Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)
New Posts  All Forums:Forum Nav:

GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL) - Page 158

post #1571 of 6656
Quote:
Originally Posted by mandrix View Post

Has anyone been able to get x26 from G Skill F3-2400C10D-8GTX ram? No matter how I loosen the timings it won't boot at 2600. Supposedly TweakTown loosened the timings slightly and was able to boot up with 2T CR but I got nothing.
At stock Profile 1 settings I get Read=23311 Write=23530 Copy=27490 Latency=32.2 and the kit has been rock solid stable.
If someone has settings they would share including any voltage tweaks I would much appreciate. I'm running cpu OC x45 at present, FWIW.

You are not the only one bro ..same here ,tested 4 different sets of RAM (they are all capable of going above 2400) with no avail ,it all comes down to your CPU's IMC
as far as i know there is very few retail Ivy chips that will do 2800+ and some will have trouble reaching 2600= it's a roll of the dice with this chips
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
post #1572 of 6656
Quote:
Originally Posted by Sin0822 View Post

You really shouldn't have any BSOD issues, if you do please report, update your BIOS to the most recent: F8D http://www.mediafire.com/?figx5qacoo2eh0d
Can you tell me, is your OS fully updated? Do you have another SSD by chance? What about your USB devices, for the heck of it try uninstalling the Intel USb 3.0 driver. Is your system overclocked? do you have XMP set?
IMO perhaps you have a bad board and probably should RMA it, but let's try some other stuff, try this BIOS: http://www.mediafire.com/?figx5qacoo2eh0d GB never really updates their site with the BETAs, and they are slow with the finals as well.

Thanks for your help Sin.

My OS is fully updated. I don't have another SSD. Already tried uninstalling the USB 3.0 driver and nothing. Tried many other things mentioned here and other forums. I'm trying to overclock, but even at stock freezes. My sets of ram are not XMP enabled and I don't have other one. My actual bios is F8d, the one posted on TweakTown forums.

BUT....I did something today that seemed to help, because it has been stable for a while: in BIOS, to raise the IMC by 0.005 (default was 0.925, now it's 0.930). So far so good with that change. Hope this helps in the end. I did that in addition to put BCLK to 100.01
Edited by Yor_ - 5/25/12 at 2:55pm
DarKbox One
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 6700K MSI Z170A Gaming M7 MSI GTX 980 Ti Gaming 6G G.Skill Ripjaws V DDR4 3000 CL15 
Hard DriveHard DriveCoolingOS
Samsung SM951 M.2 PCIe 3.0 x4 AHCI 256 GB Samsung 850 Pro Noctua NH-U12S Windows 10 x64 
MonitorKeyboardPowerCase
Asus VG248QE CM Storm QuickFire Rapid (Red) Corsair AX750 Fractal Design Define R4 Blackout Silent 
MouseMouse PadAudioAudio
Logitech G402 Steelseries QcK+ RME Babyface JBL LSR305 
AudioOther
Audio-Technica ATH-M50s ASUS RT-N66U Wireless-N900 
  hide details  
Reply
DarKbox One
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 6700K MSI Z170A Gaming M7 MSI GTX 980 Ti Gaming 6G G.Skill Ripjaws V DDR4 3000 CL15 
Hard DriveHard DriveCoolingOS
Samsung SM951 M.2 PCIe 3.0 x4 AHCI 256 GB Samsung 850 Pro Noctua NH-U12S Windows 10 x64 
MonitorKeyboardPowerCase
Asus VG248QE CM Storm QuickFire Rapid (Red) Corsair AX750 Fractal Design Define R4 Blackout Silent 
MouseMouse PadAudioAudio
Logitech G402 Steelseries QcK+ RME Babyface JBL LSR305 
AudioOther
Audio-Technica ATH-M50s ASUS RT-N66U Wireless-N900 
  hide details  
Reply
post #1573 of 6656
Thread Starter 
Quote:
Originally Posted by Yor_ View Post

Thanks for your help Sin.
My OS is fully updated. I don't have another SSD. Already tried uninstalling the USB 3.0 driver and nothing. Tried many other things mentioned here and other forums. I'm trying to overclock, but even at stock freezes. My sets of ram are not XMP enabled and I don't have other one. My actual bios is F8d, the one posted on TweakTown forums.
BUT....I did something today that seemed to help, because it has been stable for a while: in BIOS, to raise the IMC by 0.005 (default was 0.925, now it's 0.930). So far so good with that change. Hope this helps in the end. I did that in addition to put BCLK to 100.01
You already tried setting your BCLk to 100.00 and setting your vcore manually to like 1.2v? How about disabling EIST and setting your VCore?

if none of those works, then you should RMA the board, it might be defective. I would RMA it anyways, they would send you one that is guaranteed working. You see to have very odd issue. You don't have another OS by chance do you?
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #1574 of 6656
Quote:
Originally Posted by Sin0822 View Post

You already tried setting your BCLk to 100.00 and setting your vcore manually to like 1.2v? How about disabling EIST and setting your VCore?
if none of those works, then you should RMA the board, it might be defective. I would RMA it anyways, they would send you one that is guaranteed working. You see to have very odd issue. You don't have another OS by chance do you?

Yeah, I should do RMA it frown.gif

My vcore is at 1.22v, EIST, C1E and the other power saving functions disabled, yes.

But anyways, can you comment further on the IMC voltage change I did?. My VTT is 1.050, my actual IMC is 0.930 (default 0.925). I'm overclocking RAM to 1866 9-9-9-24-1T 1.5v (these Samsungs at default are 1600 11-11-11-28 1.35v default).

...With the raise in IMC, it stabilized a little. No freezes since then.
Edited by Yor_ - 5/25/12 at 3:10pm
DarKbox One
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 6700K MSI Z170A Gaming M7 MSI GTX 980 Ti Gaming 6G G.Skill Ripjaws V DDR4 3000 CL15 
Hard DriveHard DriveCoolingOS
Samsung SM951 M.2 PCIe 3.0 x4 AHCI 256 GB Samsung 850 Pro Noctua NH-U12S Windows 10 x64 
MonitorKeyboardPowerCase
Asus VG248QE CM Storm QuickFire Rapid (Red) Corsair AX750 Fractal Design Define R4 Blackout Silent 
MouseMouse PadAudioAudio
Logitech G402 Steelseries QcK+ RME Babyface JBL LSR305 
AudioOther
Audio-Technica ATH-M50s ASUS RT-N66U Wireless-N900 
  hide details  
Reply
DarKbox One
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 6700K MSI Z170A Gaming M7 MSI GTX 980 Ti Gaming 6G G.Skill Ripjaws V DDR4 3000 CL15 
Hard DriveHard DriveCoolingOS
Samsung SM951 M.2 PCIe 3.0 x4 AHCI 256 GB Samsung 850 Pro Noctua NH-U12S Windows 10 x64 
MonitorKeyboardPowerCase
Asus VG248QE CM Storm QuickFire Rapid (Red) Corsair AX750 Fractal Design Define R4 Blackout Silent 
MouseMouse PadAudioAudio
Logitech G402 Steelseries QcK+ RME Babyface JBL LSR305 
AudioOther
Audio-Technica ATH-M50s ASUS RT-N66U Wireless-N900 
  hide details  
Reply
post #1575 of 6656
what does pwm phase control do for the different 5 settings?
Silent But Deadly
(15 items)
 
  
CPUMotherboardGraphicsRAM
3570k @4.4 Gigabyte Z77X-UD3H Powercolor AMD 470 8GB Samsung 
Hard DriveCoolingCoolingOS
Cricual M4 64 / WD6400AAKS Silver Arrow SB-E Arctic Cooling 7970 7 64 Ultimate 
MonitorPowerCaseMouse
BenQ XL2410T Corsair AX650 Fractal Define R4 Logitech G5 
  hide details  
Reply
Silent But Deadly
(15 items)
 
  
CPUMotherboardGraphicsRAM
3570k @4.4 Gigabyte Z77X-UD3H Powercolor AMD 470 8GB Samsung 
Hard DriveCoolingCoolingOS
Cricual M4 64 / WD6400AAKS Silver Arrow SB-E Arctic Cooling 7970 7 64 Ultimate 
MonitorPowerCaseMouse
BenQ XL2410T Corsair AX650 Fractal Define R4 Logitech G5 
  hide details  
Reply
post #1576 of 6656
Quote:
Originally Posted by coolhandluke41 View Post

You are not the only one bro ..same here ,tested 4 different sets of RAM (they are all capable of going above 2400) with no avail ,it all comes down to your CPU's IMC
as far as i know there is very few retail Ivy chips that will do 2800+ and some will have trouble reaching 2600= it's a roll of the dice with this chips

So you think it's down to the cpu, huh? Well maybe you're right, I don't know. All these glowing reviews and what, they're binning cpu's/ram to get there?
When you can drop a 1600 Samsung green in a Sandy Bridge rig and get 2133 right out of the gate it sure makes these look poor.
post #1577 of 6656
well, i figure its time for me to post here.

z77 ud5h (running latest beta bios)
3770k
4x4gb Samsung ddr3 Green 30nm
Corsair hx850

Ran memtest on each stick for 8 hours, then all 4 sticks for 24 hours (why so long? because I was having issues)

Finally figured out that the board was resetting the voltage to 1.5v after every time i shut down and started up. It would SHOW that i chose 1.35 but it would read 1.5 on the bios and every program

The latest bios update solved this, but I cannot seem to get stable on hyperpi / IBT / Linx / prime95. I was able to get it to run consistently using 11/11/11/28/2t @ 1.355v @ 1866 on hyperpi / IBT / Linx but it fails on prime95.

This is my 2nd board (as gb told me to return the first one). And to double check the cpu and ram i installed it on my friends asus (he wasnt happy about that) and it was able to run all tests fine and even the ram ran at 9/9/9/24/1t @ 1.35v @ 2000. But for some reason it will not work consistently on the ud5h at 11/11/11/28/2t. Even at 11/11/11/28 @ 1600 it fails some tests what seems randomly.

Also, it seems that 10% of the time (rough guess on my brief experience) that once the computer boots and goes into windows, after 5-10 seconds it just stops. Everything is on, computer is on, screen is on showing desktop, but keyboard/mouse do nothing. Tried changing 3 different keyboards, 3 different mice, seems to do this randomly.

I noticed a few others with this ram combo, what timings/settings are you running?

oh forgot to note, cpu is stock. I want to get the highest settings for ram possible at or near the 1.35v as i figure the gains are minute
Edited by Silver5656 - 5/25/12 at 4:53pm
My Rig
(11 items)
 
  
CPUMotherboardGraphicsRAM
3770k Gigabyte z77x-ud5h Gigabyte 670gtx (not yet installed) 4x4GB Samsung 30nm DDr3 
Hard DriveCoolingOSMonitor
Crucial M4 256GB Super Mega + push/pull AP-15s Windows 7 Pro sp1 3xDell u2412m 
PowerCaseAudio
Corsair 850hx Silverstone FT-02bw KRK Rokit 6 G2 
  hide details  
Reply
My Rig
(11 items)
 
  
CPUMotherboardGraphicsRAM
3770k Gigabyte z77x-ud5h Gigabyte 670gtx (not yet installed) 4x4GB Samsung 30nm DDr3 
Hard DriveCoolingOSMonitor
Crucial M4 256GB Super Mega + push/pull AP-15s Windows 7 Pro sp1 3xDell u2412m 
PowerCaseAudio
Corsair 850hx Silverstone FT-02bw KRK Rokit 6 G2 
  hide details  
Reply
post #1578 of 6656
Thread Starter 
why don't you set stock timings and then go down to the third timings, most of them are 3s or 1s, then change them all to 7s and 6s or 8s and 7s. That is the big difference between the asus and GB boards in terms of stock memory performance, GB tightens up those third timings for better performance so in efficiency the GB is very good. Did you try two sticks by themselves? Also there is no XMP for the Samsung green, I asked for one but they still didn't make it yet, that could also have something to do with it. but you should be able to run that memory fine.

Try these settings from my OC guide, youc an try 9-9-9-24 i got those timings to work at 1600mhz. What is also funny is that the samsungs are the only ones that at stock run 1600mhz without any change.

646
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #1579 of 6656
Thread Starter 
Quote:
Originally Posted by Silver5656 View Post

well, i figure its time for me to post here.
z77 ud5h (running latest beta bios)
3770k
4x4gb Samsung ddr3 Green 30nm
Corsair hx850
Ran memtest on each stick for 8 hours, then all 4 sticks for 24 hours (why so long? because I was having issues)
Finally figured out that the board was resetting the voltage to 1.5v after every time i shut down and started up. It would SHOW that i chose 1.35 but it would read 1.5 on the bios and every program
The latest bios update solved this, but I cannot seem to get stable on hyperpi / IBT / Linx / prime95. I was able to get it to run consistently using 11/11/11/28/2t @ 1.355v @ 1866 on hyperpi / IBT / Linx but it fails on prime95.
This is my 2nd board (as gb told me to return the first one). And to double check the cpu and ram i installed it on my friends asus (he wasnt happy about that) and it was able to run all tests fine and even the ram ran at 9/9/9/24/1t @ 1.35v @ 2000. But for some reason it will not work consistently on the ud5h at 11/11/11/28/2t. Even at 11/11/11/28 @ 1600 it fails some tests what seems randomly.
Also, it seems that 10% of the time (rough guess on my brief experience) that once the computer boots and goes into windows, after 5-10 seconds it just stops. Everything is on, computer is on, screen is on showing desktop, but keyboard/mouse do nothing. Tried changing 3 different keyboards, 3 different mice, seems to do this randomly.
I noticed a few others with this ram combo, what timings/settings are you running?
oh forgot to note, cpu is stock. I want to get the highest settings for ram possible at or near the 1.35v as i figure the gains are minute

BTW the guy above you, yor_ got the memory working at 1866 with 4 sticks.
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #1580 of 6656
Quote:
Originally Posted by Sin0822 View Post

why don't you set stock timings and then go down to the third timings, most of them are 3s or 1s, then change them all to 7s and 6s or 8s and 7s. That is the big difference between the asus and GB boards in terms of stock memory performance, GB tightens up those third timings for better performance so in efficiency the GB is very good. Did you try two sticks by themselves? Also there is no XMP for the Samsung green, I asked for one but they still didn't make it yet, that could also have something to do with it. but you should be able to run that memory fine.
Try these settings from my OC guide, youc an try 9-9-9-24 i got those timings to work at 1600mhz. What is also funny is that the samsungs are the only ones that at stock run 1600mhz without any change.
646

will give that a try tonight and will post up. I tried looking up what those timings meant but could not find any good info but will give it a shot. I did try running 2 sticks only and also had the same issues although it seems to run prime much longer before having errors (ie 2 hours instead of 20 minutes)

I also have to congratulate you. Your willingness to help seems to go above and beyond any paid customer service rep i've seen. I am currently going through the 100+ pages to read up on any info and your responses seem to be helpful and quick. Add me to the list of thanks
My Rig
(11 items)
 
  
CPUMotherboardGraphicsRAM
3770k Gigabyte z77x-ud5h Gigabyte 670gtx (not yet installed) 4x4GB Samsung 30nm DDr3 
Hard DriveCoolingOSMonitor
Crucial M4 256GB Super Mega + push/pull AP-15s Windows 7 Pro sp1 3xDell u2412m 
PowerCaseAudio
Corsair 850hx Silverstone FT-02bw KRK Rokit 6 G2 
  hide details  
Reply
My Rig
(11 items)
 
  
CPUMotherboardGraphicsRAM
3770k Gigabyte z77x-ud5h Gigabyte 670gtx (not yet installed) 4x4GB Samsung 30nm DDr3 
Hard DriveCoolingOSMonitor
Crucial M4 256GB Super Mega + push/pull AP-15s Windows 7 Pro sp1 3xDell u2412m 
PowerCaseAudio
Corsair 850hx Silverstone FT-02bw KRK Rokit 6 G2 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)