320 Series (120GB, 2.5in SATA 3Gb/s, ... Seagate Barracuda 7200.11 ST31500341AS 1.5TB 72... Western Digital WD20EARS-00MVWB0 Caviar Green 2... Western Digital My Passport external drive USB 3.0 
Optical DriveCoolingCoolingCooling
Samsung SH-B123L BD combo drive Cooler Master Hyper 212 Evo Antec Tri Cool 120mm fan w Blue LED Arctic Cooling MX-2 Thermal Compound 4g 
OSMonitorKeyboardPower
Windows 7 Home Premium Dell U2412M Logitech Wave Y-UV90 Antec Earthwatts EA-650 650W Continuous Power S... 
CaseMouseAudio
Corsair Obsidian 650D Logitech Gaming Mouse (G500) Creative Labs GigaWorks T20 2.0 Multimedia Spea... 
  hide details  
Reply
Main rig
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 3570k Gigabyte Z77X-UD5H EVGA GeForce GTX 560 Ti Superclocked 1024MB G.Skill Ares DDR3 1866MHz 
Hard DriveHard DriveHard DriveHard Drive
Intel SSD 320 Series (120GB, 2.5in SATA 3Gb/s, ... Seagate Barracuda 7200.11 ST31500341AS 1.5TB 72... Western Digital WD20EARS-00MVWB0 Caviar Green 2... Western Digital My Passport external drive USB 3.0 
Optical DriveCoolingCoolingCooling
Samsung SH-B123L BD combo drive Cooler Master Hyper 212 Evo Antec Tri Cool 120mm fan w Blue LED Arctic Cooling MX-2 Thermal Compound 4g 
OSMonitorKeyboardPower
Windows 7 Home Premium Dell U2412M Logitech Wave Y-UV90 Antec Earthwatts EA-650 650W Continuous Power S... 
CaseMouseAudio
Corsair Obsidian 650D Logitech Gaming Mouse (G500) Creative Labs GigaWorks T20 2.0 Multimedia Spea... 
  hide details  
Reply
post #1363 of 6656
Very disappointed in this brand. My first Gigabyte and probably my last. Let me recap so far what's happened:

1. Not even base LAN drivers installed--not a big deal, just annoying
2. UEFI is complete junk. Very clunky and the mouse integration is poor.
3. Bios utility does not detect newest bios. It updates my old F2 bios to F2.... yea, problem is there's at least 3 other newer bios...
4. Vcore adjustments not allowed. WHY? Even sub $50 boards allow vcore adjustments this is just inexcusable. Why even buy an aftermarket board then?
4. Smart fan controls are poor. I have to choose from base settings of "Silent, Normal etc. " Why not give the user more control instead of choosing these preset points.

Seriously considering returning my z77 DS3H. This is NOT a board anyone should be purchasing.
Edited by Spicy61 - 5/19/12 at 2:32pm
post #1364 of 6656
Quote:
Originally Posted by stasio View Post

First of all,be sure that you have inserted (plugged) any device in USB3 ports,then you can install VIA driver or reflash BIOS.

I did what you said. I reflashed bios F9 and reinstalled drivers with usb devices plugged in. Still cant charge iphone 4.
I tried installing Gigabyte ON/OFF charge utility, but idk where it installed it. Cant find it on my computer.
I couldnt charge my iphone on my EP45-UD3R either.
I tried the power options in the control option and i have it on High Performance and checked advanced settings.
I am using stock iphone cable and I tried using stock iphone firmware.

=(
i5 3570k build
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k Gigabyte Z77X-UD3H Evga Gtx 670 FTW 4 x 4gb Samsung 30nm  
Hard DriveHard DriveOptical DriveCooling
Crucial M4 128gb WD 500 GB Samsung 22x XSPC RASA 750 RS360 
OSMonitorKeyboardPower
Windows 7 x64 Samsung SyncMaster BX2331 Asus Corsair 750 
CaseMouseMouse PadAudio
Cooler Master NV 690 Asus Piece of paper taped to desk Asus Sonar DX 
  hide details  
Reply
i5 3570k build
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k Gigabyte Z77X-UD3H Evga Gtx 670 FTW 4 x 4gb Samsung 30nm  
Hard DriveHard DriveOptical DriveCooling
Crucial M4 128gb WD 500 GB Samsung 22x XSPC RASA 750 RS360 
OSMonitorKeyboardPower
Windows 7 x64 Samsung SyncMaster BX2331 Asus Corsair 750 
CaseMouseMouse PadAudio
Cooler Master NV 690 Asus Piece of paper taped to desk Asus Sonar DX 
  hide details  
Reply
post #1365 of 6656
Sin my memories is Crucial Ballistix ddr3-1866 4x4

http://www.newegg.com/Product/Product.aspx?Item=N82E16820148560
VICE
(19 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 5 1600 ASUS ROG STRIX B350-F GAMING ASUS ROG Strix RX 560 4g OC CORSAIR Vengeance LPX 16GB DDR4-3000 
Hard DriveHard DriveHard DriveCooling
Corsair Force MP500 Series M.2 SSD 240GB  256gb Kingston HyperX Savage SSD 240gb Sandisk Extreme SSD  Barrow LTYK3A-04 
CoolingCoolingCoolingOS
EK 480mm Radiator 2x XSPC Photon 170 D5 Pump/Res Combos 360mm Swiftech Radiator  Windows 10 64-Bit 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M Custom WASD mechanical Evga 750w SuperNOVA G2 CaseLabs Merlin SM8 
MouseMouse PadAudio
CM Storm Xornet ROG Asus SupremeFX Realtek 1220 
  hide details  
Reply
VICE
(19 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 5 1600 ASUS ROG STRIX B350-F GAMING ASUS ROG Strix RX 560 4g OC CORSAIR Vengeance LPX 16GB DDR4-3000 
Hard DriveHard DriveHard DriveCooling
Corsair Force MP500 Series M.2 SSD 240GB  256gb Kingston HyperX Savage SSD 240gb Sandisk Extreme SSD  Barrow LTYK3A-04 
CoolingCoolingCoolingOS
EK 480mm Radiator 2x XSPC Photon 170 D5 Pump/Res Combos 360mm Swiftech Radiator  Windows 10 64-Bit 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M Custom WASD mechanical Evga 750w SuperNOVA G2 CaseLabs Merlin SM8 
MouseMouse PadAudio
CM Storm Xornet ROG Asus SupremeFX Realtek 1220 
  hide details  
Reply
post #1366 of 6656
ok I am in , posting now on my new z77 UD3H , so far smooth as silk , updated to f9 bios befor loading the OS and all is well . Mine came with F7 preloaded . Did not care for amazons ocaking of my board , they just threw it in a box, no packing material , and just shipped it . one end of my motherboard box was crushed , did not seem to hurt anything but next time I think I will use new egg . Anyway where are the power settings for proformance ? been digging around in the bios and just cant find them , any suggestions ?

oops never mind I found it biggrin.gif
I do have one question , is gigabytes utiltitys any good I am looking at "3D Power and easy tune" Never used these any problems with these ? 3D power power looks cool
Edited by brothergc - 5/19/12 at 4:54pm
post #1367 of 6656
Just out of curousity is there such a thing as a bios template ne more:whistle: If so I would like to see one for the G1.sniper 3...I know I don't understand what and why I should change a setting. Vcore, dvid llc, fmc and so one. Sorry just trying to figure out how all this works and why.
Latest
(17 items)
 
  
CPUMotherboardGraphicsGraphics
4790K ASUS Maximus Hero VII ASUS R9 290 DCUII  ASUS R9 290 DCUII  
RAMHard DriveHard DriveCooling
G.Skill Trident X 16GB F3-2400C10-8GTX  Samsung 840 EVO SSD  Samsung 840 EVO SSD  Swiftech Apogee XL ROG Edition  
OSMonitorKeyboardPower
Windows 10 Home ASUS VS247H-P Corsair Gaming K70  EVGA 1200 P2  
CaseMouseMouse PadAudio
Corsair 760T Artic White  Corsair Gaming M65 RGB  Corsair MM200  Onboard ROG SupremeFX  
Audio
Corsair Gaming H2100  
  hide details  
Reply
Latest
(17 items)
 
  
CPUMotherboardGraphicsGraphics
4790K ASUS Maximus Hero VII ASUS R9 290 DCUII  ASUS R9 290 DCUII  
RAMHard DriveHard DriveCooling
G.Skill Trident X 16GB F3-2400C10-8GTX  Samsung 840 EVO SSD  Samsung 840 EVO SSD  Swiftech Apogee XL ROG Edition  
OSMonitorKeyboardPower
Windows 10 Home ASUS VS247H-P Corsair Gaming K70  EVGA 1200 P2  
CaseMouseMouse PadAudio
Corsair 760T Artic White  Corsair Gaming M65 RGB  Corsair MM200  Onboard ROG SupremeFX  
Audio
Corsair Gaming H2100  
  hide details  
Reply
post #1368 of 6656
Quote:
Originally Posted by nimitz87 View Post

setting LLC to high or turbo and using +.010 gives me a vcore in cpu-z of 1.38 going to get a multi meter today on the way home from work done with programs after seeing they aren't accurate.
Suwannee is very nice, use to go camping there on the river.
how do I remove stuff I don't want from the sensors page of hwinfo?
great info going to grab a multi meter and test it out myself, I'm pretty happy with my 1.308 (cpu-z) with temps under 70 @ load.
should I try and mess with offset, I still don't really understand it fully, or the full benefits.
OK, I see now you're using a 2500K? Then I'm not sure about voltage but I'm running a stable x45 with a 3770K with those settings.Are you sure you were using DVID? You have to set vcore to Normal then you can type in the offset below it.

I'm about a mile from the river, probably 8 miles from the State Park where you may have camped.

HWINFO: bring up the sensor panel and click configure. Click on one of the items you don't want displayed. Now look to right of window, see where the 2 checkboxes are that say Sensor Monitoring Enabled and Show Reading? Just click on one so the checkmarks disappear and it won't be shown. To re-enable just do the opposite.
It appears to me that HWINFO responds faster to vcore changes than any other program I've used, including EasyTune.

Yeah if you're using a 2500K then that's good. When I was running a 2600K it took much more for x45 anyway.
I went and pulled my ancient but expensive bench meter out but it's a PITA bulky, think I'll pick up a small multi next time I go to Lowes or Wally World and compare, if it's close to my BK Precision then I'll just use it instead.
post #1369 of 6656
Quote:
Originally Posted by Conners View Post

Hey guys/gals new to the forum. Just wanted to say I have a G1.Sniper3 paired with a 3770k. I there an oc guide somewhere as I am very new to the I7. My last processor is a Q9550 on a ud3p. thumb.gif
Thanks in advance!
Hey Conners, welcome. Glad you made it over, doesn't seem to be many posting with the Sniper 3 yet. For my purposes using DVID offset and High or Turbo LLC works pretty good for me.

I think Sin has a Sniper, maybe he'll chime in.
Not sure about the Sniper, but the UD5H can save profiles which can be loaded on another pc? Look on the last page of the Advanced Bios and see if yours has that ability.
Edited by mandrix - 5/19/12 at 5:34pm
post #1370 of 6656
Yeah man Hi i did make it lol. Hey ugh just for my education what do you mean by using DVID offset and High or Turbo LLC. Do you put vcore in normal then set DVID to +.010 and leave it there? Or do that and go back and put vcore to say like 1.2v and if you do that does DVID come into play?

Maybe sin will start a g1.sniper 3 officical thread. thumb.gif No way do I want to read through 138 pages of this forum lol..

guess what forum is down again...lol you don't have to answer that...smile.gif
Latest
(17 items)
 
  
CPUMotherboardGraphicsGraphics
4790K ASUS Maximus Hero VII ASUS R9 290 DCUII  ASUS R9 290 DCUII  
RAMHard DriveHard DriveCooling
G.Skill Trident X 16GB F3-2400C10-8GTX  Samsung 840 EVO SSD  Samsung 840 EVO SSD  Swiftech Apogee XL ROG Edition  
OSMonitorKeyboardPower
Windows 10 Home ASUS VS247H-P Corsair Gaming K70  EVGA 1200 P2  
CaseMouseMouse PadAudio
Corsair 760T Artic White  Corsair Gaming M65 RGB  Corsair MM200  Onboard ROG SupremeFX  
Audio
Corsair Gaming H2100  
  hide details  
Reply
Latest
(17 items)
 
  
CPUMotherboardGraphicsGraphics
4790K ASUS Maximus Hero VII ASUS R9 290 DCUII  ASUS R9 290 DCUII  
RAMHard DriveHard DriveCooling
G.Skill Trident X 16GB F3-2400C10-8GTX  Samsung 840 EVO SSD  Samsung 840 EVO SSD  Swiftech Apogee XL ROG Edition  
OSMonitorKeyboardPower
Windows 10 Home ASUS VS247H-P Corsair Gaming K70  EVGA 1200 P2  
CaseMouseMouse PadAudio
Corsair 760T Artic White  Corsair Gaming M65 RGB  Corsair MM200  Onboard ROG SupremeFX  
Audio
Corsair Gaming H2100  
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)