Originally Posted by jpastuch
Hey everyone, just joined this forum to address a problem in my new build.
I'm using the Z77X-D3H board with Win 7. Everything was going pretty good on it, good temps, stable, etc.
A few hours in, the mobo starts sounding this high pitched tone. I see no warning on screen so I look in my case and the CPU fan is not spinning (I have the Hyper 212 EVO) so I shut the PC off immediately.
At first I thought it was the fan...I have not tested it yet but spins fine when I push it. This problem did not happen until I installed the drivers disc that came with the board, and I read a review on Newegg that brought up the same exact problem.
Was just wondering if this is a known issue, I'd love it to be software related rather than replacing the fan. But really I'm mostly scared I have a faulty CPU header.
CPU fan not spinning is not good. Hopefully you shutdown before damaged anything (i.e., cpu, etc.). Try installing the stock cpu heatsink and be ready to do a fast shutdown if that cpu fan doesn't spin right away. If possible, plug the Hyper 212 EVO into one of the other fan headers and see if its fan comes on when you do a start up.
Originally Posted by grizindabox
Just notified by Gigabyte that my board is on its way home...hoping for the best
Glad to hear. Once you get it back and put together, post back and let us know how things worked out.
Originally Posted by gooface
Just got this:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: ntoskrnl.exe
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
*** STOP: 0x0000000a (0x0000000000000000, 0x0000000000000002, 0x0000000000000000,
*** ntoskrnl.exe - Address 0xfffff80002cdd1c0 base at 0xfffff80002c5e000 DateStamp
Got this while gaming on BF3, never got this before.
Running at 4.2ghz, 2400mhz RAM (XMP profile 1)
Do I need to increase VTT volts? (set as Auto right now)
Likely instability with OC. Try setting all back to optimized default and then run game to see if you still get error message. If you do, then you should pull all your memory and test each stick individually with memtest.
Originally Posted by EvgeniX
3D power menu does not work or something changed.....
does not matter what I set LLC low, high or else it drop VCORE on 1+ volt
from 1.37 to 1.274 on full load..... bug or how its work now?????
I think it would be more helpful if you provided more information as to what problem you are experiencing as just reposting the same exact thing is not useful.